iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 13020:2004/FprA1

(Amendment)

Road surface treatment machines - Safety requirements

Road surface treatment machines - Safety requirements

Maschinen für die Straßenoberflächenbehandlung - Sicherheitsanforderungen

Machines pour le traitement des surfaces routières - Prescriptions de sécurité

Stroji za obdelovanje cestišč - Varnostne zahteve

General Information

Status
Not Published
ICS
91.220 - Construction equipment
93.080.10 - Road construction
Technical Committee
CEN/TC 151 - Construction equipment and building material machines - Safety
Drafting Committee
CEN/TC 151/WG 5 - Road construction machines - Safety
Current Stage
5060 - Closure of Vote - Formal Approval
Start Date
20-Jan-2010
Completion Date
20-Jan-2010
Directive
2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
98/37/EC - Machinery
Mandate
M/079 - Mandate to CEN and CENELEC for standardization in the field of machines
M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
Ref Project
SIST EN 13020:2005/kFprA1:2009 - Road surface treatment machines - Safety requirements

Relations

Merged Into
EN 13020:2004+A1:2010 - Road surface treatment machines - Safety requirements
Effective Date
30-Jan-2010
Amends
EN 13020:2004 - Road surface treatment machines - Safety requirements
Effective Date
22-Dec-2008

Buy Standard

EN 13020:2005/kFprA1:2009EN 13020:2005/kFprA1:2009
PreviousNext
Draft
EN 13020:2005/kFprA1:2009
English language
19 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-oktober-2009
6WURML]DREGHORYDQMHFHVWLãþ9DUQRVWQH]DKWHYH
Road surface treatment machines - Safety requirements
Maschinen für die Straßenoberflächenbehandlung - Sicherheitsanforderungen
Machines pour le traitement des surfaces routières - Prescriptions de sécurité
Ta slovenski standard je istoveten z: EN 13020:2004/FprA1
ICS:
93.080.10 Gradnja cest Road construction
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
FINAL DRAFT
EN 13020:2004
NORME EUROPÉENNE
EUROPÄISCHE NORM
FprA1
August 2009
ICS 91.220
English Version
Road surface treatment machines - Safety requirements
Machines pour le traitement des surfaces routières - Maschinen für die Straßenoberflächenbehandlung -
Prescriptions de sécurité Sicherheitsanforderungen
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 151.
This draft amendment A1, if approved, will modify the European Standard EN 13020:2004. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13020:2004/FprA1:2009: E
worldwide for CEN national Members.

Contents Page
Foreword .3
1 Modification to the Introduction .4
2 Modification to the Scope .4
3 Modification to Clause 2, Normative references .4
4 Modification to Clause 3, Terms and definitions .5
5 Modification to Clause 4, List of significant hazards .6
6 Modification to Clause 5, Safety requirements and/or measures .7
7 Modification to Clause 7, Information for use . 12
8 Modification to Clause 8, Marking. 12
9 Addition of a new Annex B . 13
10 Modification to Annex ZA . 17
11 Addition of a new Annex ZB . 18
12 Modification to the Bibliography . 18

Foreword
This document (EN 13020:2004/FprA1:2009) has been prepared by Technical Committee CEN/TC 151
“Construction equipment and building material machines - Safety”, the secretariat of which is held by DIN.
This document is currently submitted to the Unique Acceptance Procedure.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annexes ZA or ZB, which are integral parts of this
document.
1 Modification to the Introduction
st
In the 1 paragraph, replace "EN 1070" with "EN ISO 12100-1".
2 Modification to the Scope
st
In the 1 indent, replace "sprayers" with "binder sprayers [or sprayers]".
nd
In the 2 indent, replace "aggregate spreaders" with "chipping spreaders [or spreaders]".
rd
In the 3 indent, replace "(spot mix patching units)" with "(binder sprayer chipping spreader [or sprayer
spreader])".
th
Add the following indent as new 5 indent: "
 joint sealer;"
th
Replace the 6 indent with the following new indent:"
 micro-surfacing machines/slurry machines;"
th
In the 5 paragraph, add the following text as last sentence:
"Vibrations are not dealt with in the standard, because for all machines of this family vibration is not a relevant
hazard due to the low working speed and special working conditions (e.g. flat surface)."
th
Add the following text as new 7 paragraph:
"This document does not include requirements of the 94/55/EC Directive related to transport of dangerous
goods by road but contains additional specifications in link with these existing requirements."
th
Add a NOTE after the 7 paragraph:
"NOTE e.g. bitumen binder sprayers [or sprayers] are covered by the 94/55/EC Directive."
3 Modification to Clause 2, Normative references
Delete:
"EN 563:1994, Safety of machinery — Temperatures of touchable surfaces — Ergonomic data to establish
temperature limit values for hot surfaces"
"EN 1070:1998, Safety of machinery — Terminology"
Replace "EN 500-1:1995" with "EN 500-1:2006"
Replace "EN ISO 2860" with "EN ISO 2860:2008".
Replace "EN ISO 2867, Earth-moving machinery — Access systems (ISO 2867:1994)" with
"EN ISO 2867:2008, Earth-moving machinery — Access systems (ISO 2867:2006, including Cor 1:2008)".
Replace "EN ISO 3457:2003" with "EN ISO 3457:2008".
Replace "ISO 6750:1984, Earth-moving machinery — Operation and maintenance — Format and content of
manuals" with "ISO 6750:2005, Earth-moving machinery — Operator's manual — Content and format".
Add:
"EN 12999:2002, Cranes — Loader cranes"
"EN ISO 13732-1:2008, Ergonomics of the thermal environment — Methods for the assessment of human
responses to contact with surfaces — Part 1: Hot surfaces (ISO 13732-1:2006)
EN ISO 13857:2008, Safety of machinery - Safety distances to prevent hazard zones being reached by upper
and lower limbs (ISO 13857:2008)"
Replace the title of "EN ISO 12100-1:2003" with "Safety of machinery — Basic concepts, general principles for
design — Part 1: Basic terminology, methodology (ISO 12100-1:2003)".
4 Modification to Clause 3, Terms and definitions
st
In the 1 paragraph, replace "EN 1070:1998" with "EN ISO 12100-1:2003".
3.1
sprayer
Replace the term and definition with the following text:"
3.1
binder sprayer [or sprayer]
machine intended to spray automatically or manually a film of binder (bitumen/emulsion) on the road surface
at a predetermined rate. Storage of the binder is provided by tanks (tank type sprayers) mounted usually on a
carrier vehicle (see informative Annex B, Figure B.1) or by barrels (barrels type sprayers). The machine can
be mounted on a semi-trailer, a trailer (see informative Annex B, Figure B.2) or can be self-propelled
NOTE 1 Bitumen is a dangerous good in regard to TDG (94/55/EC -Transport of dangerous goods) regulation.
NOTE 2 Bitumen emulsion is a product with a temperature below 100 °C and out of the scope of TDG (94/55/EC -
Transport of dangerous goods) regulation."
3.2
aggregate spreader
Replace the term and definition with the following text: "
3.2
chipping spreader [or spreader]
machine used to spread a layer of chippings on the pavement at a predetermined rate (see informative annex)
Some of these machines can be equipped with a loading device (e.g. bucket, stick, boom).
NOTE Several types of chippings spreaders may be identified e.g. mounted on a carrier vehicle (truck) or self-
propelled."
3.3
spot mix patching unit
Replace the term and definition with the following text:"
3.3
binder sprayer chipping spreader [or sprayer spreader]
machine used for coating roads with binder (bitumen/emulsion) and with aggregates in a single operation"
3.4
mastic asphalt mixer
Replace at the end of definition "the mastic asphalt with direct or indirect heating" with "transporting, heating
(over 100 °C), mixing and discharging mastic asphalt. This machine can be mounted on a carrier-vehicle,
semi-trailer, trailer or can be self-propelled "
3.5
hot asphalt container
Delete.
Add following new term and definition:"
3.5
joint sealer
machine consisting of a tank with horizontal or vertical mixer and designed for melting and preparing mastics
(over 100 °C) that are used in treating roadway joints and cracks"
3.6
micro-asphalt paving machine
Replace the term and definition with the following text:"
3.6
micro-surfacing machines/slurry machines
machine usually mounted on a truck (or a semi-trailer) designed for the production of slurries and micro-
surfacing which contains all necessary components (e.g. emulsion, water, cement, additives) in separated
tanks"
3.7
demountable equipment
Add the following text at the end of sentence:
", e.g. chipping spreader or binder sprayer [or sprayer]"
5 Modification to Clause 4, List of significant hazards
In Table 1, replace the head of table with the following text:
"
Relevant clauses
Mastic
Binder
asphalt mixer Micro-
sprayer
Binder Chipping
and micro- surfacing
Hazards
spreader chipping
sprayer
surfacing machines/
[or
[or spreader [or
machines/ Slurry
spreader]
sprayer]
sprayer
Slurry machines
spreader]
machines
"
6 Modification to Clause 5, Safety requirements and/or measures
5.1 Introduction
nd
In the 2 paragraph, delete "EN 563 and".
Add "and EN ISO 13732-1"after "EN 982".
5.2 General and common requirements
5.2.3 Hot surfaces
Replace the heading of 5.2.3 with the following:
"5.2.3 Protective measures and devices"
Add new sub- clause:
"5.2.3.1 Hot parts"
st
In the 1 paragraph, replace "EN 563" with "EN ISO 13732-1".
st nd
In the 1 paragraph, add at the beginning of the 2 sentence the following: "Where necessary" and delete "e.
g. perforated plates in front of or around the hot surfaces), heat insulation of tanks and pipes or be positioned
to avoid unintended risk of contact".
rd
In the 3 sentence, add "spray bar," after "e. g.".
nd
In the 2 paragraph, add "the contact surface, e.g. handle, grip of" after "Temperatures of" and replace "EN
563" with "EN ISO 13732-1".
Add following new sub-clauses:
"5.2.3.2 Moving parts
All moving parts which create a hazard shall be designed, constructed, positioned or provided with protection
devices to minimise the risk of crushing, shearing and cutting.
The mobile parts shall be protected by protective devices or guards in accordance with EN ISO 13857.
Where guarding is impractical, e.g. spray bar, chips distributor extension, adequate warning signs shall be
employed advising on the nature of the risk and avoidance measures described in information for use.
5.2.3.3 Guards
5.2.3.3.1 General
Guards shall be designed to be securely held in place and prevent access to dangerous areas and parts
where a hazard exists.
Engine compartment panels are regarded as guards.
Guards shall comply with EN ISO 3457:2008.
5.2.3.3.2 Movable guards
Movable guards shall as far as possible remain attached to the machine when open.
Movable guards shall be fitted with a support system (e.g. springs, gas cylinders) to secure them in opened
position up to a wind speed of 8 m/s.
5.2.3.3.3 Fixed guards
Fixed guards that are to be removed as a part of maintenance described in the operators manual, shall be
fixed by systems that can be opened or removed only with tools. These guards fixing systems shall remain
attached to the guards or to the machinery when the guards are removed. Where possible, guards shall be
incapable of remaining in place without their fixings."
5.2.7 Attachment fittings
Replace the heading of 5.2.7 with the following:
"5.2.7 Attachment fittings/trailers"
st
In the 1 paragraph, replace "Attachment fittings" with "Attachment fittings/trailers".
Replace "NOTE" with "NOTE 1".
In NOTE 1, replace "ISO 730-1" with "ISO 730".
Add the following text after NOTE 1:
"There shall be an appropriate connection between a trailer and the machinery for the operation of signals.
NOTE 2 e.g. ISO 1724, ISO 1185, ISO 3731, ISO 12098 can be used as guidance."
5.2.8 Actuators
Add following new paragraphs at the end:
"From each control position, the operator shall be able to ensure that no-one is in the danger zones, or the
control system shall be designed and constructed in such a way that starting is prevented while someone is in
the danger zones.
If the visibility from the operator’s station to the rear is obstructed due to the design requirements or the
working application of the machine (e. g. spray spread
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 536:2015(Main)
Road construction machines - Mixing plants for road construction materials - Safety requirements
SIST EN 536:2015

This European Standard specifies the safety requirements applicable to stationary and relocatable mixing plants for the production of materials (e.g. hot-mix asphalt, cold-mix asphalt, cement gravel) used for the construction and maintenance of traffic routes (roads, highways, sidewalks, airfields, etc.) water retaining works, dam walls, culverts, etc.
This European Standard applies to the following types of mixing plant:
a)   hot Asphalt mixing plant;
b)   cold mixing plant (e.g. for production of cement gravel, cold mix asphalt);
c)   mixing plant for bituminous or non-bituminous reclaimed materials;
d)   mixing plant for mastic asphalt, also including natural asphalt.
Machines moving during the working process (e.g. mobile mastic asphalt mixers) and crushers are not covered by this European Standard.
Those types of asphalt mixing plants can also be combined or enlarged by additional installations (e.g. Plant for storage of binders (e.g. bituminous, synthetic, vegetal).
This European Standard deals with all significant hazards pertinent to mixing plants, when they are used as intended and under the conditions of misuse which are reasonably foreseen by the manufacturer (see Clause 4). This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards.
This European Standard does not apply to machines for the production of cement concrete and mortar as covered in EN 12151.
This European Standard does not deal with hazards caused by flammable gases. As soon as information is available it will be included.
This European Standard is not applicable to mixing plants for road construction materials, which are manufactured before the date of publication of this European Standard by CEN.

  • Standard
    60 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13862:2001/prA1(Amendment)
Floor cutting-off machines - Safety
SIST EN 13862:2002/kprA1:2008
  • Draft
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 536:2015(Main)
Road construction machines - Mixing plants for road construction materials - Safety requirements
SIST EN 536:2015

This European Standard specifies the safety requirements applicable to stationary and relocatable mixing plants for the production of materials (e.g. hot-mix asphalt, cold-mix asphalt, cement gravel) used for the construction and maintenance of traffic routes (roads, highways, sidewalks, airfields, etc.) water retaining works, dam walls, culverts, etc.
This European Standard applies to the following types of mixing plant:
a)   hot Asphalt mixing plant;
b)   cold mixing plant (e.g. for production of cement gravel, cold mix asphalt);
c)   mixing plant for bituminous or non-bituminous reclaimed materials;
d)   mixing plant for mastic asphalt, also including natural asphalt.
Machines moving during the working process (e.g. mobile mastic asphalt mixers) and crushers are not covered by this European Standard.
Those types of asphalt mixing plants can also be combined or enlarged by additional installations (e.g. Plant for storage of binders (e.g. bituminous, synthetic, vegetal).
This European Standard deals with all significant hazards pertinent to mixing plants, when they are used as intended and under the conditions of misuse which are reasonably foreseen by the manufacturer (see Clause 4). This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards.
This European Standard does not apply to machines for the production of cement concrete and mortar as covered in EN 12151.
This European Standard does not deal with hazards caused by flammable gases. As soon as information is available it will be included.
This European Standard is not applicable to mixing plants for road construction materials, which are manufactured before the date of publication of this European Standard by CEN.

  • Standard
    60 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13862:2001/prA1(Amendment)
Floor cutting-off machines - Safety
SIST EN 13862:2002/kprA1:2008
  • Draft
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17339:2024(Main)
Transportable gas cylinders – Hoop wrapped and fully wrapped carbon composite cylinders and tubes for hydrogen
kSIST FprEN 17339:2024

This document specifies minimum requirements for the materials, design, construction, prototype testing and routine manufacturing inspections of composite gas cylinders and tubes for compressed hydrogen.
NOTE 1 Unless specified in the text, for the purposes of this document, the word “cylinder” includes tubes.
This document applies to
-   fully wrapped composite cylinders (Type 3 and Type 4)
-   hoop wrapped cylinders (Type 2)
with carbon fibres intended to be permanently mounted in a frame (e.g. bundle or trailer) with a test pressure of not less than 300 bar, with:
— non-metallic liners (for Type 4) or seamless metallic liners (for Type 2 and Type 3),
— a maximum water capacity of 3 000 l
— a maximum working pressure of 1 000 bar.
— the product of working pressure times water capacity (p x V) not exceeding 1 000 000 bar.l.
NOTE 2 A glass fibre protective layer is sometimes applied to the external surface of the cylinder

  • Draft
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN ISO/TS 7552-2:2024(Main)
Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for circulating tumour cells (CTCs) in venous whole blood - Part 2: Isolated DNA (ISO/TS 7552-2:2024)
kSIST-TS FprCEN ISO/TS 7552-2:2024

This document specifies requirements and gives recommendations on the handling, storage, CTC enrichment and isolation, DNA isolation and storage, and documentation of venous whole blood specimens intended for the examination of DNA isolated from circulating tumour cells (CTCs) during the pre-examination phase before a molecular examination is performed.
This document is applicable to molecular in vitro diagnostic examinations including laboratory developed tests performed by medical laboratories. It is also intended to be used by laboratory customers, in vitro diagnostics developers and manufacturers, biobanks, institutions, and commercial organizations performing biomedical research, and regulatory authorities.
This document does not cover the isolation of genomic DNA directly from venous whole blood containing CTCs. This is covered in ISO 20186-2.
This document does not cover the isolation of specific white blood cells and subsequent isolation of genomic DNA therefrom or the pre-analytical workflow requirements for viable CTC cryopreservation and culturing.
NOTE 1        The requirements given in this document can also be applied to other circulating rare cells (e.g. foetal cells).
NOTE 2        International, national, or regional regulations or requirements can also apply to specific topics covered in this document.

  • Draft
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12520:2024(Main)
Furniture - Safety, strength and durability - Requirements for domestic seating
kSIST FprEN 12520:2024

This document specifies the minimum requirements for the safety, strength and durability of all types of domestic seating for adults. It also specifies additional test methods for seat side-to-side durability as well as finger entrapment and shear and compression.
It does not apply to ranked seating, seating for non-domestic use, office work chairs, chairs for educational institutions, outdoor seating and to links for linked seating for which European Standards exist.
It does not include requirements for the durability of upholstery materials, castors, reclining and tilting mechanisms and seat height adjustment mechanisms.
It does not include requirements for electrical safety.
It does not include requirements for the resistance to ageing, degradation, flammability and ergonomics.
The requirements are based on use by persons weighing up to 110 kg.
Annex A (normative) specifies the seat side-to-side durability test in D-G points.
Annex B (informative) gives rationales for some of the tests referred to in Table 1.
Annex C (normative) specifies the test methods for finger entrapment and shear and compression.
Annex D (normative) specifies the seat loading point for seating with suspended flexible material.

  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN ISO/TS 7552-3:2024(Main)
Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for circulating tumour cells (CTCs) in venous whole blood - Part 3: Preparations for analytical CTC staining (ISO/TS 7552-3:2024)
KSIST-TS FprCEN ISO/TS 7552-3:2024

This document specifies requirements and gives recommendations on the handling, storage, CTC enrichment, preparation for CTC staining, and documentation of venous whole blood specimens intended for staining of CTCs during the pre-examination phase before an examination is performed.
This document is applicable to molecular in vitro diagnostic examinations including laboratory developed tests performed by medical laboratories. It is also intended to be used by laboratory customers, in vitro diagnostics developers, and manufacturers, biobanks, institutions, and commercial organizations performing biomedical research, and regulatory authorities.
This document does not cover pre-analytical workflow requirements for viable CTC cryopreservation and culturing.
Different dedicated measures are taken for stabilizing CTCs genomic DNA and RNA that are not described in this document; they are covered in ISO 7552-1 and ISO 7552-2.
NOTE 1        The requirements given in this document can also be applied to other circulating rare cells (e.g. foetal cells).
NOTE 2        International, national or regional regulations or requirements can also apply to specific topics covered in this document.

  • Draft
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 81-31:2024(Main)
Safety rules for the construction and installation of lifts - Lifts for the transport of goods only - Part 31: Accessible goods only lifts
oSIST prEN 81-31:2022

1.1   This document specifies the safety rules for new accessible goods only lifts with traction, positive or hydraulic drive, permanently installed and only used by users (see 3.57), serving fixed and permanent landing levels, having a carrier made of a single load carrying area, designed for the transportation of goods only, moving along a fixed path by rigid guide rails and inclined not more than 15° to the vertical, with rated speed not exceeding 1 m/s.
This document covers accessible goods only lifts with rated load exceeding 300 kg and not intended to transport persons.
1.2   For the purpose of this document, a goods only lift carrier is regarded as accessible where one of the following conditions is satisfied:
a)   floor area of the carrier is greater than 1,0 m2;
b)   depth of the carrier is greater than 1,0 m;
c)   clear height of the carrier is greater than 1,20 m.
In case the carrier is without a roof, it is considered accessible when the clear height of the landing doors is greater than 1,20 m.
1.3   Two types of accessible goods only lifts are addressed:
a)   Type A, where the intended use is bound to the maximum rated speed of 0,30 m/s;
b)   Type B, where the intended use is bound to the maximum rated speed of 1,0 m/s.
1.4   In addition to the requirements of this document, supplementary requirements are to be considered in special cases (operation subject to ATEX rules, operational in ambiental condition not addressed by this standard, seismic conditions, transporting dangerous goods, etc.).
1.5   This document does not cover:
a)   accessible goods only lifts:
1)   with more than one lift machine;
i)   where loading and unloading is automated, or the carrier floor is fitted with mobile devices (e.g. rollers) for loading and unloading purposes;
ii)   intended to carry bulk loads (such as loose sand, gravel, etc.);
iii)   with drive systems other than those stated in 4.8;
b)   lifting tables according to EN 1570-1 and EN 1570-2;
c)   lifting appliances, such as appliances with more than one carrier, skips, goods only lifts for construction sites, for underground applications, mine winding gear, goods only lifts on seagoing vessels and mobile offshore units, construction and maintenance appliances in wind turbines, goods only lifts specially designed and constructed for research purposes for temporary use in laboratories, goods only lifts specially designed and constructed for military or police purposes;
d)   safety during operation of transport, erection, repairs and dismantling of accessible goods only lifts;
e)   the use of translucent material for the walls of the well and machinery spaces, for the carrier with the exception of the landing doors vision panels;
f)   the use of programmable electronic systems in safety related applications for lifts (PESSRAL);
g)   hydraulic lifts where the setting of the pressure relief valve exceeds 50 MPa;
h)   any form of radiation except EMC;
i)   fire propagation;
j)   energy dissipation type buffers;
k)   the possibility of two simultaneous acts of imprudence and/or the abuse of instructions for use.
l)   ambient temperature in the well and machinery spaces lower than +5 °C and higher than +40 °C;
m)   health and safety of animals.
However, this document can usefully be taken as a basis.
Noise and vibrations are not dealt with in this document as they are not considered a significant nor relevant hazard for the actual type of the accessible goods only lifts.
1.6   The requirements of this document are such that the possibility of a failure of an electric safety device or a safety component complying with all the requirements of this document needs not to be taken into consideration.
1.7   This document is not applicable to accessible goods only lifts which were manufactured before the date of its publication as EN.

  • Draft
    189 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1426:2024(Main)
Bitumens and bituminous binders - Determination of needle penetration
kSIST FprEN 1426:2024

This document specifies a method for the determination of the needle penetration of bitumens and bituminous binders.
The standard procedure for the determination of the needle penetration (consistency) is described for penetrations up to (330 × 0,1) mm at a temperature of 25 °C. The method also allows for penetrations up to (500 × 0,1) mm using a longer needle.
WARNING - The use of this document can involve hazardous materials, operations and equipment. This document does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this document to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.

  • Draft
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day