EN 1071-1:2003

Advanced technical ceramics - Methods of test for ceramic coatings - Part 1: Determination of coating thickness by contact probe filometer

This part of this European Standard specifies a method for the determination of the thickness of ceramic coatings by measurement of the step height using a contact probe profilometer.
NOTE   An alternative measurement of thickness, using a crater grinding method, is specified in ENV 1071 2.

Hochleistungskeramik - Verfahren zur Prüfung keramischer Schichten - Teil 1: Bestimmung der Schichtdicke mit einem Kontaktprofilometer

Céramiques techniques avancées - Méthodes d'essai pour revêtements céramiques - Partie 1: Détermination de l'épaisseur du revêtement par profilomètre à contact

La présente partie de cette Norme européenne spécifie une méthode permettant de déterminer l'épaisseur de revêtements céramiques par mesurage de la hauteur de décrochement à l'aide d'un profilomètre à contact.
NOTE   Une autre méthode de mesure de l'épaisseur, la méthode d'abrasion de la calotte sphérique, est spécifiée dans l'ENV 1071-2.

Advanced technical ceramics - Methods of test for ceramic coatings - Part 1: Determination of coating thickness by contact probe filometer

General Information

• Status: Withdrawn
• Publication Date: 11-Mar-2003
• Withdrawal Date: 19-Apr-2016
• ICS: 17.040.20 - Properties of surfaces
• ICS: 25.220.99 - Other treatments and coatings
• ICS: 81.060.30 - Advanced ceramics
• Technical Committee: CEN/TC 184 - Advanced technical ceramics
• Drafting Committee: CEN/TC 184/WG 5 - Ceramic coatings
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 20-Apr-2016
• Mandate: M/BC/CEN/90/4 - Request concerning the realisation of a standardization programme in the field of advanced technical ceramics
• Ref Project: SIST EN 1071-1:2004 - Advanced technical ceramics - Methods of test for ceramic coatings - Part 1: Determination of coating thickness by contact probe filometer

Relations

• Replaces: ENV 1071-1:1993 - Advanced technical ceramics - Methods of test for ceramic coatings - Part 1: Determination of coating thickness by contact probe profilometer
• Effective Date: 22-Dec-2008
• Replaced By: EN ISO 18452:2016 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of thickness of ceramic films by contact-probe profilometer (ISO 18452:2005)
• Effective Date: 17-Dec-2014

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Advanced technical ceramics - Methods of test for ceramic coatings - Part 1: Determination of coating thickness by contact probe filometerHochleistungskeramik - Verfahren zur Prüfung keramischer Schichten - Teil 1: Bestimmung der Schichtdicke mit einem KontaktprofilometerCéramiques techniques avancées - Méthodes d'essai pour revetements céramiques - Partie 1: Détermination de l'épaisseur du revetement par profilometre a contactAdvanced technical ceramics - Methods of test for ceramic coatings - Part 1: Determination of coating thickness by contact probe filometer81.060.30Sodobna keramikaAdvanced ceramics25.220.99Druge obdelave in prevlekeOther treatments and coatingsICS:Ta slovenski standard je istoveten z:EN 1071-1:2003SIST EN 1071-1:2004en01-januar-2004SIST EN 1071-1:2004SLOVENSKI
STANDARDSIST ENV 1071-1:20001DGRPHãþD

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1071-1March 2003ICS 81.060.30Supersedes ENV 1071-1:1993English versionAdvanced technical ceramics - Methods of test for ceramiccoatings - Part 1: Determination of coating thickness by contactprobe filometerCéramiques techniques avancées - Méthodes d'essai pourrevêtements céramiques - Partie 1: Détermination del'épaisseur du revêtement par profilomètre à contactHochleistungskeramik - Verfahren zur Prüfung keramischerSchichten - Teil 1: Bestimmung der Schichtdicke mit einemKontaktprofilometerThis European Standard was approved by CEN on 28 November 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1071-1:2003 ESIST EN 1071-1:2004

Effect of amplification factor and leveling error on measured layerthickness.9Bibliography.12SIST EN 1071-1:2004
...