EN 54-7:2000/A1:2002

Fire detection and fire alarm systems - Part 7: Smoke detectors - Point detectors using scattered light, transmitted light or ionization

Created exceptionnally without the corresponding TC resolution (at the request of A. Ganesh) - UAP of 4 months (CC/010423)
+++ DOW = DAV + 36 months - accepted by EC  at SCC of 8/9 April 2002 (with EC list n°8 -  doc. Construct 02/529 Rev 1)+++

Brandmeldeanlagen - Teil 7: Rauchmelder - Punktförmige Melder nach dem Streulicht-, Durchlicht- oder Ionisationsprinzip

Systèmes de détection et d'alarme incendie - Partie 7: Détecteurs de fumée - Détecteurs ponctuels fonctionnant suivant le principe de la diffusion de la lumière, de la transmission de la lumière ou de l'ionisation

Sistemi za odkrivanje in javljanje požara ter alarmiranje – 7. del: Dimni javljalniki - Točkovni javljalniki na principu sipanja svetlobe, prepuščene svetlobe ali ionizacije

General Information

• Status: Withdrawn
• Publication Date: 18-Jun-2002
• Withdrawal Date: 28-Aug-2018
• ICS: 13.220.20 - Fire protection
• Technical Committee: CEN/TC 72 - Fire detection and fire alarm systems
• Drafting Committee: CEN/TC 72 - Fire detection and fire alarm systems
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 29-Aug-2018
• Directive: 2014/90/EU - Directive 2014/90/EU of the European Parliament and of the Council of 23 July 2014 on marine equipment and repealing Council Directive 96/98/EC
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Directive: 96/98/EC - Marine equipment
• Mandate: M/109 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on fire alarm/detection, fixed firefighting, fire and smoke control and explosion suppression products
• Ref Project: SIST EN 54-7:2001/A1:2002 - Fire detection and fire alarm systems - Part 7: Smoke detectors - Point detectors using scattered light, transmitted light or ionization

Relations

• Replaced By: EN 54-7:2018 - Fire detection and fire alarm systems - Part 7: Smoke detectors - Point smoke detectors that operate using scattered light, transmitted light or ionization
• Effective Date: 05-Sep-2018
• Amends: EN 54-7:2000 - Fire detection and fire alarm systems - Part 7: Smoke detectors - Point detectors using scattered light, transmitted light or ionization
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
01-december-2002
6LVWHPL]DRGNULYDQMHLQMDYOMDQMHSRåDUDWHUDODUPLUDQMH±GHO'LPQLMDYOMDOQLNL
7RþNRYQLMDYOMDOQLNLQDSULQFLSXVLSDQMDVYHWOREHSUHSXãþHQHVYHWOREHDOL
LRQL]DFLMH
Fire detection and fire alarm systems - Part 7: Smoke detectors - Point detectors using
scattered light, transmitted light or ionization
Brandmeldeanlagen - Teil 7: Rauchmelder - Punktförmige Melder nach dem Streulicht-,
Durchlicht- oder Ionisationsprinzip
Systemes de détection et d'alarme incendie - Partie 7: Détecteurs de fumée - Détecteurs
ponctuels fonctionnant suivant le principe de la diffusion de la lumiere, de la transmission
de la lumiere ou de l'ionisation
Ta slovenski standard je istoveten z: EN 54-7:2000/A1:2002
ICS:
13.220.20 3RåDUQD]DãþLWD Fire protection
13.320 Alarmni in opozorilni sistemi Alarm and warning systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 54-7:2000/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2002
ICS 13.220.20
English version
Fire detection and fire alarm systems - Part 7: Smoke detectors
- Point detectors using scattered light, transmitted light or
ionization
Systèmes de détection et d'alarme incendie - Partie 7: Brandmeldeanlagen - Teil 7: Rauchmelder - Punktförmige
Détecteurs de fumée - Détecteurs ponctuels fonctionnant Melder nach dem Streulicht-, Durchlicht- oder
suivant le principe de la diffusion de la luminère, de la Ionisationsprinzip
transmission de la luminère ou de l'ionisation
This amendment A1 modifies the European Standard EN 54-7:2000; it was approved by CEN on 5 April 2002.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the Management Centre or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2002 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 54-7:2000/A1:2002 E
worldwide for CEN national Members.

Contents
page
Foreword.3
Annex ZA (informative) Clauses of this European Standard addressing essential requirements or other
provisions of EU Directives. .5
Bibliography .11
Foreword
This document EN 54-7:2000/A1:2002 has been prepared by Technical Committee CEN/TC 72 "Fire detection and
fire alarm systems", the secretariat of which is held by BSI.
This Amendment to the European Standard EN 54-7:2000 shall be given the status of a national standard, either
by publication of an identical text or by endorsement, at the latest by December 2002, and conflicting national
standards shall be withdrawn at the latest by June 2005.
This document has been prepared under a mandate given to CEN by the European Commission and the European
Free Trade Association and supports the essential requirements of the EU Construction Products Directive
(89/106/EEC).
For relationships with the EU Construction Products Directive, see informative annex ZA, which is an integral part
of this document.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,
France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain,
Sweden, Switzerland and the United Kingdom.
Contents
At the end of the existing table of contents, insert the following new entries:
Annex ZA (informative) Clauses of this European Standard addressing essential requirements or other
provisions of EU Directives
Bibliography
New annex ZA and Bibliography
After the existing annex M, add annex ZA and Bibliography as follows:
Annex ZA
(informative)
Clauses of this European Standard addressing essential requirements or
other provisions of EU Directives
ZA.1 Scope and relevant clauses
This European Standard has been prepared under the mandate M/109 given to CEN by the European Commission
and the European Free Trade Association.
The clauses of this European Standard, shown in this annex, meet the requirements of the Mandate given under
the EU Construction Products Directive (89/106/EEC).
Compliance with these clauses confers a presumption of fitness of the construction product covered by this
European Standard for its intended use according to clause 1 (Scope) of this standard.
WARNING : Other requirements and other EU Directives may be applicable to the product(s) falling within the
scope of this standard.
NOTE 1  In addition to any specific clauses relating to dangerous substances contained in this standard, there may be other
requirements applicable to the products falling within its scope (e.g. transposed European legislation and national laws,
regulations and administrative provisions). These requirements need also to be complied with, when and where they apply.
NOTE 2  an informative database of European and national provisions on dangerous substances is available at the
Construction web site on EUROPA (CREATE, accessed through
http://europa.eu.int/comm/enterprise/construction/internal/hygiene.thm )
This annex ZA has the same scope, in relation to the products covered, as clause 1 of this standard. This annex
establishes the conditions for the CE marking of point smoke detectors intended for the use shown below and
identifies the relevant clauses applicable.
Construction Product: Smoke detectors - Point detectors using scattered light, transmitted light or
ionization for fire detection and fire alarm systems for buildings.
Intended use: Fire Safety.
Table ZA.1 - Relevant clauses
Essential characteristics Clauses in this Mandated Notes
European Standard level(s)
Nominal activation conditions / Sensitivity, 4.8, 5.2, 5.3, 5.4, 5.6,
Response delay (response time) and 5.7, 5.18
Performance under fire conditions
Operational reliability 4.2 to 4.7, 4.9 to 4.11
Tolerance to supply voltage 5.5
Durability of operational reliability and response 5.8, 5.9 None
delay; temperature resistance
Durability of operational reliability; vibration 5.13 to 5.16
resistance
Durability of operational reliability; humidity 5.10, 5.11
resistance
Durabi
...