Adhesives - Test methods for adhesives for floor coverings and wall coverings - Determination of dimensional changes of a linoleum floor covering in contact with an adhesive (ISO 22633:2019)

This European standard specifies a test method to measure the dimensional changes of a linoleum floorcovering whilst being adhered to a glass substrate. This method is to be used in conjunction with other test methods and not used solely to determine the suitability of a particular adhesive/linoleum combination.

Klebstoffe - Prüfverfahren für Klebstoffe für Boden- und Wandbeläge - Bestimmung der Maßänderung eines Linoleumbodenbelages im Kontakt mit einem Klebstoff (ISO 22633:2019)

Dieses Dokument legt ein Prüfverfahren zur Messung der Maßänderungen von Linoleum¬bodenbelägen fest, die auf ein Glassubstrat geklebt sind. Dieses Prüfverfahren ist in Verbindung mit anderen Prüfver¬fahren anzuwenden und darf nicht alleine zur Bestimmung der Eignung einer speziellen Klebstoff-/Linoleum-Kombination verwendet werden.

Adhésifs - Méthodes d'essais pour adhésifs pour revêtements de sols et revêtements muraux - Détermination des variations dimensionnelles d'un revêtement en linoléum en contact avec un adhésif (ISO 22633:2019)

Le présent document spécifie une méthode d'essai pour mesurer les variations dimensionnelles d'un revêtement de sol en linoléum lorsqu'il est collé sur un support en verre. Cette méthode est destinée à être utilisée conjointement avec d'autres méthodes d'essai et non seule, pour évaluer l'adéquation d'une combinaison adhésif/linoléum particulière.

Lepila - Preskusne metode za lepila za talne in stenske obloge - Ugotavljanje sprememb mer talnih oblog iz linoleja ob stiku z lepilom (ISO 22633:2019)

Ta evropski standard določa preskusno metodo za merjenje dimenzijskih sprememb talnih oblog iz linoleja, prilepljenih na stekleno podlago. Ta metoda se uporablja skupaj z drugimi preskusnimi metodami in se ne uporablja samo za določitev ustreznosti določene kombinacije lepila/linoleja.

General Information

Status
Published
Public Enquiry End Date
31-Jul-2018
Publication Date
22-Sep-2019
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
19-Sep-2019
Due Date
24-Nov-2019
Completion Date
23-Sep-2019

Relations

Buy Standard

Standard
EN ISO 22633:2019
English language
15 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 22633:2019
01-november-2019
Nadomešča:
SIST EN 1841:2000
Lepila - Preskusne metode za lepila za talne in stenske obloge - Ugotavljanje
sprememb mer talnih oblog iz linoleja ob stiku z lepilom (ISO 22633:2019)
Adhesives - Test methods for adhesives for floor coverings and wall coverings -
Determination of dimensional changes of a linoleum floor covering in contact with an
adhesive (ISO 22633:2019)
Klebstoffe - Prüfverfahren für Klebstoffe für Boden- und Wandbeläge - Bestimmung der
Maßänderung eines Linoleumbodenbelages im Kontakt mit einem Klebstoff (ISO
22633:2019)
Adhésifs - Méthodes d'essais pour adhésifs pour revêtements de sols et revêtements
muraux - Détermination des variations dimensionnelles d'un revêtement en linoléum en
contact avec un adhésif (ISO 22633:2019)
Ta slovenski standard je istoveten z: EN ISO 22633:2019
ICS:
83.180 Lepila Adhesives
97.150 Talne obloge Floor coverings
SIST EN ISO 22633:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 22633:2019

---------------------- Page: 2 ----------------------
SIST EN ISO 22633:2019


EN ISO 22633
EUROPEAN STANDARD

NORME EUROPÉENNE

September 2019
EUROPÄISCHE NORM
ICS 83.180 Supersedes EN 1841:1998
English Version

Adhesives - Test methods for adhesives for floor coverings
and wall coverings - Determination of dimensional
changes of a linoleum floor covering in contact with an
adhesive (ISO 22633:2019)
Adhésifs - Méthodes d'essais pour adhésifs pour Klebstoffe - Prüfverfahren für Klebstoffe für Boden-
revêtements de sols et revêtements muraux - und Wandbeläge - Bestimmung der Maßänderung
Détermination des variations dimensionnelles d'un eines Linoleumbodenbelages im Kontakt mit einem
revêtement en linoléum en contact avec un adhésif Klebstoff (ISO 22633:2019)
(ISO 22633:2019)
This European Standard was approved by CEN on 8 September 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 22633:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 22633:2019
EN ISO 22633:2019 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 22633:2019
EN ISO 22633:2019 (E)
European foreword
This document (EN ISO 22633:2019) has been prepared by Technical Committee ISO/TC 61 "Plastics"
in collaboration with Technical Committee CEN/TC 193 “Adhesives” the secretariat of which is held by
UNE.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2020, and conflicting national standards shall
be withdrawn at the latest by March 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 1841:1998.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 22633:2019 has been approved by CEN as EN ISO 22633:2019 without any modification.

3

---------------------- Page: 5 ----------------------
SIST EN ISO 22633:2019

---------------------- Page: 6 ----------------------
SIST EN ISO 22633:2019
INTERNATIONAL ISO
STANDARD 22633
First edition
2019-07
Adhesives — Test methods for
adhesives for floor coverings and wall
coverings — Determination of the
dimensional changes of a linoleum
floor covering in contact with an
adhesive
Adhésifs — Méthodes d'essais pour adhésifs pour revêtements de sols et
revêtements muraux — Détermination des variations dimensionnelles
d'un revêtement en linoléum en contact avec un adhésif
Reference number
ISO 22633:2019(E)
©
ISO 2019

---------------------- Page: 7 ----------------------
SIST EN ISO 22633:2019
ISO 22633:2019(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved

---------------------- Page: 8 ----------------------
SIST EN ISO 22633:2019
ISO 22633:2019(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 2
5 Apparatus and materials. 2
6 Preparation of test specimens . 3
6.1 General . 3
6.2 Conditioning . 4
6.3 Datum points . 4
6.4 Reference dimension — Measurement A . 5
7 Test procedure . 5
7.1 Application of the adhesive . 5
7.2 Bonding . 5
7.3 Measurements . 5
8 Evaluation and expression of results . 5
9 Test report . 6
Bibliography . 7
© ISO 2019 – All rights reserved iii

---------------------- Page: 9 ----------------------
SIST EN ISO 22633:2019
ISO 22633:2019(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and thos
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.