EN ISO 20847:2004
(Main)Petroleum products - Determination of sulfur content of automotive fuels - Energy-dispersive X-ray fluorescence spectrometry (ISO 20847:2004)
Petroleum products - Determination of sulfur content of automotive fuels - Energy-dispersive X-ray fluorescence spectrometry (ISO 20847:2004)
ISO 20847:2004 specifies an energy dispersive X-ray fluorescence (EDXRF) test method for the determination of the sulfur content of motor gasolines, including those containing up to 2,7 % (m/m) oxygen, and of diesel fuels, including those containing up to 5 % (V/V) fatty acid methylester (FAME), having sulfur contents in the range 30 mg/kg to 500 mg/kg. Other products may be analysed and other sulfur contents may be determined according to this test method, however, no precision data for products other than automotive fuels and for results outside the specified range have been established for ISO 20847:2004. For reasons of spectral overlap, ISO 20847:2004 is not applicable to leaded motor gasolines, lead-replacement gasolines containing 8 mg/kg potassium to 20 mg/kg potassium, or to products and feedstocks containing lead, silicon, phosporus, calcium, potassium or halides at concentrations greater than one-tenth of the concentration of sulfur measured.
Mineralölerzeugnisse - Bestimmung des Schwefelgehaltes von Kraftstoffen für Kraftfahrzeurge - Energiedispersive Röntgenfluoreszenz-Spektrometrie (ISO 20847:2004)
Diese Internationale Norm legt ein energiedispersives Röntgenfluoreszenz-Verfahren zur Bestimmung des Schwefelgehalts von Autokraftstoffen, d.h. von Ottokraftstoffen mit bis zu 2,7 % (m/m) Sauerstoffanteil sowie von Dieselkraftstoffen mit bis zu 5 % (V/V) Fettsäuremethylester (FAME), mit Schwefelanteilen im Bereich von 30 mg/kg bis 500 mg/kg fest. Andere Produkte mit anderen Schwefelgehalten können mit diesem Prüfverfahren ebenfalls untersucht werden, jedoch sind weder für andere Produkte als Automobilkraftstoffe sowie für andere Schwefelgehalte für diese Internationale Norm Präzisionsangaben ermittelt worden. Aufgrund spektraler Überlappungen ist diese Internationale Norm auf verbleite Motorbenzine und Bleiersatz-Benzine mit 8 mg/kg Kalium bis 20 mg/kg Kalium und auf Produkte und Raffinerie-Einsatzprodukte, die Blei, Silizium, Phosphor, Calcium, Kalium oder Halogene in Konzentrationen von mehr als einem Zehntel des gemessenen Schwefelgehaltes enthalten, nicht anwendbar.
ANMERKUNG Für die Zwecke der vorliegenden Internationalen Norm ist unter �% (m/m)" der Massenanteil in Prozent sowie unter �% (V/V)" der Volumenanteil in Prozent einer Substanz zu verstehen.
Produits pétroliers - Détermination de la teneur en soufre des carburants pour automobiles - Spectrométrie de fluorescence de rayons X dispersive en énergie (ISO 20847:2004)
L'ISO 20847:2004 spécifie une méthode d'essai par fluorescence de rayons X dispersive en énergie (FXDE) pour le dosage du soufre dans les essences pour automobiles, y compris celles contenant jusqu'à 2,7 % (m/m) en oxygène, et les carburants diesels (gazoles), y compris ceux contenant jusqu'à 5 % (V/V) d'esters méthyliques d'acide gras (EMAG), dont les teneurs se trouvent dans le domaine de 30 mg/kg à 500 mg/kg. D'autres produits peuvent être analysés et d'autres teneurs en soufre peuvent être déterminées suivant cette méthode; cependant, il n'a pas été établi de données de fidélité pour des produits autres que les carburants pour automobiles et pour des résultats en dehors de la gamme spécifiée pour l'ISO 20847:2004. En raison de recouvrements spectraux, l'ISO 20847:2004 n'est pas applicable aux essences pour automobiles contenant du plomb, ni aux essences contenant un substitut du plomb dont la teneur en potassium se situe de 8 mg/kg à 20 mg/kg, ni aux produits et charges contenant du plomb, du silicium, du phosphore, du calcium, du potassium ou des halogénures à des concentrations qui dépassent le dixième de la teneur en soufre mesurée.
Naftni proizvodi - Določevanje žvepla v gorivih za motorna vozila - Metoda z energijsko-disperzivno rentgensko fluorescenčno spektrometrijo (ISO 20847:2004)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2004
1DIWQLSURL]YRGL'RORþHYDQMHåYHSODYJRULYLK]DPRWRUQDYR]LOD0HWRGD]
HQHUJLMVNRGLVSHU]LYQRUHQWJHQVNRIOXRUHVFHQþQRVSHNWURPHWULMR ,62
Petroleum products - Determination of sulfur content of automotive fuels - Energy-
dispersive X-ray fluorescence spectrometry (ISO 20847:2004)
Mineralölerzeugnisse - Bestimmung des Schwefelgehaltes von Kraftstoffen für
Kraftfahrzeurge - Energiedispersive Röntgenfluoreszenz-Spektrometrie (ISO
20847:2004)
Produits pétroliers - Détermination de la teneur en soufre des carburants pour
automobiles - Spectrométrie de fluorescence de rayons X dispersive en énergie (ISO
20847:2004)
Ta slovenski standard je istoveten z: EN ISO 20847:2004
ICS:
75.160.20 7HNRþDJRULYD Liquid fuels
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 20847
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2004
ICS 75.080; 75.160.30
English version
Petroleum products - Determination of sulfur content of
automotive fuels - Energy-dispersive X-ray fluorescence
spectrometry (ISO 20847:2004)
Produits pétroliers - Détermination de la teneur en soufre Mineralölerzeugnisse - Bestimmung des Schwefelgehalts
des carburants pour automobiles - Spectrométrie de von Automobilkraftstoffen - Energiedispersive
fluorescence de rayons X dispersive en énergie (ISO Röntgenfluoreszenz-Spektrometrie (ISO 20847:2004)
20847:2004)
This European Standard was approved by CEN on 1 March 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2004 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 20847:2004 E
worldwide for CEN national Members.
Foreword
This document (EN ISO 20847:2004) has been prepared by Technical Committee ISO/TC 28
"Petroleum products and lubricants" in collaboration with Technical Committee CEN/TC 19
"Petroleum products, lubricants and related products", the secretariat of which is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by September 2004, and conflicting national
standards shall be withdrawn at the latest by September 2004.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Endorsement notice
The text of ISO 20847:2004 has been approved by CEN as EN ISO 20847:2004 without any
modifications.
INTERNATIONAL ISO
STANDARD 20847
First edition
2004-03-15
Petroleum products — Determination of
sulfur content of automotive fuels —
Energy-dispersive X-ray fluorescence
spectrometry
Produits pétroliers — Détermination de la teneur en soufre des
carburants pour automobiles — Spectrométrie de fluorescence de
rayons X dispersive en énergie
Reference number
ISO 20847:2004(E)
©
ISO 2004
ISO 20847:2004(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2004
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2004 – All rights reserved
ISO 20847:2004(E)
Contents Page
Foreword. iv
Introduction . v
1 Scope. 1
2 Normative references . 1
3 Principle . 1
4 Reagents and materials. 2
5 Apparatus. 2
6 Sampling and sample handling . 3
7 Apparatus preparation. 3
8 Calibration. 4
9 Procedure. 6
10 Calculation. 6
11 Expression of results. 6
12 Precision . 6
13 Test report. 7
Annex A (informative) Interferences.8
Annex B (informative) Guidelines for measuring low sulfur contents (less than 100 mg/kg). 10
Bibliography . 11
ISO 20847:2004(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 20847 was prepared by Technical Committee ISO/TC 28, Petroleum products and lubricants.
iv © ISO 2004 – All rights reserved
ISO 20847:2004(E)
Introduction
This International Standard is directed specifically at the lower end of the concentration range covered in
ISO 8754 ([3] in the Bibliography), which covers sulfur contents from 0,01 % (m/m) up to 5,00 % (m/m). By
restriction of instrument type, a better signal to background ratio for sulfur K emission is assured and by the
use of matrix matched calibration standards or other means of matrix corrections (as detailed below), the
precision and accuracy of results for samples having varying C:H mass ratios and oxygen contents are
improved. A knowledge of the general composition of the sample for analysis is advantageous in obtaining the
best test result.
Where matrix matching is not used and where the C:H mass ratio of the test sample is known or can be
determined, accuracy may be improved by the use of the equation given in A.2.2 to correct the result to the
C:H mass ratio of the calibration standards, i.e. the reference diluent oil (4.1).
Some instruments include the capability for the separate measurement of scattered radiation from the X-ray
tube, and notes for information are provided in A.2.3 on the use of this scattered radiation for compensation
for matrix effects in the test sample.
INTERNATIONAL STANDARD ISO 20847:2004(E)
Petroleum products — Determination of sulfur content of
automotive fuels — Energy-dispersive X-ray fluorescence
spectrometry
WARNING — The use of this International Standard may involve hazardous materials, operations and
equipment. This International Standard does not purport to address all of the safety problems
associated with its use. It is the responsibility of the user of this International Standard to establish
appropriate safety and health practices and determine the applicability of regulatory limitations prior
to use.
1 Scope
This International Standard specifies an energy dispersive X-ray fluorescence (EDXRF) test method for the
determination of the sulfur content of motor gasolines, including those containing up to 2,7 % (m/m) oxygen,
and of diesel fuels, including those containing up to 5 % (V/V) fatty acid methyl ester (FAME), having sulfur
contents in the range 30 mg/kg to 500 mg/kg. Other products may be analysed and other sulfur contents may
be determined according to this test method; however, no precision data for products other than automotive
fuels and for results outside the specified range have been established for this International Standard. For
reasons of spectral overlap, this International Standard is not applicable to leaded motor gasolines,
lead-replacement gasolines containing 8 mg/kg potassium to 20 mg/kg potassium, or to products and
feedstocks containing lead, silicon, phosporus, calcium, potassium or halides at concentrations greater than
one-tenth of the concentration of sulfur measured.
NOTE For the purposes of this International Standard, the terms “% (m/m)” and “% (V/V)” are used to represent the
mass fraction and the volume fraction of a material, respectively.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
ISO 3170:2004, Petroleum liquids — Manual sampling
ISO 3171:1988, Petroleum liquids — Automatic pipeline sampling
3 Principle
The test portion, in a cup fitted with an X-ray transparent window, is placed in a beam of exciting radiation
from an X-ray tube. The intensity of the sulfur K characteristic X-radiation is measured, and the number of
accumulated counts is compared with a calibration curve constructed from sulfur standards covering the range
of sulfur contents under examination.
NOTE The exciting radiation may be either direct, or indirect via a secondary target.
SIST EN ISO 20847:200
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.