EN 13674-3:2006

Railway applications - Track - Rail - Part 3: Check rails

This European Standard specifies check rail profiles which have been designed for this purpose. It does not cover guard rails which are to protect vehicle, bridge, viaduct and other structures in the event of a derailment.
Three grades of steel and five rail profiles are specified.

Bahnanwendungen - Oberbau - Schienen - Teil 3: Radlenkerschienen

Diese Dokument legt Schienenprofile fest, die speziell für die Anwendung als Radlenker konstruiert wurden, und gilt nicht für Führungsschienen, die dafür bestimmt sind, bei Entgleisungen das Fahrzeug selbst sowie Brücken und andere Bauten zu schützen.
Drei  Stahlsorten und fünf Schienenprofile sind festgelegt.

Applications ferroviaires - Voie - Rail - Partie 3: Contre-rails

La présente partie de la Norme européenne spécifie les profils de contre-rails. Elle ne concerne pas les rails de sécurité dont le rôle est de protéger les véhicules, les ponts, les viaducs et autres structures dans le cas d'un déraillement.
Trois nuances d'acier et cinq profils de rails sont spécifiés

Železniške naprave - Zgornji ustroj - Tirnice - 3. del: Vodilne tirnice

General Information

• Status: Withdrawn
• Publication Date: 18-Apr-2006
• Withdrawal Date: 06-Jul-2010
• ICS: 93.100 - Construction of railways
• Technical Committee: CEN/TC 256 - Railway applications
• Drafting Committee: CEN/TC 256/SC 1/WG 4 - Rails
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 07-Jul-2010
• Completion Date: 07-Jul-2010
• Directive: 93/38/EEC - Procurement procedures of entities operating in the water, energy, transport and telecommunications sectors
• Directive: 96/48/EC - Interoperability of the trans-European high-speed rail system
• Mandate: M/024 - Mandate to CEN/CENELEC/ETSI for programming and standardization in the field of railway equipment
• Mandate: M/275 - Mandate to CEN/CENELEC/ETSI for standardization in the field of railway equipment on the interoperability of the Trans-European high-speed rail system
• Ref Project: SIST EN 13674-3:2006 - Railway applications - Track - Rail - Part 3: Check rails

Relations

• Merged Into: EN 13674-3:2006+A1:2010 - Railway applications - Track - Rail - Part 3: Check rails
• Effective Date: 19-Jan-2023

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Železniške naprave - Zgornji ustroj - Tirnice - 3. del: Vodilne tirniceBahnanwendungen - Oberbau - Schienen - Teil 3: RadlenkerschienenApplications ferroviaires - Voie - Rail - Partie 3: Contre-railsRailway applications - Track - Rail - Part 3: Check rails45.080Rails and railway componentsICS:Ta slovenski standard je istoveten z:EN 13674-3:2006SIST EN 13674-3:2006en01-oktober-2006SIST EN 13674-3:2006SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13674-3
April 2006 ICS 93.100 English Version
Railway applications - Track - Rail - Part 3: Check rails
Applications ferroviaires - Voie – Rails - Partie 3: Contre-rails
Bahnanwendungen - Oberbau - Schienen - Teil 3: Radlenkerschienen This European Standard was approved by CEN on 13 February 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2006 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13674-3:2006: ESIST EN 13674-3:2006

Rail profiles.9 Annex ZA (informative)
Relationship between this European Standard and the Essential Requirements of EU Directive 96/48/EC of 23 July 1996 on the interoperability of the trans-European high-speed rail system amended by the EU Directive 2004/50/EC of 29 April 2004.20 Bibliography.21
23 July 1996 on the interoperability of the trans-European high-speed rail system amended by the Directive 2004/50/EC of the European Parliament and of the Council of 29 April 2004. For relationship with EU directives, see informative Annex ZA, which is an integral part of this European Standard. This part of EN 13674 is the third of the series EN 13674 Railway applications — Track — Rail which consists of the following parts:  Part 1: Vignole railway rails 46 kg/m and above;  Part 2: Switch and crossing rails used in conjunction with Vignole railway rails 46 kg/m and above;  Part 3: Check rails;  Part 4: Vignole railway rails from 27 kg/m to, but excluding 46 kg/m. Other standards planned for publication include the following:  prEN 14587-1 Railway applications — Track — Flash butt welding of rails — Part 1: New R220, R260, R260Mn and R350HT grade rails in a fixed plant;  prEN 14587-2 Railway applications — Track — Flash butt welding of rails — Part 2: New R220, R260, R260Mn and R350HT grade rails by mobile welding machines at sites other than at a fixed plant;  prEN 14587-3 Railway applications — Track — Flash butt welding of rails — Part 3: Welding in association with crossing construction;  prEN 14730-1 Railway applications — Track — Aluminothermic welding of rails — Part 1: Approval of welding processes;  prEN 14730-2 Railway applications — Track — Aluminothermic welding of rails – Part 2: Qualification of aluminothermic welders, approval of contractors and acceptance of welds;  prEN 14811 Railway applications — Track — Special purpose rail — Grooved and associated construction;  prEN xxxxx Railway applications — Track — Restoration of rails by electric arc welding. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, SIST EN 13674-3:2006
...