Wood-based panels - Determination of characteristic 5-percentile values and characteristic mean values

On the basis of test results from wood-based panel products for structural purposes, this European Standard specifies a method for the determination of:
- characteristic 5-percentile values of mechanical properties under the assumption of a log-normal distribution of the test data according to EN 14358; and
- characteristic mean values (50-percentile values) of physical properties under the assumption of a normal distribution of the test data.
Test data should be determined from tests using the test methods outlined in EN 789.

Holzwerkstoffe - Bestimmung der charakteristischen 5-%-Quantilwerte und der charakteristischen Mittelwerte

Dieses Dokument legt ein Berechnungsverfahren auf der Grundlage von Prüfergebnissen von Holzwerkstoffen für tragende Zwecke fest zur Bestimmung von:
-   charakteristischen 5 %-Quantilwerten von mechanischen Eigenschaften unter Annahme einer log-normalen Verteilung der Prüfwerte nach EN 14358; und von
-   charakteristischen Mittelwerten (50 %-Quantilwerte) von physikalischen Eigenschaften unter Annahme einer Normalverteilung der Prüfwerte nach EN 14358.
Die Prüfwerte können aus Prüfungen nach den Prüfverfahren ermittelt werden, die in der Prüfnorm EN 789 oder einer anderen maßgeblichen Prüfnorm, Leistungsnorm oder Produktnorm, die normativ auf prEN 1058 verweist, beschrieben sind.
ANMERKUNG   Siehe z. B. EN 1195 und EN 12871.
Die statistische Evaluierung folgt den Grundsätzen von EN 1990:2002, Anhang D, von EN 1995 1 1:2004, Eurocode 5: Bemessung und Konstruktion von Holzbauten - Teil 1 1: Allgemeines - Allgemeine Regeln und Regeln für den Hochbau und von EN 14358:2016, Holzbauwerke - Berechnung und Kontrolle charakteristischer Werte.

Panneaux à base de bois - Détermination des valeurs caractéristiques correspondant au fractile à 5 % d'exclusion et des valeurs caractéristiques moyennes

Sur la base des résultats des essais des panneaux à base bois à but structurel, le présent document spécifie une méthode pour la détermination :
—   des valeurs caractéristiques des propriétés mécaniques correspondant au fractile à 5 % d'exclusion, en supposant une distribution log-normale des données d'essai conformément à l'EN 14358 ; et
—   des valeurs caractéristiques moyennes des propriétés physiques (valeurs à 50 % d'exclusion) en supposant une distribution normale des données d'essai selon l'EN 14358.
Les résultats d'essai peuvent être déterminés à partir des essais utilisant les méthodes décrites dans l'EN 789 ou toute autre norme applicable, norme de performance ou norme de produit se référant de façon normative au prEN 1058.
NOTE   Voir également l'EN 1195 et l'EN 12871.
L'évaluation statistique suit les principes de l'Annexe D de l'EN 1990:2002, de l'EN 1995 1 1:2004, Eurocode 5 : Conception et calcul des structures en bois — Partie 1-1 : Généralités — Règles générales et règles pour les bâtiments, et de l'EN 14358:2016, Structures en bois. Détermination et vérification des valeurs caractéristiques.

Lesne plošče - Ugotavljanje karakterističnih 5-percentilnih vrednosti in karakterističnih srednjih vrednosti

General Information

Status
Not Published
Publication Date
04-Aug-2025
Current Stage
4060 - Closure of enquiry - Enquiry
Start Date
23-Nov-2023
Due Date
11-Jun-2024
Completion Date
23-Nov-2023

Relations

Buy Standard

Draft
prEN 1058:2023
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 1058:2023
01-november-2023
Lesne plošče - Ugotavljanje karakterističnih 5-percentilnih vrednosti in
karakterističnih srednjih vrednosti
Wood-based panels - Determination of characteristic 5-percentile values and
characteristic mean values
Holzwerkstoffe - Bestimmung der charakteristischen 5-%-Quantilwerte und der
charakteristischen Mittelwerte
Panneaux à base de bois - Détermination des valeurs caractéristiques correspondant au
fractile à 5 % d'exclusion et des valeurs caractéristiques moyennes
Ta slovenski standard je istoveten z: prEN 1058
ICS:
79.060.01 Lesne plošče na splošno Wood-based panels in
general
oSIST prEN 1058:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 1058:2023

---------------------- Page: 2 ----------------------
oSIST prEN 1058:2023


DRAFT
EUROPEAN STANDARD
prEN 1058
NORME EUROPÉENNE

EUROPÄISCHE NORM

August 2023
ICS 79.060.10 Will supersede EN 1058:2009
English Version

Wood-based panels - Determination of characteristic 5-
percentile values and characteristic mean values
Panneaux à base de bois - Détermination des valeurs Holzwerkstoffe - Bestimmung der charakteristischen
caractéristiques correspondant au fractile à 5 % 5-%-Quantilwerte und der charakteristischen
d'exclusion et des valeurs caractéristiques moyennes Mittelwerte
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 112.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 1058:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 1058:2023
prEN 1058:2023 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Symbols . 5
5 Reference population . 5
6 Determination of characteristic values of mechanical and physical properties . 5
6.1 Sampling . 5
6.2 Testing . 6
6.3 Analysis of data . 6
6.3.1 General.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.