EN ISO 12017:2021
(Main)Plastics - Poly(methyl methacrylate) double- and triple-skin sheets - Test methods (ISO 12017:2021)
Plastics - Poly(methyl methacrylate) double- and triple-skin sheets - Test methods (ISO 12017:2021)
This document specifies the test methods for quality control of poly(methyl methacrylate) (PMMA) extruded double- and triple-skin flat sheets, obtained from colourless and coloured transparent, translucent and opaque grades of materials.
The minimum sheet width is 600 mm.
The main applications of these sheets are in building and agriculture (greenhouses).
Kunststoffe - Poly(methyl methacrylat) Stegdoppel- und Stegdreifachplatten - Prüfverfahren (ISO 12017:2021)
Dieses Dokument legt die Prüfverfahren zur Qualitätskontrolle von extrudierten, flachen Polymethylmethacrylat (PMMA)-Stegdoppel- und -Stegdreifachplatten, die aus farblosen und eingefärbten durchsichtigen, durchscheinenden und undurchsichtigen Werkstoffen hergestellt sind.
Die minimale Breite der Platten beträgt 600 mm.
Die Hauptanwendungsbereiche dieser Platten sind in Gebäuden und in der Landwirtschaft (Gewächshäuser).
Plastiques - Plaques de poly(méthacrylate de méthyle) à double et triple paroi - Méthodes d'essai (ISO 12017:2021)
Le présent document prescrit les méthodes d’essai nécessaires pour le contrôle de la qualité des plaques de poly(méthacrylate de méthyle) (PMMA) plates extrudées avec deux ou trois parois, obtenues à partir de matériaux de grade incolore, transparent coloré, translucide ou opaque.
La largeur minimale de la plaque est de 600 mm.
Les principales applications de ces plaques sont la construction et l’agriculture (réalisation de serres horticoles).
Polimerni materiali - Dvo- in triplastne plošče iz polimetilmetakrilata - Preskusne metode (ISO 12017:2021)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 12017:2021
01-september-2021
Nadomešča:
SIST EN ISO 12017:1999
Polimerni materiali - Dvo- in triplastne plošče iz polimetilmetakrilata - Preskusne
metode (ISO 12017:2021)
Plastics - Poly(methyl methacrylate) double- and triple-skin sheets - Test methods (ISO
12017:2021)
Kunststofffe - Poly(methyl methacrylat) Stegdoppel- und Stegdreifachplatten -
Prüfverfahren (ISO 12017:2021)
Plastiques - Plaques de poly(méthacrylate de méthyle) à double et triple paroi -
Méthodes d'essai (ISO 12017:2021)
Ta slovenski standard je istoveten z: EN ISO 12017:2021
ICS:
83.140.10 Filmi in folije Films and sheets
SIST EN ISO 12017:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 12017:2021
---------------------- Page: 2 ----------------------
SIST EN ISO 12017:2021
EN ISO 12017
EUROPEAN STANDARD
NORME EUROPÉENNE
July 2021
EUROPÄISCHE NORM
ICS 83.140.10 Supersedes EN ISO 12017:1996
English Version
Plastics - Poly(methyl methacrylate) double- and triple-
skin sheets - Test methods (ISO 12017:2021)
Plastiques - Plaques de poly(méthacrylate de méthyle) Kunststoffe - Poly(methyl methacrylat) Stegdoppel-
à double et triple paroi - Méthodes d'essai (ISO und Stegdreifachplatten - Prüfverfahren (ISO
12017:2021) 12017:2021)
This European Standard was approved by CEN on 17 July 2021.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 12017:2021 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 12017:2021
EN ISO 12017:2021 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 12017:2021
EN ISO 12017:2021 (E)
European foreword
This document (EN ISO 12017:2021) has been prepared by Technical Committee ISO/TC 61 "Plastics"
in collaboration with Technical Committee CEN/TC 249 “Plastics” the secretariat of which is held by
NBN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by January 2022, and conflicting national standards shall
be withdrawn at the latest by January 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 12017:1996.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN websites.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 12017:2021 has been approved by CEN as EN ISO 12017:2021 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 12017:2021
---------------------- Page: 6 ----------------------
SIST EN IS
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.