EN 1992-2:2005

Eurocode 2 - Design of concrete structures - Concrete bridges - Design and detailing rules

Complementary to Part 1. Varied general rules and additional detailed rules for the structural design of road, rail and footbridges using reinforced and/or prestressed concrete.

Eurocode 2: Bemessung und Konstruktion von Stahlbeton- und Spannbetontragwerken - Teil 2: Betonbrücken - Bemessungs- und Konstruktionsregeln

Anwendungsbereich des Eurocode 2 Teil 2
(101)P  Teil 2 des Eurocode 2 gibt eine Grundlage für die Bemessung und konstruktive Durchbildung von Brücken und Teilen von Brücken aus unbewehrtem Beton sowie Stahl- und Spannbeton, die mit normalen oder leichten Gesteinskörnungen hergestellt werden.
(102)P  Die folgenden Inhalte werden in Teil 2 geregelt:
1:   Allgemeines
2:   Grundlagen für die Tragwerksplanung
3:   Baustoffe
4:   Dauerhaftigkeit und Betondeckung
5:   Ermittlung der Schnittgrößen
6:   Nachweise in den Grenzzuständen der Tragfähigkeit (GZT)
7:   Nachweise in den Grenzzuständen der Gebrauchstauglichkeit (GZG)
8:   Allgemeine Bewehrungsregeln
9:   Konstruktionsregeln
10:   Zusätzliche Regeln für Bauteile und Tragwerke aus Fertigteilen
11:   Zusätzliche Regeln für Tragwerke aus Leichtbeton
12:   Tragwerke aus unbewehrtem oder gering bewehrtem Beton
113:   Bemessung für Bauzustände

Eurocode 2 - Calcul des structures en béton - Partie 2: Ponts en béton - Calcul et dispositions constructives

Evrokod 2: Projektiranje betonskih konstrukcij – 2. del: Betonski mostovi – Projektiranje in pravila za konstruiranje

General Information

• Status: Withdrawn
• Publication Date: 11-Oct-2005
• Withdrawal Date: 21-Nov-2023
• ICS: 91.010.30 - Technical aspects
• ICS: 91.080.40 - Concrete structures
• ICS: 93.040 - Bridge construction
• Technical Committee: CEN/TC 250 - Structural Eurocodes
• Drafting Committee: CEN/TC 250/SC 2 - Eurocode 2: Design of concrete structures
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/265 - Mandate to CEN for the conversion of the Eurocodes from ENV into EN concerning the structural and geotechnical design of buildings and civil engineering works
• Mandate: M/BC/CEN/89/11 - Framework mandate to CEN on Eurocode work : execution of a standardization programme on Eurocodes for the structural design of building and civil engineering works
• Ref Project: SIST EN 1992-2:2005 - Eurocode 2 - Design of concrete structures - Part 2:Concrete bridges - Design and detailing rules

Relations

• Replaces: ENV 1992-2:1996 - Eurocode 2: Design of concrete structures - Part 2: Concrete bridges
• Effective Date: 22-Dec-2008
• Replaced By: EN 1992-1-1:2023 - Eurocode 2 - Design of concrete structures - Part 1-1: General rules and rules for buildings, bridges and civil engineering structures
• Effective Date: 25-Oct-2023
• Corrected By: EN 1992-2:2005/AC:2008 - Eurocode 2 - Design of concrete structures - Concrete bridges - Design and detailing rules
• Effective Date: 22-Dec-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Eurocode 2 - Design of concrete structures - Concrete bridges - Design and detailing rulesEvrokod 2: Projektiranje betonskih konstrukcij – 2. del: Betonski mostovi – Projektiranje in pravila za konstruiranjeEurocode 2 - Calcul des structures en béton - Partie 2: Ponts en béton - Calcul et dispositions constructivesEurocode 2: Bemessung und Konstruktion von Stahlbeton- und Spannbetontragwerken - Teil 2: Betonbrücken - Bemessungs- und KonstruktionsregelnTa slovenski standard je istoveten z:EN 1992-2:2005SIST EN 1992-2:2005en93.040Gradnja mostovBridge construction91.080.40Betonske konstrukcijeConcrete structures91.010.30Technical aspectsICS:SIST ENV 1992-2:20041DGRPHãþDSLOVENSKI
STANDARDSIST EN 1992-2:200501-december-2005







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1992-2October 2005ICS 93.040; 91.010.30; 91.080.40Supersedes ENV 1992-2:1996
English VersionEurocode 2 - Design of concrete structures - Concrete bridges -Design and detailing rulesEurocode 2 - Calcul des structures en béton - Partie 2:Ponts en béton - Calcul et dispositions constructivesEurocode 2 - Planung von Stahlbeton- undSpannbetontragwerken - Teil 2: Betonbrücken - Planungs-und AusführungsregelnThis European Standard was approved by CEN on 25 April 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2005 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1992-2:2005: E



EN 1992-2:2005 (E)2NOTEThis contents list includes sections, clauses and annexes that have been introduced or modified in EN 1992-2.ContentsPageSECTION 1General.71.1Scope.71.1.2Scope of Part 2 of Eurocode 2.71.106Symbols.7SECTION 2Basis of Design.13SECTION 3Materials.133.1Concrete.133.1.2Strength.133.1.6Design compressive and tensile strengths.133.2Reinforcing steel.143.2.4Ductility characteristics.14SECTION 4Durability and cover to reinforcement.154.2Environmental conditions.154.3Requirements for durability.154.4Methods of verifications.154.4.1Concrete cover.
...