Glass in building - Basic soda lime silicate glass products - Part 7: Wired or unwired channel shaped glass

This European Standard specifies dimensional and minimum quality requirements (in respect of visual and wire faults) for channel shaped glass, as defined in EN 572-1:2012, for use in building.
This European Standard covers channel shaped glass supplied in stock sizes and final cut sizes.

Glas im Bauwesen - Basiserzeugnisse aus Kalk-Natronsilicatglas - Teil 7: Profilbauglas mit oder ohne Drahteinlage

Diese Europäische Norm legt die Anforderungen an Maße und Mindestqualität (in Bezug auf optische Fehler und Fehler im Drahtnetz) für Profilbauglas für das Bauwesen, wie es in EN 572 1:2012 definiert ist, fest.
Diese Europäische Norm ist für Profilbauglas, das in Standardabmessungen und Festmaßen geliefert wird, anwendbar.

Verre dans la construction - Produits de base: verre de silicate sodo-calcique - Partie 7: Verre profilé armé ou non armé

La présente Norme européenne détermine les spécifications dimensionnelles et les spécifications qualitatives minimales (concernant les défauts d'aspect et les défauts du fil métallique) du verre profilé, tel que défini dans le EN 572-1:2012, pour l'utilisation dans la construction.
La présente Norme européenne s'applique au verre profilé fourni en dimensions standard et en mesures découpées finales.

Steklo v gradbeništvu - Osnovni izdelki iz natrij-kalcijevega silikatnega stekla - 7. del: Žično in brezžično utorjeno steklo

Ta evropski standard določa zahteve glede mer in minimalne kakovosti (v zvezi z vizualnimi in žičnimi napakami) za utorjeno steklo, kot je določeno v standardu FprEN 572-1:2011, za uporabo v gradbeništvu. Ta evropski standard zajema utorjeno steklo, dobavljeno v velikostih na zalogi in končnih velikostih razreza.

General Information

Status
Published
Publication Date
17-Jul-2012
Current Stage
9060 - Closure of 2 Year Review Enquiry - Review Enquiry
Due Date
04-Mar-2018
Completion Date
04-Mar-2018

RELATIONS

Buy Standard

Standard
EN 572-7:2012
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day
Draft
FprEN 572-7:2012
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Glas im Bauwesen - Basiserzeugnisse aus Kalk-Natronsilicatglas - Teil 7: Profilbauglas mit oder ohne DrahteinlageVerre dans la construction - Produits de base: verre de silicate sodo-calcique - Partie 7: Verre profilé armé ou non arméGlass in building - Basic soda lime silicate glass products - Part 7: Wired or unwired channel shaped glass81.040.20Steklo v gradbeništvuGlass in buildingICS:Ta slovenski standard je istoveten z:EN 572-7:2012SIST EN 572-7:2012en,fr,de01-oktober-2012SIST EN 572-7:2012SLOVENSKI

STANDARDSIST EN 572-7:20041DGRPHãþD
SIST EN 572-7:2012
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 572-7
July 2012 ICS 81.040.20 Supersedes EN 572-7:2004English Version

Glass in building - Basic soda lime silicate glass products - Part 7: Wired or unwired channel shaped glass

Verre dans la construction - Produits de base: verre de silicate sodo-calcique - Partie 7: Verre profilé armé ou non armé

Glas im Bauwesen - Basiserzeugnisse aus Kalk-Natronsilicatglas - Teil 7: Profilbauglas mit oder ohne Drahteinlage This European Standard was approved by CEN on 11 May 2012.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,

B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 572-7:2012: ESIST EN 572-7:2012

EN 572-7:2012 (E) 2 Contents Page Foreword ..............................................................................................................................................................31 Scope ......................................................................................................................................................42 Normative references ............................................................................................................................43 Terms and definitions ...........................................................................................................................44 Dimensional requirements ....................................................................................................................64.1 Method of measurement .......................................................................................................................64.1.1 Width, B, and height of flange, d ..........................................................................................................64.1.2 Length, H ................................................................................................................................................64.1.3 Thickness, c ............................................................................................................................................64.1.4 Flange deviation.....................................................................................................................................64.1.5 Squareness of cut ..................................................................................................................................74.1.6 Wire inlay ................................................................................................................................................74.2 Tolerances ..............................................................................................................................................74.2.1 Width, B, height of flange, d, and thickness c .....................................................................................74.2.2 Length .....................................................................................................................................................74.2.3 Flange deviation.....................................................................................................................................74.2.4 Squareness of cut ..................................................................................................................................74.2.5 Wire inlay ................................................................................................................................................75 Quality requirements .............................................................................................................................85.1 General ....................................................................................................................................................85.2 Methods of observation and measurement ........................................................................................85.2.1 Visual faults ............................................................................................................................................85.2.2 Wire faults ...............................................................................................................................................85.3 Acceptance levels ..................................................................................................................................95.3.1 Visual faults ............................................................................................................................................95.3.2 Wire faults ...............................................................................................................................................96 Designation ............................................................................................................................................9Bibliography ..................................................................................................................................................... 10 SIST EN 572-7:2012

EN 572-7:2012 (E) 3 Foreword This document (EN 572-7:2012) has been prepared by Technical Committee CEN/TC 129 “Glass in building”, the secretariat of which is held by NBN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2013, and conflicting national standards shall be withdrawn at the latest by January 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 572-7:2004. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. This edition is a revision of EN 572-7:2004. The main change in this edition is a new method of determination of squareness. This European Standard “Glass in building — Basic soda lime silicate glass products” consists of the following parts:  Part 1: Definitions and general physical and mechanical properties;  Part 2: Float glass;  Part 3: Polished wired glass;  Part 4: Drawn sheet glass;  Pa

...

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Glas im Bauwesen - Basiserzeugnisse aus Kalk-Natronsilicatglas - Teil 7: Profilbauglas mit oder ohne DrahteinlageVerre dans la construction - Produits de base: verre de silicate sodo-calcique - Partie 7: Verre profilé armé ou non arméGlass in building - Basic soda lime silicate glass products - Part 7: Wired or unwired channel shaped glass81.040.20Steklo v gradbeništvuGlass in buildingICS:Ta slovenski standard je istoveten z:FprEN 572-7kSIST FprEN 572-7:2012en,fr,de01-januar-2012kSIST FprEN 572-7:2012SLOVENSKI

STANDARD
kSIST FprEN 572-7:2012
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
FINAL DRAFT
FprEN 572-7
November 2011 ICS 81.040.20 Will supersede EN 572-7:2004English Version

Glass in building - Basic soda lime silicate glass products - Part 7: Wired or unwired channel shaped glass

Verre dans la construction - Produits de base: verre de silicate sodo-calcique - Partie 7: Verre profilé armé ou non armé

Glas im Bauwesen - Basiserzeugnisse aus Kalk-Natronsilicatglas - Teil 7: Profilbauglas mit oder ohne Drahteinlage This draft European Standard is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee CEN/TC 129.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,

B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. FprEN 572-7:2011: EkSIST FprEN 572-7:2012

FprEN 572-7:2011 (E) 2 Contents Page Foreword ..............................................................................................................................................................31 Scope ......................................................................................................................................................42 Normative references ............................................................................................................................43 Terms and definitions ...........................................................................................................................44 Dimensional requirements ....................................................................................................................64.1 Method of measurement .......................................................................................................................64.1.1 Width, B, and height of flange, d ..........................................................................................................64.1.2 Length, H ................................................................................................................................................64.1.3 Thickness, c ............................................................................................................................................64.1.4 Flange deviation.....................................................................................................................................64.1.5 Squareness of cut ..................................................................................................................................74.1.6 Wire inlay ................................................................................................................................................74.2 Tolerances ..............................................................................................................................................74.2.1 Width, B, height of flange, d, and thickness c .....................................................................................74.2.2 Length .....................................................................................................................................................74.2.3 Flange deviation.....................................................................................................................................74.2.4 Squareness of cut ..................................................................................................................................74.2.5 Wire inlay ................................................................................................................................................75 Quality requirements .............................................................................................................................85.1 General ....................................................................................................................................................85.2 Methods of observation and measurement ........................................................................................85.2.1 Visual faults ............................................................................................................................................85.2.2 Wire faults ...............................................................................................................................................85.3 Acceptance levels ..................................................................................................................................95.3.1 Visual faults ............................................................................................................................................95.3.2 Wire faults ...............................................................................................................................................96 Designation ............................................................................................................................................9Bibliography ..................................................................................................................................................... 10 kSIST FprEN 572-7:2012

FprEN 572-7:2011 (E) 3 Foreword This document (FprEN 572-7:2011) has been prepared by Technical Committee CEN/TC 129 “Glass in building”, the secretariat of which is held by NBN. This document is currently submitted to the Unique Acceptance Procedure. This document will supersede EN 572-7:2004. This document has been prepared under a mandate given to CEN by the European Commission and the European Free

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.