EN 1348:2007
(Main)Adhesives for tiles - Determination of tensile adhesion strength for cementitious adhesives
Adhesives for tiles - Determination of tensile adhesion strength for cementitious adhesives
This European Standard specifies a method for the determination of the tensile adhesion strength of cementitious ceramic tile adhesives.
This European Standard is applicable to all cementitious adhesives and cementitious adhesives with separate components for internal and external ceramic tile installations on walls and floors.
This European Standard does not contain performance requirements or recommendations for the design and installation of ceramic tiles.
NOTE Ceramic tile adhesives can be used also for other kinds of tiles (natural and agglomerated stones etc.), if they do not adversely affect the stones.
Mörtel und Klebstoffe für Fliesen und Platten - Bestimmung der Haftfestigkeit zementhaltiger Mörtel für innen und außen
Colles à carrelage - Détermination de l'adhérence par traction des mortiers-colles
La présente Norme européenne spécifie une méthode de détermination de l’adhérence par traction des mortiers-colles pour carreaux céramiques.
Elle s’applique à tous les mortiers-colles dont ceux comprenant des composants séparés pour la pose des carreaux céramiques sur les murs et les sols intérieurs ou extérieurs.
La présente Norme européenne ne contient pas d’exigences de performance, ni de recommandations pour la conception et la pose des carreaux céramiques.
NOTE Les colles pour carreaux céramiques peuvent également être utilisées pour d’autres types de carrelages (carreaux de pierres naturelles ou de pierres reconstituées etc.) lorsqu’elles sont compatibles.
Lepila za ploščice - Ugotavljanje natezne adhezijske trdnosti cementnih lepil
General Information
- Status
- Withdrawn
- Publication Date
- 28-Aug-2007
- Withdrawal Date
- 13-Apr-2025
- Technical Committee
- CEN/TC 67 - Ceramic tiles
- Drafting Committee
- CEN/TC 67/WG 3 - Adhesives and grouts for tiles
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 15-Feb-2017
- Completion Date
- 14-Apr-2025
- Directive
- 89/106/EEC - Construction products
Relations
- Effective Date
- 22-Dec-2008
- Effective Date
- 22-Dec-2008
- Effective Date
- 12-Dec-2012
Frequently Asked Questions
EN 1348:2007 is a standard published by the European Committee for Standardization (CEN). Its full title is "Adhesives for tiles - Determination of tensile adhesion strength for cementitious adhesives". This standard covers: This European Standard specifies a method for the determination of the tensile adhesion strength of cementitious ceramic tile adhesives. This European Standard is applicable to all cementitious adhesives and cementitious adhesives with separate components for internal and external ceramic tile installations on walls and floors. This European Standard does not contain performance requirements or recommendations for the design and installation of ceramic tiles. NOTE Ceramic tile adhesives can be used also for other kinds of tiles (natural and agglomerated stones etc.), if they do not adversely affect the stones.
This European Standard specifies a method for the determination of the tensile adhesion strength of cementitious ceramic tile adhesives. This European Standard is applicable to all cementitious adhesives and cementitious adhesives with separate components for internal and external ceramic tile installations on walls and floors. This European Standard does not contain performance requirements or recommendations for the design and installation of ceramic tiles. NOTE Ceramic tile adhesives can be used also for other kinds of tiles (natural and agglomerated stones etc.), if they do not adversely affect the stones.
EN 1348:2007 is classified under the following ICS (International Classification for Standards) categories: 83.180 - Adhesives; 91.100.10 - Cement. Gypsum. Lime. Mortar. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 1348:2007 has the following relationships with other standards: It is inter standard links to EN 1348:1997, EN 1348:1997/A1:1998, EN 12004-2:2017. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 1348:2007 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase EN 1348:2007 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CEN standards.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Adhesives for tiles - Determination of tensile adhesion strength for cementitious adhesivesColles a carrelage - Détermination de l'adhérence par traction des mortiers-collesMörtel und Klebstoffe für Fliesen und Platten - Bestimmung der Haftfestigkeit zementhaltiger Mörtel für innen und außenTa slovenski standard je istoveten z:EN 1348:2007SIST EN 1348:2007en,fr,de91.100.10Cement. Mavec. Apno. MaltaCement. Gypsum. Lime. Mortar83.180LepilaAdhesivesICS:SIST EN 1348:1998/A1:2000SIST EN 1348:19981DGRPHãþDSLOVENSKI
STANDARDSIST EN 1348:200701-december-2007
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1348August 2007ICS 83.180; 91.100.10Supersedes EN 1348:1997
English VersionAdhesives for tiles - Determination of tensile adhesion strengthfor cementitious adhesivesColles à carrelage - Détermination de l'adhérence partraction des mortiers-collesMörtel und Klebstoffe für Fliesen und Platten - Bestimmungder Haftfestigkeit zementhaltiger Mörtel für innen undaußenThis European Standard was approved by CEN on 21 January 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2007 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1348:2007: E
1 Scope This European Standard specifies a method for the determination of the tensile adhesion strength of cementitious ceramic tile adhesives. This European Standard is applicable to all cementitious adhesives and cementitious adhesives with separate components for internal and external ceramic tile installations on walls and floors. This European Standard does not contain performance requirements or recommendations for the design and installation of ceramic tiles. NOTE Ceramic tile adhesives can be used also for other kinds of tiles (natural and agglomerated stones etc.), if they do not adversely affect the stones. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated re
...
제목: EN 1348:2007 - 타일을 위한 접착제 - 시멘트성 접착제의 인장 접착강도 결정 내용: 이 유럽 표준은 시멘트성 도자기 타일 접착제의 인장 접착강도를 결정하기 위한 방법을 규정합니다. 이 유럽 표준은 내부 및 외부 세라믹 타일 설치를 위한 시멘트성 접착제와 구성요소가 별도인 시멘트성 접착제에 적용됩니다. 이 유럽 표준은 도자기 타일의 디자인과 설치에 대한 성능 요구사항이나 권장사항을 포함하고 있지 않습니다. 참고: 도자기 타일 접착제는 다른 종류의 타일 (자연 돌 및 편조돌 등)에도 사용할 수 있으나, 돌에 부정적인 영향을 미치지 않는 경우입니다.
The article discusses EN 1348:2007, which is a European Standard for determining the tensile adhesion strength of cementitious ceramic tile adhesives. This standard applies to all cementitious adhesives used for internal and external ceramic tile installations on walls and floors. However, it does not provide requirements or recommendations for the design and installation of ceramic tiles. The article also mentions that the cementitious adhesive can be used for other types of tiles, such as natural and agglomerated stones, as long as it does not harm the stones.
記事のタイトル：EN 1348:2007 - タイル用接着剤 - セメント性接着剤の引張り接着強さの測定 記事の内容：このヨーロッパ規格は、セメント性セラミックタイル接着剤の引張り接着強さを測定するための方法を規定しています。 このヨーロッパ規格は、壁や床に使用されるセラミックタイルの内部および外部の設置に使用される、すべてのセメント性接着剤および別々の成分を持つセメント性接着剤に適用されます。 ただし、このヨーロッパ規格には、セラミックタイルの設計と設置に関する性能要件や推奨事項は含まれていません。 注意：セラミックタイル接着剤は、他の種類のタイル（天然石や凝集石など）にも使用可能ですが、それらの石に悪影響を及ぼさない場合に限ります。
기사 제목: EN 1348:2007 - 타일용 접착제 - 시멘트 베이스 접착제의 인장 접착 강도 측정 기사 내용: 이 유럽 표준은 시멘트 베이스 세라믹 타일 접착제의 인장 접착 강도를 결정하기 위한 방법을 명시합니다. 이 유럽 표준은 모든 시멘트 베이스 접착제와 벽 및 바닥에 대한 내/외부 세라믹 타일 설치를 위한 별도 구성 요소가 있는 시멘트 베이스 접착제에 적용됩니다. 이 유럽 표준은 세라믹 타일의 설계 및 설치에 대한 성능 요구 사항이나 권장사항을 포함하지 않습니다. 참고: 세라믹 타일 접착제는 다른 종류의 타일 (자연 돌 및 집합 돌 등)에도 사용될 수 있으나, 그 타일에 악영향을 미치지 않는 경우에만 사용할 수 있습니다.
The article discusses the European Standard EN 1348:2007, which outlines a method for determining the tensile adhesion strength of cementitious ceramic tile adhesives. The standard applies to all cementitious adhesives used for installing ceramic tiles on walls and floors, both internally and externally. However, it does not provide performance requirements or installation recommendations for ceramic tiles. Additionally, it notes that these adhesives can also be used for other types of tiles, such as natural or agglomerated stones, as long as they do not damage the stones.
記事のタイトル：EN 1348:2007 - タイル用接着剤 - セメントベース接着剤の引張り接着強度の測定 記事内容：この欧州規格は、セメントベースのセラミックタイル接着剤の引張り接着強度を測定する方法を規定しています。 この欧州規格は、すべてのセメントベースの接着剤および内外の壁と床へのセラミックタイルの設置に使用するセメントベースの接着剤の場合に適用されます。 ただし、この欧州規格にはセラミックタイルの設計や設置に関する性能要件や推奨事項は含まれていません。 注：セラミックタイル接着剤は、他の種類のタイル（天然石や合成石など）にも使用することができますが、それらの石に悪影響を及ぼさない場合に限り使用できます。
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...