EN ISO 3451-5:2002

Plastics - Determination of ash - Part 5: Poly(vinyl chloride) (ISO 3451-5:2002)

This part of ISO 3451 specifies three methods for the determination of the ash of poly(vinyl chloride). The general procedures given in ISO 3451-1 are followed. For ash, method A is used. For sulfated ash, methods B and C are used. All three methods are applicable to resins, compounds and finished products. Methods B and C are applicable when lead-containing compounds are present.

Kunststoffe - Bestimmung der Asche - Teil 5: Poly(vinylchlorid) (ISO 3451-5:2002)

Dieser Teil von ISO 4351 legt drei Verfahren zur Bestimmung der Asche von Poly(vinylchlorid) fest. Es wird nach den in ISO 3451-1 angegebenen allgemeinen Durchführungsrichtlinien verfahren. Bei Asche wird Verfahren A angewendet. Bei Sulfatasche werden die Verfahren B und C angewendet. Bei Harzen, Mischungen und Fertigteilen werden alle drei Verfahren angewendet. Bei Anwesenheit von bleihaltigen Verbindungen sind die Verfahren B und C anzuwenden.

Plastiques - Détermination du taux de cendres - Partie 5: Poly(chlorure de vinyle) (ISO 3451-5:2002)

L'ISO 3451-5:2002 spécifie trois méthodes pour la détermination du taux de cendres du poly(chlorure de vinyle). Les modes opératoires généraux donnés dans l'ISO 3451-1 sont suivis. Pour les cendres, on utilise la méthode A, tandis que pour les cendres sulfatées, on applique les méthodes B et C. Les trois méthodes peuvent être utilisées pour les résines, les compositions et les produits finis. Les méthodes B et C sont recommandées en présence de composés contenant du plomb.

Polimerni materiali - Določevanje pepela - 5. del: Polivinilklorid (ISO 3451-5:2002)

General Information

• Status: Published
• Publication Date: 30-Jun-2002
• Withdrawal Date: 30-Jan-2003
• ICS: 83.080.20 - Thermoplastic materials
• Technical Committee: CEN/TC 249 - Plastics
• Drafting Committee: CEN/TC 249 - Plastics
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 01-Jul-2002
• Completion Date: 01-Jul-2002
• Ref Project: SIST EN ISO 3451-5:2003 - Plastics - Determination of ash - Part 5: Poly(vinyl chloride) (ISO 3451-5:2002)

Relations

• Replaces: EN ISO 3451-5:1996 - Plastics - Determination of ash - Part 5: Poly(vinyl chloride) (ISO 3451-5:1989)
• Effective Date: 22-Dec-2008
• Revised: prEN ISO 3451-5 - Plastics - Determination of ash - Part 5: Poly(vinyl chloride) (ISO/DIS 3451-5:2024)
• Effective Date: 18-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 3451-5:2003
01-maj-2003
1DGRPHãþD
SIST EN ISO 3451-5:2000
3ROLPHUQLPDWHULDOL'RORþHYDQMHSHSHODGHO3ROLYLQLONORULG,62
Plastics - Determination of ash - Part 5: Poly(vinyl chloride) (ISO 3451-5:2002)
Kunststoffe - Bestimmung der Asche - Teil 5: Poly(vinylchlorid) (ISO 3451-5:2002)
Plastiques - Détermination du taux de cendres - Partie 5: Poly(chlorure de vinyle) (ISO
3451-5:2002)
Ta slovenski standard je istoveten z: EN ISO 3451-5:2002
ICS:
83.080.20 Plastomeri Thermoplastic materials
SIST EN ISO 3451-5:2003 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 3451-5:2003

---------------------- Page: 2 ----------------------

SIST EN ISO 3451-5:2003
EUROPEAN STANDARD
EN ISO 3451-5
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2002
ICS 83.080.20 Supersedes EN ISO 3451-5:1996
English version
Plastics - Determination of ash - Part 5: Poly(vinyl chloride) (ISO
3451-5:2002)
Plastiques - Détermination du taux de cendres - Partie 5: Kunststoffe - Bestimmung der Asche - Teil 5:
Poly(chlorure de vinyle) (ISO 3451-5:2002) Poly(vinylchlorid) (ISO 3451-5:2002)
This European Standard was approved by CEN on 24 June 2002.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2002 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 3451-5:2002 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 3451-5:2003
EN ISO 3451-5:2002 (E)
CORRECTED  2002-07-24
Foreword
This document (EN ISO 3451-5:2002) has been prepared by Technical Committee ISO/TC 61
"Plastics" in collaboration with Technical Committee CEN/TC 249 "Plastics", the secretariat of
which is held by IBN.
This European Standard shall be given the status of a national standard, either by publication
of an identical text or by endorsement, at the latest by January 2003, and conflicting national
standards shall be withdrawn at the latest by January 2003.
This document supersedes EN ISO 3451-5:1996.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,
Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the
United Kingdom.
Endorsement notice
The text of the International Standard ISO 3451-5:2002 has been approved by CEN as a
European Standard without any modifications.
NOTE Normative references to International Standards are listed in annex ZA (normative).
2

---------------------- Page: 4 ----------------------

SIST EN ISO 3451-5:2003
EN ISO 3451-5:2002 (E)
Annex ZA
(normative)
Normative references to international publications
with their relevant European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions
of any of these publications apply to this European Standard only when incorporated in it by
amendment or revision. For undated references the latest edition of the publication referred to
applies (including amendments).
NOTE Where an International Publication has been modified by common modifications,
indicated by (mod.), the relevant EN/HD applies.
Publication Year Title EN Year
ISO 3451-1 1997 Plastics - Determination of ash - Part EN ISO 3451-1 1997
1: General methods
3

---------------------- Page: 5 ----------------------

SIST EN ISO 3451-5:2003

---------------------- Page: 6 ----------------------

SIST EN ISO 3451-5:2003
INTERNATIONAL ISO
STANDARD 3451-5
Second edition
2002-07-01
Plastics — Determination of ash —
Part 5:
...