Railway applications - Tank wagons - Part 4: Devices for top filling and emptying of liquid products

This European Standard is applicable to top devices of tank wagons used for liquid substances of RID carried in the liquid state and able to be top filled and emptied. Safety functions of these devices are subject to RID requirements and not described in this document.
This European Standard specifies the type of equipment which is fitted on the top of such tank wagons and the important dimensions for their connections.
This European Standard applies to new tank wagons built after the 1st January 2010.

Bahnanwendungen - Kesselwagen - Teil 4: Einrichtungen für Obenentleerung und Obenbefüllung von flüssigen Stoffen

Diese Europäische Norm gilt für die oberen Befüll- und Entleereinrichtungen von Kesselwagen, die für den Transport von flüssigen Stoffen des RID geeignet sind. Sicherheitsfunktionen dieser Einrichtungen unterliegen den Anforderungen der RID und werden in diesem Dokument nicht beschrieben.
Diese Europäische Norm legt die Art der Ausrüstung und die wichtigsten Maße der Anschlüsse fest, die auf dem Tankscheitel dieser Kesselwagen angeordnet werden.
Diese Europäische Norm gilt für neue Kesselwagen, die nach dem 1. Januar 2010 gebaut werden.

Applications ferroviaires - Wagons citernes - Partie 4: Dispositifs supérieurs de vidange et de remplissage par le haut pour produits liquides

La présente Norme européenne s'applique aux dispositifs supérieurs équipant les wagons citernes utilisés pour le transport de matières du RID à l'état liquide et pouvant être remplis et vidés par le haut. Les fonctions de sécurité de ces dispositifs sont soumises aux exigences du RID et ne sont pas décrites dans le présent document.
La présente Norme européenne définit le type d'équipement monté sur le haut de tels wagons citernes ainsi que les dimensions essentielles des raccordements.
La présente Norme européenne s’applique aux nouveaux wagons citernes fabriqués après le 1er janvier 2010.

Železniške naprave - Vagoni-cisterne - 4. del: Naprave, ki so nameščene na vrhu cisterne in so namenjene za polnjenje in praznjenje tekočin

Ta evropski standard velja za naprave, nameščene na vrhu vagonov-cistern za polnjenje in praznjenje tekočih snovi RID, ki se prevažajo v tekočem stanju, in se lahko polnijo in praznijo z vrha. Za varnostne funkcije naprav veljajo zahteve RID in niso opisane v tem dokumentu. Ta evropski standard določa vrsto opreme, ki se pritrdi na vrh takih vagonov-cistern, in pomembne mere za njihove priključke. Ta evropski standard velja za nove vagone-cisterne, narejene po 1. januarju 2010.

General Information

Status
Published
Publication Date
28-Jun-2011
Current Stage
9093 - Decision to confirm - Review Enquiry

RELATIONS

Buy Standard

Standard
EN 12561-4:2011
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Bahnanwendungen - Kesselwagen - Teil 4: Einrichtungen für Obenentleerung und Obenbefüllung von flüssigen StoffenApplications ferroviaires - Wagons citernes - Partie 4: Dispositifs supérieurs de vidange et de remplissage par le haut pour produits liquidesRailway applications - Tank wagons - Part 4: Devices for top filling and emptying of liquid products45.060.20Železniški vagoniTrailing stock13.300Varstvo pred nevarnimi izdelkiProtection against dangerous goodsICS:Ta slovenski standard je istoveten z:EN 12561-4:2011SIST EN 12561-4:2011en,fr,de01-oktober-2011SIST EN 12561-4:2011SLOVENSKI

STANDARDSIST EN 12561-4:20041DGRPHãþD
SIST EN 12561-4:2011
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12561-4
June 2011 ICS 13.300; 45.060.20 Supersedes EN 12561-4:2002English Version

Railway applications - Tank wagons - Part 4: Devices for top filling and emptying of liquid products

Applications ferroviaires - Wagons citernes - Partie 4: Dispositifs supérieurs de vidange et de remplissage par le haut pour produits liquides

Bahnanwendungen - Kesselwagen - Teil 4: Einrichtungen für Obenentleerung und Obenbefüllung von flüssigen Stoffen This European Standard was approved by CEN on 3 June 2011.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,

B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12561-4:2011: ESIST EN 12561-4:2011

EN 12561-4:2011 (E) 2 Contents Page Foreword ..............................................................................................................................................................3Introduction .........................................................................................................................................................41 Scope ......................................................................................................................................................52 Normative references ............................................................................................................................53 Terms and definitions ...........................................................................................................................54 Requirements .........................................................................................................................................54.1 General ....................................................................................................................................................54.2 Dimensions .............................................................................................................................................54.3 Filling and emptying devices ................................................................................................................64.4 Manhole ..................................................................................................................................................85 Positioning of equipment ......................................................................................................................8Bibliography ..................................................................................................................................................... 10 Figures Figure 1 — Examples of handle on blind flange ..............................................................................................7Figure 2 — Splash ring .......................................................................................................................................7Figure 3 — Arrangement of equipment ............................................................................................................9 Table Table 1 — Internal diameter of splash rings ....................................................................................................8 SIST EN 12561-4:2011

EN 12561-4:2011 (E) 3 Foreword This document (EN 12561-4:2011) has been prepared by Technical Committee CEN/TC 256 “Railway applications”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2011, and conflicting national standards shall be withdrawn at the latest by December 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 12561-4:2002. This European Standard Railway applications — Tank wagons consists of the following parts:  Part 1: Identification plates for tank wagons for the carriage of dangerous goods;  Part 2: Bottom emptying devices for liquid products including vapour return;  Part 3: Bottom filling and emptying devices for gases liquefied under pressure;  Part 4: Devices for top filling and emptying of liquid products;  P

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.