Small craft - Liquefied petroleum gas (LPG) systems (ISO 10239:2014)

ISO 10239:2014 covers the installation of permanently installed liquefied petroleum gas LPG systems and LPG burning appliances on small craft of up to 24 m length of hull.
It does not cover devices used for LPG-fuelled propulsion engines or LPG-driven generators.
It covers cooking appliances with internal LPG cartridges, with a capacity of 225 g or less (See Annex D).
It covers storage of all LPG cylinders but is not intended to regulate the technical requirements for such cylinders that are subject to national regulations
It does not contain procedures for commissioning the LPG installation.

Kleine Wasserfahrzeuge - Flüssiggas-Anlagen (LPG) (ISO 10239:2014)

Petits navires - Installations alimentées en gaz de pétrole liquéfiés (GPL) (ISO 10239:2014)

L'ISO 10239:2014 couvre l'installation des systèmes alimentées en gaz de pétrole liquéfié (GPL) installés à demeure et les appareils brûlant du GPL installés sur les petits navires d'une longueur de coque inférieure ou égale à 24 m.
Elle ne couvre pas les dispositifs utilisés pour les moteurs de propulsion alimentés en GPL ou les générateurs alimentés au GPL.
Elle couvre les appareils comportant des cartouches de GPL d'une capacité inférieure ou égale à 225 g.
Elle couvre le stockage de toutes les bouteilles de GPL mais n'est pas destinée à réglementer les exigences techniques des bouteilles de GPL, soumises aux réglementations nationales.
Elle ne comprend pas de procédures de mise en service des installations au GPL.

Mala plovila - Sistemi za utekočinjeni naftni plin (LPG) (ISO 10239:2014)

Ta mednarodni standard zajema namestitev trajno nameščenih sistemov za utekočinjeni naftni plin (LPG) in aparatov na utekočinjeni naftni plin na malih plovilih z dolžino trupa do 24 m. Ne zajema naprav, ki se uporabljajo v pogonskih motorjih na utekočinjeni naftni plin ali generatorjih na utekočinjeni naftni plin. Ta mednarodni standard zajema aparate za pripravo hrane z notranjimi kartušami z utekočinjenim naftnim plinom s prostornino
225 g ali manj (glej dodatek D). Zajema shranjevanje vseh jeklenk za utekočinjeni naftni plin, ni pa namenjen urejanju tehničnih zahtev za take jeklenke, za katere veljajo nacionalni predpisi. Ne vsebuje postopkov za začetek obratovanja inštalacije za utekočinjeni naftni plin. OPOMBA Za nove oblike, materiale in metode sestavljanja, ki zagotavljajo vsaj enakovredne rezultate, se lahko šteje, da izpolnjujejo zahteve tega mednarodnega standarda, ko jih odobri ustrezni organ.

General Information

Status
Withdrawn
Publication Date
02-Dec-2014
Withdrawal Date
22-Aug-2017
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
23-Aug-2017

Relations

Buy Standard

Standard
EN ISO 10239:2015
English language
27 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 10239:2015
01-marec-2015
1DGRPHãþD
SIST EN ISO 10239:2008
0DODSORYLOD6LVWHPL]DXWHNRþLQMHQLQDIWQLSOLQ /3*  ,62
Small craft - Liquefied petroleum gas (LPG) systems (ISO 10239:2014)
Kleine Wasserfahrzeuge - Flüssiggas-Anlagen (LPG) (ISO 10239:2014)
Petits navires - Installations alimentées en gaz de pétrole liquéfiés (GPL) (ISO
10239:2014)
Ta slovenski standard je istoveten z: EN ISO 10239:2014
ICS:
47.080 ýROQL Small craft
75.160.30 Plinska goriva Gaseous fuels
SIST EN ISO 10239:2015 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 10239:2015

---------------------- Page: 2 ----------------------

SIST EN ISO 10239:2015

EUROPEAN STANDARD
EN ISO 10239

NORME EUROPÉENNE

EUROPÄISCHE NORM
December 2014
ICS 47.080 Supersedes EN ISO 10239:2008
English Version
Small craft - Liquefied petroleum gas (LPG) systems (ISO
10239:2014)
Petits navires - Installations alimentées en gaz de pétrole Kleine Wasserfahrzeuge - Flüssiggas-Anlagen (LPG) (ISO
liquéfiés (GPL) (ISO 10239:2014) 10239:2014)
This European Standard was approved by CEN on 13 September 2014.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10239:2014 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 10239:2015
EN ISO 10239:2014 (E)
Contents Page
Foreword .3
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 94/25/EC as amended by Directive 2003/44/EC .4

2

---------------------- Page: 4 ----------------------

SIST EN ISO 10239:2015
EN ISO 10239:2014 (E)
Foreword
This document (EN ISO 10239:2014) has been prepared by Technical Committee ISO/TC 188 “Small craft”
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by June 2015, and conflicting national standards shall be withdrawn at
the latest by December 2015.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 10239:2008.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive.
For relationship with EU Directive, see informative Annex ZA, which is an integral part of this document.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 10239:2014 has been approved by CEN as EN ISO 10239:2014 without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 10239:2015
EN ISO 10239:2014 (E)
Annex ZA
(informative)

Relationship betwe
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.