EN ISO 9455-5:2014
(Main)Soft soldering fluxes - Test methods - Part 5: Copper mirror test (ISO 9455-5:2014)
Soft soldering fluxes - Test methods - Part 5: Copper mirror test (ISO 9455-5:2014)
ISO 9455-5:2014 specifies a qualitative method for assessing the aggressiveness of a flux towards copper. The test is applicable to all fluxes of type 1 as defined in ISO 9454‑1.
Flussmittel zum Weichlöten - Prüfverfahren - Teil 5: Kupferspiegeltest (ISO 9455-5:2014)
Dieser Teil der ISO 9455 legt ein qualitatives Verfahren zur Beurteilung der Flussmittelreaktionsfähigkeit gegenüber Kupfer fest. Die Prüfung ist anwendbar auf alle Flussmittel der Klasse 1 nach ISO 9454-1.
Flux de brasage tendre - Méthodes d'essai - Partie 5: Essai au miroir de cuivre (ISO 9455-5:2014)
l'ISO 9455-5:2104 spécifie une méthode qualitative d'évaluation de l'agressivité d'un flux par rapport au cuivre. Cet essai est applicable à tous les flux de type 1 définis dans l'ISO 9454‑1.
Talila za mehko spajkanje - Preskusne metode - 5. del: Preskus z bakrovim zrcalom (ISO 9455-5:2014)
Standard EN ISO 9455-5 določa kvalitativno metodo za ocenjevanje agresivnosti talil na baker. Ta preskus velja za vsa talila tipa 1 iz standarda ISO 9454-1.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 9455-5:2014
01-september-2014
1DGRPHãþD
SIST EN 29455-5:1998
Talila za mehko spajkanje - Preskusne metode - 5. del: Preskus z bakrovim
zrcalom (ISO 9455-5:2014)
Soft soldering fluxes - Test methods - Part 5: Copper mirror test (ISO 9455-5:2014)
Flussmittel zum Weichlöten - Prüfverfahren - Teil 5: Kupferspiegeltest (ISO 9455-5:2014)
Flux de brasage tendre - Méthodes d'essai - Partie 5: Essai au miroir de cuivre (ISO
9455-5:2014)
Ta slovenski standard je istoveten z: EN ISO 9455-5:2014
ICS:
25.160.50 Trdo in mehko lotanje Brazing and soldering
SIST EN ISO 9455-5:2014 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 9455-5:2014
---------------------- Page: 2 ----------------------
SIST EN ISO 9455-5:2014
EUROPEAN STANDARD
EN ISO 9455-5
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2014
ICS 25.160.50 Supersedes EN 29455-5:1993
English Version
Soft soldering fluxes - Test methods - Part 5: Copper mirror test
(ISO 9455-5:2014)
Flux de brasage tendre - Méthodes d'essai - Partie 5: Essai Flussmittel zum Weichlöten - Prüfverfahren - Teil 5:
au miroir de cuivre (ISO 9455-5:2014) Kupferspiegeltest (ISO 9455-5:2014)
This European Standard was approved by CEN on 28 May 2014.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 9455-5:2014 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 9455-5:2014
EN ISO 9455-5:2014 (E)
Contents Page
Foreword .3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 9455-5:2014
EN ISO 9455-5:2014 (E)
Foreword
This document (EN ISO 9455-5:2014) has been prepared by Technical Committee ISO/TC 44 "Welding and
allied processes" in collaboration with Technical Committee CEN/TC 121 “Welding and allied processes” the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by January 2015, and conflicting national standards shall be withdrawn at
the latest by January 2015.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 29455-5:1993.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 9455-5:2014 has been approved by CEN as EN ISO 9455-5:2014 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 9455-5:2014
---------------------- Page: 6 ----------------------
SIST EN ISO 9455-5:2014
INTERNATIONAL ISO
STANDARD 9455-5
Second edition
2014-07-01
Soft soldering fluxes — Test
methods —
Part 5:
Copper mirror test
Flux de brasage tendre — Méthodes d’essai —
Partie 5: Essai au miroir de cuivre
Reference number
ISO 9455
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.