EN 10217-4:2002

Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Electric welded non-alloy steel tubes with specified low temperature properties

This Part of EN 10217 specifies the technical delivery conditions in two test categories of electric welded tubes of circular cross section, with specified low temperature properties, made of non-alloy steel.

Geschweißte Stahlrohre für Druckbeanspruchungen - Technische Lieferbedingungen - Teil 4: Elektrisch geschweißte Rohre aus unlegierten Stählen mit festgelegten Eigenschaften bei tiefen Temperaturen

Dieser Teil der EN 10217 enthält die technischen Lieferbedingungen für elektrisch geschweißte Rohre mit kreisförmigem Querschnitt aus unlegiertem Stahl mit festgelegten Eigenschaften bei tiefen Temperaturen und legt dafür zwei Prüfkategorien fest.

Tubes soudés en acier pour service sous pression - Conditions techniques de livraison - Partie 4: Tubes soudés électriquement en acier non allié avec caractéristiques spécifiées à basse température

La présente partie de l'EN 10217 spécifie les conditions techniques de livraison de deux catégories d'essai des tubes soudés électriquement à section circulaire, avec carcatéristiques spécifiées à basse température, fabriqués en aciers non alliés..

Varjene jeklene cevi za tlačne posode - Tehnični dobavni pogoji - 4. del: Električno varjene nelegirane jeklene cevi s specificiranimi lastnostmi za delo pri nizkih temperaturah

General Information

• Status: Withdrawn
• Publication Date: 21-May-2002
• Withdrawal Date: 16-Apr-2019
• ICS: 23.040.10 - Iron and steel pipes
• ICS: 77.140.75 - Steel pipes and tubes for specific use
• Technical Committee: ECISS/TC 110 - Steel tubes, and iron and steel fittings
• Drafting Committee: ECISS/TC 29/SC 1 - Tubes for pressure purposes
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 17-Apr-2019
• Directive: 2014/68/EU - Directive 2014/68/EU of the European Parliament and of the Council of 15 May 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of pressure equipment
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: SIST EN 10217-4:2003 - Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Electric welded non-alloy steel tubes with specified low temperature properties

Relations

• Replaced By: EN 10217-4:2019 - Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Electric welded non-alloy steel tubes with specified low temperature properties
• Effective Date: 15-Apr-2009
• Amended By: EN 10217-4:2002/A1:2005 - Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Electric welded non-alloy steel tubes with specified low temperature properties
• Effective Date: 08-Jun-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.WHPSHUDWXUDKGeschweißte Stahlrohre für Druckbeanspruchungen - Technische Lieferbedingungen - Teil 4: Elektrisch geschweißte Rohre aus unlegierten Stählen mit festgelegten Eigenschaften bei tiefen TemperaturenTubes soudés en acier pour service sous pression - Conditions techniques de livraison - Partie 4: Tubes soudés électriquement en acier non allié avec caractéristiques spécifiées a basse températureWelded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Electric welded non-alloy steel tubes with specified low temperature properties77.140.75Jeklene cevi in cevni profili za posebne nameneSteel pipes and tubes for specific use23.020.30MHNOHQNHPressure vessels, gas cylindersICS:Ta slovenski standard je istoveten z:EN 10217-4:2002SIST EN 10217-4:2003en01-april-2003SIST EN 10217-4:2003SLOVENSKI
STANDARD



SIST EN 10217-4:2003



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 10217-4May 2002ICS 23.040.10; 77.140.75English versionWelded steel tubes for pressure purposes - Technical deliveryconditions - Part 4: Electric welded non-alloy steel tubes withspecified low temperature propertiesTubes soudés en acier pour service sous pression -Conditions techniques de livraison - Partie 4: Tubes soudésélectriquement en acier non allié avec caractéristiquesspécifiées à basse températureGeschweißte Stahlrohre für Druckbeanspruchungen -Technische Lieferbedingungen - Teil 4: Elektrischgeschweißte Rohre aus unlegierten Stählen mitfestgelegten Eigenschaften bei tiefen TemperaturenThis European Standard was approved by CEN on 25 April 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 10217-4:2002 ESIST EN 10217-4:2003



EN 10217-4:2002 (E)2ContentsForeword.31SCOPE.42NORMATIVE REFERENCES.43Definitions.54Symbols.55CLASSIFICATION AND DESIGNATION.65.1Classification.65.2Designation.66Information to be supplied by the purchaser.66.1Mandatory information.66.2Options.66.3Example of an order.77Manufacturing process.77.1Steelmaking process.
...