iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 13862:2001/prA1

(Amendment)

Floor cutting-off machines - Safety

Floor cutting-off machines - Safety

Bodentrennschleifmaschinen - Sicherheit

Machines à scier les sols - Sécurité

Talni odrezovalni stroji - Varnost

General Information

Status
Not Published
ICS
91.220 - Construction equipment
93.080.10 - Road construction
Technical Committee
CEN/TC 151 - Construction equipment and building material machines - Safety
Drafting Committee
CEN/TC 151/WG 6 - Machines and equipment to process building materials (portable, hand-guided, support-mounted, on rails or self-propelled) - Safety
Current Stage
5060 - Closure of Vote - Formal Approval
Start Date
14-Jan-2009
Completion Date
14-Jan-2009
Directive
2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
98/37/EC - Machinery
Mandate
M/079 - Mandate to CEN and CENELEC for standardization in the field of machines
M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
Ref Project
SIST EN 13862:2002/kprA1:2008 - Floor cutting-off machines - Safety

Relations

Merged Into
EN 13862:2001+A1:2009 - Floor cutting-off machines - Safety
Effective Date
28-Jan-2009
Amends
EN 13862:2001 - Floor cutting-off machines - Safety
Effective Date
22-Dec-2008

Buy Standard

EN 13862:2002/kprA1:2008EN 13862:2002/kprA1:2008
PreviousNext
Draft
EN 13862:2002/kprA1:2008
English language
15 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-december-2008
Talni odrezovalni stroji - Varnost
Floor cutting-off machines - Safety
Bodentrennschleifmaschinen - Sicherheit
Machines à scier les sols - Sécurité
Ta slovenski standard je istoveten z: EN 13862:2001/prA1
ICS:
93.080.10 Gradnja cest Road construction
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
FINAL DRAFT
EN 13862:2001
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
August 2008
ICS 93.080.10
English Version
Floor cutting-off machines - Safety
Machines à scier les sols - Sécurité Bodentrennschleifmaschinen - Sicherheit
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 151.
This draft amendment A1, if approved, will modify the European Standard EN 13862:2001. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13862:2001/prA1:2008: E
worldwide for CEN national Members.

Contents Page
Foreword.3
1 Modification to the Foreword .4
2 Modification to the Introduction.4
3 Modification to Clause 1, Scope.4
4 Modification to Clause 2, Normative references .4
5 Modification to Clause 3, Terms and definitions.6
6 Modification to Table 1 — List of significant hazards.6
7 Modification to Clause 5, Safety requirements and/or measures.6
8 Modification to 5.1.2.1, Transmission parts.6
9 Modification to 5.1.5, Transport and handling.6
10 Modification to 5.1.8.1, General.7
11 Modification to 5.2.1, General.7
12 Modification to 5.2.2, Water pump .7
13 Modification to 5.3, Thermal hazards .7
14 Modification to Clause 7, Information for use .7
15 Modification to Annex A (informative) Noise test code – Grade 2 of accuracy .8
16 Modification to Figure D.1.9
17 Addition of Annex F.10
18 Modification of Annex ZA .14
19 Addition of Annex ZB .15

Foreword
This document (EN 13862:2001/prA1:2008) has been prepared by Technical Committee CEN/TC 151
“Construction equipment and building material machines — Safety”, the secretariat of which is held by DIN.
This document is currently submitted to the Unique Acceptance Procedure.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annexes ZA or ZB, which are integral parts of this
document.
1 Modification to the Foreword
th
Replace the 5 paragraph with the following:
"For relationship with EU Directive(s), see informative Annexes ZA and ZB, which are integral parts of this
document.".
th
Delete the 6 paragraph "The annex A is normative and contains "Noise test code - Grade 2 of accuracy",
annex B is normative and contains "Dimensions of the flanges for cutting-off diamond wheels", annex C is
normative and contains "Strength of guards - State of the art concerning the characteristics of guards used
with cutting-off wheels", annex D is normative and contains "Pictograms“, the annex E is normative and
contains "Verification of surface temperature“ and the annex ZA is informative and contains "Relationship of
this document with EC Directives“.".
2 Modification to the Introduction
st
1 paragraph:
Replace "EN 292" with "EN ISO 12100-1:2003".
3 Modification to Clause 1, Scope
st st
1 paragraph, 1 sentence:
1)
Delete "self-propelled ride on and". Consequently, delete footnote to text 1).
th
5 paragraph:
Add as first indent: "
 self-propelled ride-on floor sawing machines;".
4 Modification to Clause 2, Normative references
Replace the standard paragraph with the following:
"The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.".
Replace "EN 953:1997" with "EN 953".
Replace "ISO 6395:1988" with "ISO 6395:2008".
Delete:
"EN 292-1:1991, Safety of machinery — Basic concepts, general principles for design — Part 1: Basic
terminology, methodology
EN 292-2:1991, Safety of machinery — Basic concepts, general principles for design — Part 2: Technical
principles and specifications",
"EN 563:1994, Safety of machinery — Temperatures of touchable surfaces — Ergonomic data to establish
temperature limit values for hot surfaces",
"EN 954-1:1996, Safety of machinery — Safety related parts of control systems — Part 1: General principles
of design" and
"EN 1070:1998, Safety of machinery — Terminology".
Replace: "prEN 13218:1998" with "EN 13218:2002".
Replace "EN 60204-1:1997, Safety of machinery — Electrical equipment of machines — Part 1: General
requirements (IEC 60204-1:1997)" with "EN 60204-1:2006, Safety of machinery — Electrical equipment of
machines — Part 1: General requirements (IEC 60204-1:2005, modified)".
Replace "EN 60335-1:1994, Safety of household and similar appliances — Part 1: General requirements (IEC
60335-1:1991, modified)" with "EN 60335-1:2002, Household and similar electrical appliances — Safety —
Part 1: General requirements (IEC 60033-1:2001, modified)".
Replace "EN 60335-2-41:1996, Safety of household and similar appliances — Part 2: Particular requirements
for electric pumps for liquid having a temperature not exceeding 35 °C (IEC 60335-2-41:1996)" with
"EN 60335-2-41:2003, Household and similar electrical appliances — Safety — Part 2-41: Particular
requirements for pumps (IEC 60335-2-41:2002)".
Replace "EN 61029-1:1995" with "EN 61029-1:2000".
Replace "EN ISO 3744:1995, Acoustics — Determination of sound power levels of noise sources using sound
pressure — Engineering method in an essentially free field over a reflecting plane (ISO 3744:1994)" with
"prEN ISO 3744:2006, Acoustics — Determination of sound power levels and sound energy levels of noise
sources using sound pressure — Engineering method for an essentially free field over a reflecting plane
(ISO/DIS 3744:2006)".
Replace "ISO 6104:1979, Abrasive products — Diamond or cubic boron nitride grinding wheels and saws —
General survey, designation and multilingual nomenclature" with "ISO 6104:2005, Superabrasive products —
Rotating grinding tools with diamond or cubic boron nitride — General survey, designation and multilingual
nomenclature".
Replace "ISO 7000:1989" with "ISO 7000:2004".
Add:
"EN 206-1:2000, Concrete — Part 1: Specification, performance, production and conformity",
"EN ISO 5349-2:2001, Mechanical vibration — Measurement and evaluation of human exposure to hand-
transmitted vibration — Part 2: Practical guidance for measurement at the workplace (ISO 5349-2:2001)
EN ISO 8041:2005, Human response to vibration — Measuring instrumentation (ISO 8041:2005)",
"EN ISO 12100-1:2003, Safety of machinery — Basic concepts, general principles for design — Part 1: Basic
terminology, methodology (ISO 12100-1:2003)
EN ISO 12100-2:2003, Safety of machinery — Basic concepts, general principles for design — Part 2:
Technical principles (ISO 12100-2:2003)
EN ISO 13732-1:2006, Ergonomics of the thermal environment — Methods for the assessment of human
responses to contact with surfaces — Part 1: Hot surfaces (ISO 13732-1:2006)
EN ISO 13849-1:2006, Safety of machinery — Safety-related parts of control systems — Part 1: General
principles for design (ISO 13849-1:2006)
EN ISO 20643:2005, Mechanical vibration — Hand-held and hand-guided machinery — Principles for
evaluation of vibration emission (ISO 20643:2005)",
"ISO 5348:1998, Mechanical vibration and shock — Mechanical mounting of accelerometers" and
"ISO 16063-1:1998, Methods for the calibration of vibration and shock transducers — Part 1: Basic concepts".
5 Modification to Clause 3, Terms and definitions
Standard paragraph:
Replace "EN 1070:1998" with "EN ISO 12100-1:2003".
Definition of 3.6:
Replace "ISO 6104:1979" with "ISO 6104:2005".
6 Modification to Table 1 — List of significant hazards
Add as last item:
"4.31 Hazards generated by vibration Annex F"
7 Modification to Clause 5, Safety requirements and/or measures
st
1 hanging paragraph:
Replace "EN 292-1:1991 and EN 292-2:1991" with "EN ISO 12100-1:2003 and EN ISO 12100-2:2003".
nd
2 hanging paragraph:
Replace "EN 953:1997" with "EN 953" and "EN 60204-1:1997" with " EN 60204-1:2006".
8 Modification to 5.1.2.1, Transmission parts
st nd
1 paragraph, 2 sentence:
nd
Replace the 2 sentence with the following:
"These guards shall comply with EN 953 and 5.3.2.2 of EN ISO 12100-2.".
rd
3 paragraph:
rd
Delete the 3 paragraph, listings and NOTE.
9 Modification to 5.1.5, Transport and handling
NOTE:
Replace "1.1.5 of EN 292-1:1991, Annex A" with "5.5.5 of EN 12100-2:2003".
10 Modification to 5.1.8.1, General
First paragraph:
Replace "EN 60204-1:1997" with "EN 60204-1:2006" and "EN 954-1:1996" with "EN ISO 13849-1:2006".
11 Modification to 5.2.1, General
st
1 paragraph:
Replace "EN 61029-1:1995" with "EN 61029-1:2000".
nd
2 paragraph:
Replace "EN 60204-1:1997" with "EN 60204-1:2006".
12 Modification to 5.2.2, Water pump
Replace "EN 60335-1:1994 and EN 60335-2-41:1996" with "EN 60335-1:2002 and EN 60335-2-41:2003".
13 Modification to 5.3, Thermal hazards
5.3.2
Replace "4.2.2 of EN 563:1994" with "4.2 of EN ISO 13732-1:2006".
5.3.3
st
1 paragraph:
Replace "EN 563:1994" with "EN ISO 13732-1:2006".
5.3.4 Test method
nd
2 paragraph:
Replace "EN 563:1994" with "EN ISO 13732-1:2006".
14 Modification to Clause 7, Information for use
In the hanging paragraph, replace "5.5" with "6.5" and "EN 292-2:1991" with "EN ISO 12100-2:2003".
7.1.1 Regular marking
st
Replace the 1 indent with the following indents: "
 the business name and full address of the manufacturer and, where applicable, his authorised
representative;
 designation of machinery;".
Footnote to text 2)
Footnote to text 2) becomes footnote to text 1). Replace text of footnote to text 1) with the following text:
)
" For machines and their related products intended to be put on the market in the EEA, CE-marking as defined in the
applicable European Directive(s), e.g. Machinery.".
7.2.1.1 Description of the machine
th
Add as new 9 indent: "
 information that noise emission values obtained under the measurement conditions described in this
European Standard will not necessarily correspond to the diverse noise levels produced under the
operational conditions of practical use;".
Add as last indents: "
 information on hand-arm vibration shall be given in the instruction handbook, see Annex F;
 information that exposure could be reciprocally proportional to the weight of
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 536:2015(Main)
Road construction machines - Mixing plants for road construction materials - Safety requirements
SIST EN 536:2015

This European Standard specifies the safety requirements applicable to stationary and relocatable mixing plants for the production of materials (e.g. hot-mix asphalt, cold-mix asphalt, cement gravel) used for the construction and maintenance of traffic routes (roads, highways, sidewalks, airfields, etc.) water retaining works, dam walls, culverts, etc.
This European Standard applies to the following types of mixing plant:
a)   hot Asphalt mixing plant;
b)   cold mixing plant (e.g. for production of cement gravel, cold mix asphalt);
c)   mixing plant for bituminous or non-bituminous reclaimed materials;
d)   mixing plant for mastic asphalt, also including natural asphalt.
Machines moving during the working process (e.g. mobile mastic asphalt mixers) and crushers are not covered by this European Standard.
Those types of asphalt mixing plants can also be combined or enlarged by additional installations (e.g. Plant for storage of binders (e.g. bituminous, synthetic, vegetal).
This European Standard deals with all significant hazards pertinent to mixing plants, when they are used as intended and under the conditions of misuse which are reasonably foreseen by the manufacturer (see Clause 4). This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards.
This European Standard does not apply to machines for the production of cement concrete and mortar as covered in EN 12151.
This European Standard does not deal with hazards caused by flammable gases. As soon as information is available it will be included.
This European Standard is not applicable to mixing plants for road construction materials, which are manufactured before the date of publication of this European Standard by CEN.

  • Standard
    60 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13020:2004/FprA1(Amendment)
Road surface treatment machines - Safety requirements
SIST EN 13020:2005/kFprA1:2009
  • Draft
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 536:2015(Main)
Road construction machines - Mixing plants for road construction materials - Safety requirements
SIST EN 536:2015

This European Standard specifies the safety requirements applicable to stationary and relocatable mixing plants for the production of materials (e.g. hot-mix asphalt, cold-mix asphalt, cement gravel) used for the construction and maintenance of traffic routes (roads, highways, sidewalks, airfields, etc.) water retaining works, dam walls, culverts, etc.
This European Standard applies to the following types of mixing plant:
a)   hot Asphalt mixing plant;
b)   cold mixing plant (e.g. for production of cement gravel, cold mix asphalt);
c)   mixing plant for bituminous or non-bituminous reclaimed materials;
d)   mixing plant for mastic asphalt, also including natural asphalt.
Machines moving during the working process (e.g. mobile mastic asphalt mixers) and crushers are not covered by this European Standard.
Those types of asphalt mixing plants can also be combined or enlarged by additional installations (e.g. Plant for storage of binders (e.g. bituminous, synthetic, vegetal).
This European Standard deals with all significant hazards pertinent to mixing plants, when they are used as intended and under the conditions of misuse which are reasonably foreseen by the manufacturer (see Clause 4). This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards.
This European Standard does not apply to machines for the production of cement concrete and mortar as covered in EN 12151.
This European Standard does not deal with hazards caused by flammable gases. As soon as information is available it will be included.
This European Standard is not applicable to mixing plants for road construction materials, which are manufactured before the date of publication of this European Standard by CEN.

  • Standard
    60 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13020:2004/FprA1(Amendment)
Road surface treatment machines - Safety requirements
SIST EN 13020:2005/kFprA1:2009
  • Draft
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17339:2024(Main)
Transportable gas cylinders – Hoop wrapped and fully wrapped carbon composite cylinders and tubes for hydrogen
kSIST FprEN 17339:2024

This document specifies minimum requirements for the materials, design, construction, prototype testing and routine manufacturing inspections of composite gas cylinders and tubes for compressed hydrogen.
NOTE 1 Unless specified in the text, for the purposes of this document, the word “cylinder” includes tubes.
This document applies to
-   fully wrapped composite cylinders (Type 3 and Type 4)
-   hoop wrapped cylinders (Type 2)
with carbon fibres intended to be permanently mounted in a frame (e.g. bundle or trailer) with a test pressure of not less than 300 bar, with:
— non-metallic liners (for Type 4) or seamless metallic liners (for Type 2 and Type 3),
— a maximum water capacity of 3 000 l
— a maximum working pressure of 1 000 bar.
— the product of working pressure times water capacity (p x V) not exceeding 1 000 000 bar.l.
NOTE 2 A glass fibre protective layer is sometimes applied to the external surface of the cylinder

  • Draft
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN ISO/TS 7552-2:2024(Main)
Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for circulating tumour cells (CTCs) in venous whole blood - Part 2: Isolated DNA (ISO/TS 7552-2:2024)
kSIST-TS FprCEN ISO/TS 7552-2:2024

This document specifies requirements and gives recommendations on the handling, storage, CTC enrichment and isolation, DNA isolation and storage, and documentation of venous whole blood specimens intended for the examination of DNA isolated from circulating tumour cells (CTCs) during the pre-examination phase before a molecular examination is performed.
This document is applicable to molecular in vitro diagnostic examinations including laboratory developed tests performed by medical laboratories. It is also intended to be used by laboratory customers, in vitro diagnostics developers and manufacturers, biobanks, institutions, and commercial organizations performing biomedical research, and regulatory authorities.
This document does not cover the isolation of genomic DNA directly from venous whole blood containing CTCs. This is covered in ISO 20186-2.
This document does not cover the isolation of specific white blood cells and subsequent isolation of genomic DNA therefrom or the pre-analytical workflow requirements for viable CTC cryopreservation and culturing.
NOTE 1        The requirements given in this document can also be applied to other circulating rare cells (e.g. foetal cells).
NOTE 2        International, national, or regional regulations or requirements can also apply to specific topics covered in this document.

  • Draft
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12520:2024(Main)
Furniture - Safety, strength and durability - Requirements for domestic seating
kSIST FprEN 12520:2024

This document specifies the minimum requirements for the safety, strength and durability of all types of domestic seating for adults. It also specifies additional test methods for seat side-to-side durability as well as finger entrapment and shear and compression.
It does not apply to ranked seating, seating for non-domestic use, office work chairs, chairs for educational institutions, outdoor seating and to links for linked seating for which European Standards exist.
It does not include requirements for the durability of upholstery materials, castors, reclining and tilting mechanisms and seat height adjustment mechanisms.
It does not include requirements for electrical safety.
It does not include requirements for the resistance to ageing, degradation, flammability and ergonomics.
The requirements are based on use by persons weighing up to 110 kg.
Annex A (normative) specifies the seat side-to-side durability test in D-G points.
Annex B (informative) gives rationales for some of the tests referred to in Table 1.
Annex C (normative) specifies the test methods for finger entrapment and shear and compression.
Annex D (normative) specifies the seat loading point for seating with suspended flexible material.

  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN ISO/TS 7552-3:2024(Main)
Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for circulating tumour cells (CTCs) in venous whole blood - Part 3: Preparations for analytical CTC staining (ISO/TS 7552-3:2024)
KSIST-TS FprCEN ISO/TS 7552-3:2024

This document specifies requirements and gives recommendations on the handling, storage, CTC enrichment, preparation for CTC staining, and documentation of venous whole blood specimens intended for staining of CTCs during the pre-examination phase before an examination is performed.
This document is applicable to molecular in vitro diagnostic examinations including laboratory developed tests performed by medical laboratories. It is also intended to be used by laboratory customers, in vitro diagnostics developers, and manufacturers, biobanks, institutions, and commercial organizations performing biomedical research, and regulatory authorities.
This document does not cover pre-analytical workflow requirements for viable CTC cryopreservation and culturing.
Different dedicated measures are taken for stabilizing CTCs genomic DNA and RNA that are not described in this document; they are covered in ISO 7552-1 and ISO 7552-2.
NOTE 1        The requirements given in this document can also be applied to other circulating rare cells (e.g. foetal cells).
NOTE 2        International, national or regional regulations or requirements can also apply to specific topics covered in this document.

  • Draft
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 81-31:2024(Main)
Safety rules for the construction and installation of lifts - Lifts for the transport of goods only - Part 31: Accessible goods only lifts
oSIST prEN 81-31:2022

1.1   This document specifies the safety rules for new accessible goods only lifts with traction, positive or hydraulic drive, permanently installed and only used by users (see 3.57), serving fixed and permanent landing levels, having a carrier made of a single load carrying area, designed for the transportation of goods only, moving along a fixed path by rigid guide rails and inclined not more than 15° to the vertical, with rated speed not exceeding 1 m/s.
This document covers accessible goods only lifts with rated load exceeding 300 kg and not intended to transport persons.
1.2   For the purpose of this document, a goods only lift carrier is regarded as accessible where one of the following conditions is satisfied:
a)   floor area of the carrier is greater than 1,0 m2;
b)   depth of the carrier is greater than 1,0 m;
c)   clear height of the carrier is greater than 1,20 m.
In case the carrier is without a roof, it is considered accessible when the clear height of the landing doors is greater than 1,20 m.
1.3   Two types of accessible goods only lifts are addressed:
a)   Type A, where the intended use is bound to the maximum rated speed of 0,30 m/s;
b)   Type B, where the intended use is bound to the maximum rated speed of 1,0 m/s.
1.4   In addition to the requirements of this document, supplementary requirements are to be considered in special cases (operation subject to ATEX rules, operational in ambiental condition not addressed by this standard, seismic conditions, transporting dangerous goods, etc.).
1.5   This document does not cover:
a)   accessible goods only lifts:
1)   with more than one lift machine;
i)   where loading and unloading is automated, or the carrier floor is fitted with mobile devices (e.g. rollers) for loading and unloading purposes;
ii)   intended to carry bulk loads (such as loose sand, gravel, etc.);
iii)   with drive systems other than those stated in 4.8;
b)   lifting tables according to EN 1570-1 and EN 1570-2;
c)   lifting appliances, such as appliances with more than one carrier, skips, goods only lifts for construction sites, for underground applications, mine winding gear, goods only lifts on seagoing vessels and mobile offshore units, construction and maintenance appliances in wind turbines, goods only lifts specially designed and constructed for research purposes for temporary use in laboratories, goods only lifts specially designed and constructed for military or police purposes;
d)   safety during operation of transport, erection, repairs and dismantling of accessible goods only lifts;
e)   the use of translucent material for the walls of the well and machinery spaces, for the carrier with the exception of the landing doors vision panels;
f)   the use of programmable electronic systems in safety related applications for lifts (PESSRAL);
g)   hydraulic lifts where the setting of the pressure relief valve exceeds 50 MPa;
h)   any form of radiation except EMC;
i)   fire propagation;
j)   energy dissipation type buffers;
k)   the possibility of two simultaneous acts of imprudence and/or the abuse of instructions for use.
l)   ambient temperature in the well and machinery spaces lower than +5 °C and higher than +40 °C;
m)   health and safety of animals.
However, this document can usefully be taken as a basis.
Noise and vibrations are not dealt with in this document as they are not considered a significant nor relevant hazard for the actual type of the accessible goods only lifts.
1.6   The requirements of this document are such that the possibility of a failure of an electric safety device or a safety component complying with all the requirements of this document needs not to be taken into consideration.
1.7   This document is not applicable to accessible goods only lifts which were manufactured before the date of its publication as EN.

  • Draft
    189 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1426:2024(Main)
Bitumens and bituminous binders - Determination of needle penetration
kSIST FprEN 1426:2024

This document specifies a method for the determination of the needle penetration of bitumens and bituminous binders.
The standard procedure for the determination of the needle penetration (consistency) is described for penetrations up to (330 × 0,1) mm at a temperature of 25 °C. The method also allows for penetrations up to (500 × 0,1) mm using a longer needle.
WARNING - The use of this document can involve hazardous materials, operations and equipment. This document does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this document to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.

  • Draft
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day