EN 10155:1993

Structural steels with improved atmospheric corrosion resistance - Technical delivery conditions

1.1         This European Standard specifies requirements for long products and flat products of hot-rolled steels with improved atmospheric corrosion resistance (alloyed special steel according to EN 10020) in the grades and qualities given in tables 3 (chemical composition), 5 and 6 (mechianical properties) in the usual delivery condition as given in 7.2.           The thicknesses in which products of the steel grades and qualities specified in this European Standard may be supplied are given in table 2. The application of this standard to greater thicknesses shall be agreed at the time of the enquiry and order. Option 1.           The steels specified in this European Standard are intended for use in welded, bolted and riveted components which shall have enhanced resistance to atmospheric corrosion, for service at ambient temperatures (subject to the restrictions described in 7.5.1).           They are not intended to be heat treated except products delivered in the delivery condition N. Stress relief annealing is permitted. Products delivered in the N condition may be normalized and hot formed after delivery (see clause 3).           1.2         This European Standard does not apply to structural steels for use in the applications referred to in 1.1 for which specific EURONORMS exist or European Standards dealing with steels for general structural applications are being prepared: -  non-alloy structural steels - (see EN 10025); -  steels for simple pressure vessels - (see EN 10207); -  non-alloy steel sheet and strip for pressure purposes - (see EN 10028 part 1 - 3); -  reinforcing bars (not for prestressing) - (see prEN 10080)  1); -  weldable fine grain structural steel - (see EN 10113 part 1 - 3); -  hot finished structural hollow sections - (see EN 10210-1).  1. Draft is under discussion

Wetterfeste Baustähle - Technische Lieferbedingungen

Diese Europäische Norm enthält die Anforderungen an Langerzeugnisse und an Flacherzeugnisse aus warmgewalzten, wetterfesten Baustählen (legierte Edelstähle nach EN 10020) der Sorten und Gütegruppen nach Tabelle 3 (chemische Zusammensetzung) sowie nach den Tabellen 5 und 6 (mechanische Eigenschaften) im üblichen Lieferzustand nach 7.2.

Aciers de construction à résistance améliorée à la corrosion atmosphérique - Conditions techniques de livraison

La présente norme européenne spécifie les caractéristiques des produits longs et des produits plats en aciers laminés à chaud à résistance améliorée à la corrosion atmosphérique (aciers spéciaux alliés selon l'EN 10020), dans les nuances et qualités indiquées dans les tableaux 3 (composition chimique), 5 et 6 (caractéristiques mécaniques), dans les conditions de livraison normales indiquées en 7.2.

Konstrukcijska jekla z izboljšano atmosfersko korozijsko obstojnostjo - Tehnični dobavni pogoji

General Information

• Status: Withdrawn
• Publication Date: 23-Jun-1993
• Withdrawal Date: 09-Nov-2004
• ICS: 77.140.10 - Heat-treatable steels
• Technical Committee: ECISS/TC 103 - Structural steels other than reinforcements
• Drafting Committee: ECISS/TC 10 - Structural steels - Qualities
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 10-Nov-2004
• Completion Date: 10-Nov-2004
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Mandate: M/BC/CEN/87/15 - ECISS - 2nd programme
• Ref Project: SIST EN 10155:1998 - Structural steels with improved atmospheric corrosion resistance - Technical delivery conditions

Relations

• Replaced By: EN 10025-1:2004 - Hot rolled products of structural steels - Part 1: General technical delivery conditions
• Effective Date: 22-Dec-2008
• Replaced By: EN 10025-5:2004 - Hot rolled products of structural steels - Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance
• Effective Date: 22-Dec-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Wetterfeste Baustähle - Technische LieferbedingungenAciers de construction a résistance améliorée a la corrosion atmosphérique - Conditions techniques de livraisonStructural steels with improved atmospheric corrosion resistance - Technical delivery conditions77.140.10Jekla za toplotno obdelavoHeat-treatable steelsICS:Ta slovenski standard je istoveten z:EN 10155:1993SIST EN 10155:1998en01-avgust-1998SIST EN 10155:1998SLOVENSKI
STANDARD



SIST EN 10155:1998



SIST EN 10155:1998



SIST EN 10155:1998



SIST EN 10155:1998



SIST EN 10155:1998
...