EN ISO 12863:2022
(Main)Standard test method for assessing the ignition propensity of cigarettes (ISO 12863:2022)
Standard test method for assessing the ignition propensity of cigarettes (ISO 12863:2022)
This document specifies a test method for testing the capability of a cigarette, positioned on one of three standard substrates, to extinguish or to generate sufficient heat to continue burning, and thus potentially cause ignition of bedding or upholstered furniture. This document is only applicable to factory-made cigarettes that burn along the length of a tobacco column.
This is a performance-based document; it does not prescribe any design features of the cigarette that can lead to improved or degraded performance in the test method. The output of this method has been correlated with the potential for cigarettes to ignite upholstered furniture.
Normprüfverfahren zur Beurteilung der Zündneigung von Zigaretten (ISO 12863:2022)
Dieses Dokument legt ein Prüfverfahren für die Prüfung der Fähigkeit einer Zigarette fest, auf einem von drei Substraten entweder zu verlöschen oder ausreichend Wärme zu entwickeln, um weiter zu brennen und dadurch möglicherweise die Entzündung von Bettwäsche oder gepolsterten Möbeln hervor¬zurufen. Dieses Dokument gilt nur für industriell hergestellte Zigaretten, die entlang der Länge eines Tabak¬strangs abbrennen.
Es handelt sich um ein leistungsbezogenes Dokument, das keine Gestaltungsmerkmale der Zigarette vorschreibt, die zu einer Verbesserung oder Verschlechterung der Testergebnisse im Prüfverfahren führen können. Das Ergebnis dieses Verfahrens ist mit der Neigung von Zigaretten, Polstermöbel zu entzünden, korreliert worden.
WARNUNG — Dieses Dokument ist mit dem Umgang mit brennbaren Werkstoffen verbunden, die einer Zündquelle ausgesetzt werden. Die brennenden Werkstoffe emittieren giftige Verbrennungs-produkte. Der Anwender muss geeignete Sicherheitsmaßnahmen treffen, um Verbrennungen und das Einatmen von Verbrennungsprodukten zu verhindern. Der Anwender muss sicherstellen, dass alle Flammen erloschen sind, bevor die Prüfmaterialien geeignet entsorgt werden.
Méthode d'essai normalisée pour évaluer le potentiel incendiaire des cigarettes (ISO 12863:2022)
Le présent document spécifie une méthode d’essai pour évaluer la capacité d’une cigarette, positionnée sur un des trois substrats normalisés, à s’éteindre ou à générer suffisamment de chaleur pour continuer à se consumer et, par conséquent, à potentiellement mettre le feu à la literie ou aux meubles rembourrés. Le présent document s’applique aux cigarettes manufacturées se consumant sur la longueur d’une colonne de tabac.
Il s’agit d’un document fondé sur les performances; il ne décrit pas les caractéristiques de conception de la cigarette susceptibles d’aboutir à des performances supérieures ou inférieures selon la méthode d’essai. Le résultat de cette méthode a été corrélé avec le potentiel des cigarettes à incendier les meubles rembourrés.
Standardna preskusna metoda za ocenjevanje nagnjenosti k vžigu cigaret (ISO 12863:2022)
Ta dokument določa preskusno metodo za preskušanje sposobnosti cigarete, nameščene na eno od treh standardnih podlag, da ugasne ali proizvede dovolj toplote za nadaljevanje gorenja in tako lahko povzroči vžig posteljnine ali oblazinjenega pohištva. Ta dokument se uporablja samo za tovarniško izdelane cigarete, ki gorijo po dolžini tobačnega stolpca. To je dokument, ki temelji na učinkovitosti; ne predpisuje nobenih oblikovnih značilnosti cigarete, ki bi lahko vodile do izboljšanja ali poslabšanja učinkovitosti v preskusni metodi. Rezultat te metode je povezan z možnostjo, da cigarete vžgejo oblazinjeno pohištvo.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-junij-2022
Nadomešča:
SIST EN ISO 12863:2010
SIST EN ISO 12863:2010/A1:2016
SIST EN ISO 12863:2010/AC:2014
Standardna preskusna metoda za ocenjevanje nagnjenosti k vžigu cigaret (ISO
12863:2022)
Standard test method for assessing the ignition propensity of cigarettes (ISO
12863:2022)
Normprüfverfahren zur Beurteilung der Zündneigung von Zigaretten (ISO 12863:2022)
Méthode d'essai normalisée pour évaluer le potentiel incendiaire des cigarettes (ISO
12863:2022)
Ta slovenski standard je istoveten z: EN ISO 12863:2022
ICS:
13.220.40 Sposobnost vžiga in Ignitability and burning
obnašanje materialov in behaviour of materials and
proizvodov pri gorenju products
65.160 Tobak, tobačni izdelki in Tobacco, tobacco products
oprema and related equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 12863
EUROPEAN STANDARD
NORME EUROPÉENNE
April 2022
EUROPÄISCHE NORM
ICS 13.220.40; 65.160 Supersedes EN ISO 12863:2010, EN ISO
12863:2010/AC:2011, EN ISO 12863:2010/A1:2016
English Version
Standard test method for assessing the ignition propensity
of cigarettes (ISO 12863:2022)
Méthode d'essai normalisée pour évaluer le potentiel Normprüfverfahren zur Beurteilung der Zündneigung
incendiaire des cigarettes (ISO 12863:2022) von Zigaretten (ISO 12863:2022)
This European Standard was approved by CEN on 28 March 2022.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 12863:2022 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 12863:2022) has been prepared by Technical Committee ISO/TC 92 "Fire
safety" in collaboration with Technical Committee CEN/TC 401 “Reduced Ignition Propensity
Cigarettes” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by October 2022, and conflicting national standards shall
be withdrawn at the latest by October 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 12863:2010.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 12863:2022 has been approved by CEN as EN ISO 12863:2022 without any modification.
INTERNATIONAL ISO
STANDARD 12863
Second edition
2022-04
Standard test method for assessing
the ignition propensity of cigarettes
Méthode d'essai normalisée pour évaluer le potentiel incendiaire des
cigarettes
Reference number
ISO 12863:2022(E)
ISO 12863:2022(E)
© ISO 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO 12863:2022(E)
Contents Page
Foreword .v
Introduction . vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 General principle .2
5 Apparatus . 2
5.1 General . 2
5.2 Test and conditioning environment . 2
5.2.1 General . 2
5.2.2 Conditioning room . 3
5.2.3 Conditioning box . 3
5.3 Test chamber . 3
5.4 Substrate holder . 3
5.5 Metal rim . 3
5.6 Cigarette holder . 4
5.7 Cigarette ignition system . 4
5.8 Exhaust hood . . 4
6 Verification of test equipment . 4
6.1 Frequency of verification . 4
6.2 Examination for chamber leakage . 4
6.3 Stability of chamber atmosphere . 4
6.4 Humidity and temperature sensors . 5
6.5 Test performance verification . 5
7 Test specimens and standard substrate assemblies . 5
7.1 Handling . 5
7.2 Cigarettes . 5
7.2.1 Cigarette sampling . 5
7.2.2 Care in handling and storage . 5
7.2.3 Markings . 6
7.3 Filter paper . 6
7.3.1 General description . . 6
7.3.2 Paper mass requirements . 6
7.3.3 Paper orientation . 6
8 Conditioning . 6
8.1 Cigarettes . 6
8.2 Filter paper . 7
9 Test procedure .7
10 Test record . 9
11 Test report . 9
Annex A (normative) Technical drawings of test apparatus .10
Annex B (informative) Estimation of placement of additional pins .14
Annex C (normative) Procedure for selection of substrate assemblies for testing .16
Annex D (informative) Repeatability and reproducibility .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.