EN ISO 28927-5:2009
(Main)Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 5: Drills and impact drills (ISO 28927-5:2009)
Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 5: Drills and impact drills (ISO 28927-5:2009)
ISO 28927-5:2009 specifies a laboratory method for measuring hand-transmitted vibration emission at the handles of hand-held, power-driven drills and impact drills. It is a type-test procedure for establishing the magnitude of vibration in the gripping areas of a drill fitted with a drill bit. It is intended that the results be used to compare different models of the same type of machine.
ISO 28927-5:2009 is applicable to straight drills, drills with a pistol‑grip and angle drills intended for drilling holes with rotating or impact action in all kinds of materials (see Clause 5), driven pneumatically or by other means. It is not applicable to heavy-duty drills with a screw feed or drills driven by a combustion engine.
Handgehaltene motorbetriebene Maschinen - Messverfahren zur Ermittlung der Schwingungsemission - Teil 5: Bohrmaschinen und Schlagbohrmaschinen (ISO 28927-5:2009)
Dieser Teil von ISO 28927 legt ein Laborverfahren zur Messung der Hand-Arm-Schwingungen fest, die an den Handgriffen von handgehaltenen motorbetriebenen Bohrmaschinen und Schlagbohrmaschinen hervor-gerufen werden. Es handelt sich um ein Messverfahren zur Ermittlung der Schwingungs¬kennwerte (Schwingungs¬emissionswerte) an den Greif¬stellen der Bohrmaschine, in die ein Bohrer eingespannt ist. Der Zweck besteht darin, die Kennwerte zum Vergleich verschiedener Modelle derselben Maschinenart zu verwenden.
Dieser Teil von ISO 28927 gilt für Bohrmaschinen, die pneumatisch oder auf andere Weise angetrieben werden, in gerader Ausführung, in abgewinkelter Ausführung und für solche mit Pistolengriff (siehe Abschnitt 5) zum Bohren (mit und ohne Schlagwerk) von Löchern in Materialien aller Art. Er gilt nicht für Bohrgeräte, die an das Werkstück angeschraubt werden, und nicht für Bohrmaschinen mit Verbrennungs-motor.
ANMERKUNG Um eine Verwechslung zu vermeiden, wird in dieser Norm zwischen der (motorbetriebenen) Maschine und dem Werkzeug oder Einsatzwerkzeug strikt unter¬schieden.
Machines à moteur portatives - Méthodes d'essai pour l'évaluation de l'émission de vibrations - Partie 5: Perceuses et perceuses à percussion (ISO 28927-5:2009)
L'ISO 28927-5:2009 spécifie une méthode de mesure en laboratoire des émissions de vibrations transmises aux mains s'exerçant au niveau des poignées des perceuses et des perceuses à percussion à moteur tenues à la main. Il s'agit d'une méthode d'essai de type définissant l'amplitude des vibrations aux zones de préhension d'une perceuse avec un foret. Il est prévu d'utiliser les résultats pour comparer différents modèles du même type de machine.
L'ISO 28927:2009 s'applique aux perceuses droites, perceuses à poignée revolver et perceuses d'angles, utilisées pour percer des trous sur tous les types de matériaux par rotation ou par percussion, pneumatiques ou entraînées par un autre dispositif. Elle ne s'applique pas aux perceuses à grand rendement à vis sans fin ou aux perceuses entrainées par un moteur à combustion.
Ročna prenosna električna orodja - Preskusne metode za vrednotenje oddajanja vibracij - 5. del: Vrtalniki in udarni (vibracijski) vrtalniki (ISO 28927-5:2009)
Ta del ISO 28927 določa laboratorijsko metodo merjenja emisij ročnega oddajanja vibracij na ročajih ročnih električnih vrtalnikov ali udarnih (vibracijskih) vrtalnikov. To je postopek tipskega preskusa za vzpostavljanje razsežnosti vibracij v območju držanja vrtalnika z nameščeno vrtalno krono. Namenjen je temu, da se rezultati uporabijo za primerjavo različnih modelov strojev istega tipa. Ta del ISO 28927 velja za ravne vrtalnike, vrtalnike z ročajem v obliki pištole in kotnimi vrtalniki, namenjenimi za vrtanje lukenj z rotacijsko ali udarno akcijo v vse vrste materialov (glej Klavzulo 5), pnevmatično ali kako drugače gnane. Ne velja za svedre za velike obremenitve z vijačnim polnjenjem ali svedre, ki jih poganja motor z notranjim izgorevanjem.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-februar-2010
1DGRPHãþD
SIST EN ISO 8662-6:2000
5RþQDSUHQRVQDHOHNWULþQDRURGMD3UHVNXVQHPHWRGH]DYUHGQRWHQMHRGGDMDQMD
YLEUDFLMGHO 9UWDOQLNLLQXGDUQL YLEUDFLMVNL YUWDOQLNL ,62
Hand-held portable power tools - Test methods for evaluation of vibration emission - Part
5: Drills and impact drills (ISO 28927-5:2009)
Handgehaltene motorbetriebene Maschinen - Messverfahren zur Ermittlung der
Schwingungsemission - Teil 5: Bohrmaschinen und Schlagbohrmaschinen (ISO 28927-
5:2009)
Machines à moteur portatives - Méthodes d'essai pour l'évaluation de l'émission de
vibrations - Partie 5: Perceuses et perceuses à percussion (ISO 28927-5:2009)
Ta slovenski standard je istoveten z: EN ISO 28927-5:2009
ICS:
13.160 Vpliv vibracij in udarcev na Vibration and shock with
ljudi respect to human beings
25.140.01 5RþQDRURGMDQDVSORãQR Hand-held tools in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 28927-5
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2009
ICS 13.160; 25.140.10 Supersedes EN ISO 8662-6:1995
English Version
Hand-held portable power tools - Test methods for evaluation of
vibration emission - Part 5: Drills and impact drills (ISO 28927-
5:2009)
Machines à moteur portatives - Méthodes d'essai pour Handgehaltene motorbetriebene Maschinen -
l'évaluation de l'émission de vibrations - Partie 5: Messverfahren zur Ermittlung der Schwingungsemission -
Perceuses et perceuses à percussion (ISO 28927-5:2009) Teil 5: Bohrmaschinen und Schlagbohrmaschinen (ISO
28927-5:2009)
This European Standard was approved by CEN on 14 December 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 28927-5:2009: E
worldwide for CEN national Members.
Contents Page
Foreword .3
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 98/37/EC, amended by Directive 98/79/EC .4
Annex ZB (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 2006/42/EC .5
Foreword
This document (EN ISO 28927-5:2009) has been prepared by Technical Committee ISO/TC 118
"Compressors and pneumatic tools, machines and equipment" in collaboration with Technical Committee
CEN/TC 231 “Mechanical vibration and shock” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by June 2010, and conflicting national standards shall be withdrawn at
the latest by June 2010.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 8662-6:1995.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directives.
For relationship with EU Directives, see informative Annex ZA and ZB, which are integral parts of this
document.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 28927-5:2009 has been approved by CEN as a EN ISO 28927-5:2009 without any
modification.
Annex ZA
(informative)
Relationship between this European Standard and the Essential
Requirements of EU Directive 98/37/EC, amended by Directive 98/79/EC
This European Standard has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association to provide a means of conforming to Essential Requirements of the
New Approach Directive 98/37/EC, Machinery, amended by Directive 98/79/EC.
Once this standard is cited in the Official Journal of the European Union under that Directive and has been
implemented as a national standard in at least one Member State, compliance with the normative clauses of
this standard confers, within the limits of the scope of this standard, a presumption of conformity with the
corresponding Essential Requirements of that Directive, except ER 1.7.4 d) and 2.2, and associated EFTA
regulations.
WARNING — Other requirements and other EU Directives may be applicable to the products falling
within the scope of this standard.
Annex ZB
(informative)
Relationship between this European Standard and the Essential
Requirements of EU Directive 2006/42/EC
This European Standard has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association to provide one means of conforming to Essential Requirements of
the New Approach Directive 2006/42/EC on machinery.
Once this standard is cited in the Official Journal of the European Union under that Directive and has been
implemented as a national standard in at least one Member State, compliance with the normative clauses of
this standard confers, within the limits of the scope of this standard, a presumption of conformity with the
corresponding Essential Requirement of that Directive, except ER 2.2.1.1, and associated EFTA regulations.
WARNING — Other requirements and other EU Directives may be applicable to the product(s) falling
within the scope of this standard.
INTERNATIONAL ISO
STANDARD 28927-5
First edition
2009-12-15
Hand-held portable power tools — Test
methods for evaluation of vibration
emission —
Part 5:
Drills and impact drills
Machines à moteur portatives — Méthodes d'essai pour l'évaluation de
l'émission de vibrations —
Partie 5: Perceuses et perceuses à percussion
Reference number
ISO 28927-5:2009(E)
©
ISO 2009
ISO 28927-5:2009(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2009
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2009 – All rights reserved
ISO 28927-5:2009(E)
Contents Page
Foreword .iv
Introduction.vi
1 Scope.1
2 Normative references.1
3 Terms, definitions and symbols .2
3.1 Terms and definitions .2
3.2 Symbols.3
4 Basic standards and vibration test codes .3
5 Description of the family of machines .3
6 Characterization of vibration.6
6.1 Direction of measurement .6
6.2 Location of measurements.6
6.3 Magnitude of vibration.10
6.4 Combination of vibration directions.10
7 Instrumentation requirements.10
7.1 General .10
7.2 Mounting of transducers .10
7.3 Frequency weighting filter.10
7.4 Integration time.10
7.5 Auxiliary equipment .11
7.6 Calibration.11
8 Testing and operating conditions of the machinery.11
8.1 General .11
8.2 Operating conditions .11
8.3 Other quantities to be specified.12
8.4 Attached equipment, work piece and task.12
8.5 Operator.14
9 Measurement procedure and validity.14
9.1 Reported vibration values .14
9.2 Declaration and verification of the vibration emission value .15
10 Measurement report .15
Annex A (informative) Model test report for vibration emission of drills and impact drills.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.