EN 10137-1:1995

Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions - Part 1: General delivery conditions

1.1         This European Standard spe~fies requirements for plates and wide flats of high yield strength alloy special steels.   Part 1 of this European Standard specifies the general delivery conditions.  Part 2 of this European Standard specifies the delivery conditions for quenched and tempered steels in the grades and qualities given in table 1(chemical composition) and tables 2 and 3 (mechanical properties) of Part 2.  Part 3 of this European Standard specifies the delivery conditions for precipitation hardened steels in the grades and qualities given in table 1 (chemical composition) and tables 2 and 3 (mechanical properties)of Part 3.           The steels specified in this European Standard are especially intended for use in heavily loaded parts of welded structures such as bridges, flood gates, storage tanks, water supply tanks, buildings, crane structures, etc. for service at ambient and low temperatures.           1.2         This European Standard does not apply to products for pressure vessels and products for which other EURONORMS exist or European Standards dealing with steels for general structural applications exist or are being prepared:  - Hot-rolled products of non-alloy structural steels - (see EN 10025). - Semi-finished products for forging in general purpose structural steels - (see EURONORM 30). - Weldable fine grain structural steels - (see EN 10113 Parts 1 - 3). - Structural steels with improved atmospheric corrosion resistance -(see EN 10155). - Flat products in high yield strength steels for cold forming - wide flats, sheet/plate, wide and narrow strip - (see EN 10149 Parts 1 - 3). - Steels for shipbuilding - normal and high strength qualities - (see EURONORM 156). - Hot finished structural hollow sections (see EN 10210-1).

Blech und Breitflachstahl aus Baustählen mit höherer Streckgrenze im vergüteten oder im ausscheidungsgehärteten Zustand - Teil 1: Allgemeine Lieferbedingungen

Diese Europäische Norm enthält die Anforderungen an Blech und Breitflachstahl aus legierten Edelstählen mit höherer Streckgrenze. Teil 1 dieser Europäischen Norm enthält die allgemeinen Lieferbedingungen. Teil 2 dieser Europäischen Norm enthält die Lieferbedingungen für vergütete Stähle der Sorten und Gütegruppen nach Tabelle 1 (chemische Zusammensetzung) sowie nach d den Tabellen 2 und 3 (mechanische Eigenschaften) des Teils 2.

Tôles et larges plats en aciers de construction à haute limite d'élasticité à l'état trempé et revenu ou durci par précipitation - Partie 1: Conditions générales de livraison

La présente norme européenne spécifie les exigences pour les tôles et larges plats en aciers spéciaux alliés à haute limite d'élasticité. La partie 1 de la présente norme spécifie les conditions générales de livraison. La partie 2 de la présente norme européenne spécifie les conditions de livraison des aciers trempés et revenus dans les nuances et les qualités données au tableau 1 (composition chimique) at aux tableaux 2 et 3 (caractéristiques mécaniques) de la partie 2.

Plošče in široki trakovi iz konstrukcijskih jekel z veliko napetostjo tečenja v poboljšanem ali izločevalno utrjenem stanju - 1. del: Splošni dobavni pogoji

General Information

• Status: Withdrawn
• Publication Date: 19-Sep-1995
• Withdrawal Date: 09-Nov-2004
• ICS: 77.140.50 - Flat steel products and semi-products
• Technical Committee: ECISS/TC 103 - Structural steels other than reinforcements
• Drafting Committee: ECISS/TC 10 - Structural steels - Qualities
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 10-Nov-2004
• Completion Date: 10-Nov-2004
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/005 - Mandate to CEN/ECISS concerning standardization in the iron and steel sector
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: SIST EN 10137-1:1997 - Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions - Part 1: General delivery conditions

Relations

• Replaced By: EN 10025-1:2004 - Hot rolled products of structural steels - Part 1: General technical delivery conditions
• Effective Date: 22-Dec-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Blech und Breitflachstahl aus Baustählen mit höherer Streckgrenze im vergüteten oder im ausscheidungsgehärteten Zustand - Teil 1: Allgemeine LieferbedingungenTôles et larges plats en aciers de construction a haute limite d'élasticité a l'état trempé et revenu ou durci par précipitation - Partie 1: Conditions générales de livraisonPlates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions - Part 1: General delivery conditions77.140.50SROL]GHONLFlat steel products and semi-products
...