iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

ENV 13154-1:2000

(Main)

Data communication for HVAC application - Field net - Part 1: Objects

Data communication for HVAC application - Field net - Part 1: Objects

This prestandard defines FLN-objects and FLN-services to be used on a field level for system neutral exchange of data for HVAC applications. This prestandard defines the semantics of the objects and the abstract services applicable to them and it defines an optional syntax to be used to exchange data with communication front-end unit. The syntax of the object data on the underlying communication (bus) protocol is not within the scope of this prestandard.

Izmenjava podatkov v aplikacijah HVAC – Omrežje med izvršilnimi členi – 1. del: Objekti

General Information

Status
Withdrawn
Publication Date
17-Oct-2000
Withdrawal Date
26-Nov-2007
ICS
35.240.67 - IT applications in building and construction industry
35.240.99 - IT applications in other fields
97.120 - Automatic controls for household use
Technical Committee
CEN/TC 247 - Controls for mechanical building services
Drafting Committee
CEN/TC 247/WG 4 - Open System Data Transmission
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
27-Nov-2007
Completion Date
27-Nov-2007
Ref Project
SIST ENV 13154-1:2004 - Data communication for HVAC application - Field net - Part 1: Objects

Relations

Parent
ENV 13154-2:1998 - Data communication for HVAC application field net - Part 2: Protocols
Effective Date
22-Dec-2008

Buy Standard

ENV 13154-1:2004ENV 13154-1:2004
PreviousNext
Standardization document
ENV 13154-1:2004
English language
74 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST ENV 13154-1:2004
01-november-2004
,]PHQMDYDSRGDWNRYYDSOLNDFLMDK+9$&±2PUHåMHPHGL]YUãLOQLPLþOHQL±GHO
2EMHNWL
Data communication for HVAC application - Field net - Part 1: Objects
Ta slovenski standard je istoveten z: ENV 13154-1:2000
ICS:
35.240.99 8SRUDEQLãNHUHãLWYH,7QD IT applications in other fields
GUXJLKSRGURþMLK
97.120 Avtomatske krmilne naprave Automatic controls for
za dom household use
SIST ENV 13154-1:2004 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ENV 13154-1:2004

---------------------- Page: 2 ----------------------

SIST ENV 13154-1:2004

---------------------- Page: 3 ----------------------

SIST ENV 13154-1:2004

---------------------- Page: 4 ----------------------

SIST ENV 13154-1:2004

---------------------- Page: 5 ----------------------

SIST ENV 13154-1:2004

---------------------- Page: 6 ----------------------

SIST ENV 13154-1:2004

---------------------- Page: 7 ----------------------

SIST ENV 13154-1:2004

---------------------- Page: 8 ----------------------

SIST ENV 13154-1:2004

---------------------- Page: 9 ----------------------

SIST ENV 13154-1:2004

---------------------- Page: 10 ----------------------

SIST ENV 13154-1:2004

---------------------- Page: 11 ----------------------

SIST ENV 13154-1:2004

---------------------- Page: 12 ----------------------

SIST ENV 13154-1:2004

---------------------- Page: 13 ----------------------

SIST ENV 13154-1:2004

---------------------- Page: 14 ----------------------

SIST ENV 13154-1:2004

---------------------- Page: 15 ----------------------

SIST ENV 13154-1:2004

---------------------- Page: 16 ----------------------

SIST ENV 13154-1:2004

---------------------- Page: 17 ----------------------

SIST ENV 13154-1:2004

---------------------- Page: 18 ----------------------

SIST ENV 13154-1:2004

---------------------- Page: 19 ----------------------

SIST ENV 13154-1:2004

---------------------- Page: 20 ----------------------

SIST ENV 13154-1:2004

---------------------- Page: 21 ----------------------

SIST ENV 13154-1:2004

---------------------- Page: 22 ----------------------

SIST ENV 13154-1:2004

---------------------- Page: 23 ----------------------

SIST ENV 13154-1:2004

---------------------- Page: 24 ----------------------

SIST ENV 13154-1:2004

---------------------- Page: 25 ----------------------

SIST ENV 13154-1:2004

---------------------- Page: 26 ----------------------

SIST ENV 13154-1:2004

---------------------- Page: 27 ----------------------

SIST ENV 13154-1:2004

---------------------- Page: 28 ----------------------

SIST ENV 13154-1:2004

---------------------- Page: 29 ----------------------

SIST ENV 13154-1:2004

---------------------- Page: 30 ----------------------

SIST ENV 13154-1:2004

---------------------- Page: 31 ----------------------

SIST ENV 13154-1:2004

---------------------- Page: 32 ----------------------

SIST ENV 13154-1:2004

---------------------- Page: 33 ----------------------

SIST ENV 13154-1:2004

---------------------- Page: 34 ----------------------

SIST ENV 13154-1:2004

---------------------- Page: 35 ---
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 14908-2:2014(Main)
Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 2: Twisted Pair Communication
SIST EN 14908-2:2014

This European Standard specifies the control network protocol (CNP) free-topology twisted-pair channel for networked control systems in commercial Building Automation, Controls and Building Management and is used in conjunction with EN 14908-1:2014. The channel supports communication at 78,125 kbit/s between multiple nodes, each of which consists of a transceiver, a protocol processor, an application processor, a power supply, and application electronics.
This European Standard covers the complete physical layer (OSI Layer 1), including the interface to the Media Access Control (MAC) sub-layer and the interface to the medium. Parameters that are controlled by other layers but control the operation of the physical layer are also specified.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14908-3:2014(Main)
Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 3: Power Line Channel Specification
SIST EN 14908-3:2014

This European Standard specifies all the information necessary to facilitate the exchange of data and control information over the power line medium for networked control systems in commercial Building Automation, Controls and Building Management.
This European Standard establishes a minimal set of rules for compliance. It does not rule out extended services to be provided, given that the rules are adhered to within the system. It is the intention of the standard to permit extended services (defined by users) to coexist.
Certain aspects of this standard are defined in other documents. These documents are referenced where relevant. In the case where a referenced standard conflicts with this European Standard, this part of EN 14908 will prevail.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14908-1:2014(Main)
Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 1: Protocol Stack
SIST EN 14908-1:2014

This European Standard applies to a communication protocol for networked control systems in commercial Building Automation, Controls and Building Management. The protocol provides peer-to-peer communication for networked control and is suitable for implementing both peer-to-peer and master-slave control strategies. This specification describes services in layers 2 to 7. In the layer 2 (data link layer) specification, it also describes the MAC sub-layer interface to the physical layer. The physical layer provides a choice of transmission media. The interface described in this specification supports multiple transmission media at the physical layer. In the layer 7 specification, it includes a description of the types of messages used by applications to exchange application and network management data.

  • Standard
    415 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14908-4:2014(Main)
Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 4: IP Communication
SIST EN 14908-4:2014

This European Standard specifies the transporting of the Control Network Protocol (CNP) packets for commercial Building Automation, Controls and Building Management over Internet Protocol (IP) networks using a tunnelling mechanism wherein the CNP packets are encapsulated within IP packets. It applies to both CNP nodes and CNP routers.
The purpose of this European Standard is to ensure interoperability between various CNP devices that wish to use IP networks to communicate using the CNP protocol.
The main body of this European Standard is independent of the CNP protocol being transported over the IP network. The reader is directed to Annex A and Annex B for the normative and informative, respectively, aspects of this specification that are specific to EN 14908-1.
Figure 1 shows a possible configuration of such CNP devices and networks connected to an IP network.
Figure 1 depicts two types of CNP devices: CNP nodes and CNP routers. It should be noted that the routers shown can route packets between typical CNP channels (such as twisted pair or power line) and an IP channel or it can route CNP packets between two IP channels. In this European Standard the IP channel will be defined in such a way to allow it to be used like any other CNP channel.
In the above diagram, the IP network can be considered to be one or more IP channels. This European Standard covers only how CNP packets are transported over IP channels. It does not cover how CNP packets are routed between standard CNP channels and IP channels. This specification is not intended to cover the lower layers (physical, MAC and link layers) of either standard CNP or IP channels.

  • Standard
    62 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 16484-1:2010(Main)
Building automation and control systems (BACS) - Part 1: Project specification and implementation (ISO 16484-1:2010)
SIST EN ISO 16484-1:2011

ISO 16484-1:2010 specifies guiding principles for project design and implementation and for the integration of other systems into the building automation and control systems (BACS).
ISO 16484-1:2010 specifies the phases required for the BACS project, including:
design (determination of project requirements and production of design documents including technical specifications),
engineering (detailed function and hardware design),
installation (installing and commissioning of the BACS), and
completion (handover, acceptance and project finalization).
ISO 16484-1:2010 also specifies the requirements for as-built documentation and training.
ISO 16484-1:2010 is not applicable to operation and maintenance, nor is it applicable to retro or continuous commissioning, including a commissioning authority.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14908-5:2009(Main)
Open Data Communication in Building Automation, Controls and Building Management Implementation Guideline - Control Network Protocol - Part 5: Implementation
SIST EN 14908-5:2009

This specification contains all the information necessary to facilitate the exchange of data and control information in an interoperable fashion using EN 14908-1 and its associated data-transport media specifications.
This specification establishes a minimal set of rules for compliance. It does not rule-out extended services to be provided, given that the rules are adhered-to within the system. It is the intention of the standard to permit extended services to coexist and defines the bounds in which those services function, including the format for internal device-documentation of those services. Services outside purvey of this specification so long as they are adherents of the system are permitted but will not necessarily be interoperable with any other devices and shall not be essential for the functioning of the device.
Certain aspects of this standard are defined in other documents. These documents are referenced where relevant. In the case where a referenced standard conflicts with this document, this document will prevail.

  • Standard
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 16484-3:2005(Main)
Building automation and control systems (BACS) - Part 3: Functions (ISO 16484-3:2005)
SIST EN ISO 16484-3:2005

ISO 16484-3:2005 specifies the requirements for the overall functionality and engineering services to achieve building automation and control systems. It defines terms, which shall be used for specifications and it gives guidelines for the functional documentation of project/application specific systems. It provides a sample template for documentation of plant/application specific functions, called BACS points list.
The informative function block examples explain a method to display the referenced functions in system documentation; they do not standardize the method for programming functions and applications.
ISO 16484-3:2005 covers requirements and definitions regarding BACS and application software, generic functions for plant/project specific applications and engineering functions for building controls and operations. It provides communication functions for the integration of other dedicated special system processes.
ISO 16484-3:2005 defines a method for specifying the procurement specifications containing all essential elements required for the operational functioning of a BACS. The successful installation and operation of a BACS requires that its procurement be based on a complete and accurate functional specification.

  • Standard
    83 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    82 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 16484-2:2004(Main)
Building automation and control systems (BACS) - Part 2: Hardware (ISO 16484-2:2004)
SIST EN ISO 16484-2:2004

ISO 16484-2:2004 specifies the requirements for the hardware to perform the tasks within a building automation and control system (BACS). It provides the terms, definitions and abbreviations for the understanding of ISO 16484-2 and ISO 16484-3. ISO 16484-2:2004 relates only to physical items/devices, i.e. devices for management functions, operator stations and other human system interface devices; controllers, automation stations and application specific controllers; field devices and their interfaces; cabling and interconnection of devices; engineering and commissioning tools.
ISO 16484-2:2004 shows a generic system model to which all different types of BACS and their interconnections (BACS network) can fit. A graphical concept of the BACS network in terms of LAN topology will be provided in ISO 16484-5.

  • Standard
    65 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    65 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN ISO 16484-2(Main)
Building Automation and Control Systems (BACS) - Part 2: Hardware
oSIST prEN ISO 16484-2:2016

This European Standard specifies the requirements of hardware and functions for products and systems for the control and management of the HVAC processes (Building Control and Automation System BAC), and provides for the integration of non HVAC processes.

  • Draft
    71 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14908-1:2014(Main)
Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 1: Protocol Stack
SIST EN 14908-1:2014

This European Standard applies to a communication protocol for networked control systems in commercial Building Automation, Controls and Building Management. The protocol provides peer-to-peer communication for networked control and is suitable for implementing both peer-to-peer and master-slave control strategies. This specification describes services in layers 2 to 7. In the layer 2 (data link layer) specification, it also describes the MAC sub-layer interface to the physical layer. The physical layer provides a choice of transmission media. The interface described in this specification supports multiple transmission media at the physical layer. In the layer 7 specification, it includes a description of the types of messages used by applications to exchange application and network management data.

  • Standard
    415 pages
    English language
    sale 10% off
    e-Library read for
    1 day