prEN 1094-1
(Main)Insulating refractory products - Part 1: Terminology for soluble high temperature fibre products
Insulating refractory products - Part 1: Terminology for soluble high temperature fibre products
This European Standard defines terms for those refractory products and materials which are classed as ceramic fibre products.
Feuerfeste Erzeugnisse für Wärmedämmzwecke - Teil 1: Terminologie für lösliche Hochtemperatur-Fasererzeugnisse
Produits réfractaires isolants - Partie 1: Terminologie des produits de fibres céramiques solubles à haute température
Toplotnoizolacijski ognjevzdržni izdelki - 1. del: Izrazi za topne visokotemperaturne vlaknene izdelke
General Information
Relations
Standards Content (Sample)
SLOVENSKI oSIST prEN 1094-1:2005
PREDSTANDARD
maj 2005
Toplotnoizolacijski ognjevzdržni izdelki - 1. del: Izrazi za topne
visokotemperaturne vlaknene izdelke
Insulating refractory products - Part 1: Terminology for soluble high temperature
fibre products
ICS 01.040.81; 81.080 Referenčna številka
oSIST prEN 1094-1:2005(en)
© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD
DRAFT
prEN 1094-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2005
ICS Will supersede EN 1094-1:1997
English version
Insulating refractory products - Part 1: Terminology for soluble
high temperature fibre products
Produits refractaires isolants - Partie 1: Terminologie des Feuerfeste Erzeugnisse für Wärmedämmzwecke - Teil 1:
produits de fibres ceramiques Terminologie für lösliche Hochtemperatur-
Fasererzeugnisse
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 187.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 1094-1:2005: E
worldwide for CEN national Members.
---------------------- Page: 2 ----------------------
prEN 1094-1:2005 (E)
Contents Page
Foreword.3
1 Scope .4
2 Definitions .4
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.