EN 14227-10:2006

Hydraulically bound mixtures - Specifications - Part 10: Soil treated by cement

This European Standard specifies soil treated by cement for the pavement layers of roads, airfields and other trafficked areas and specifies the requirements for its constituents, composition and laboratory performance classification. It provides for the use of aggregates with grading curves, which are not constrained by the limits defined in EN 14227-1 for cement bound granular mixtures.
This European Standard does not specify requirements for strength prior to trafficking or frost resistance, which might be covered by requirements at the place of use.
Production control recommendations are included in the informative Annex B.

Hydraulisch gebundene Gemische - Anforderungen - Teil 10: Bodenverbesserung mit Zement

Diese Europäische Norm legt Bodenverbesserungen mit Zement für die Fahrbahndecken von Straßen,
Flugplätzen und sonstigen Verkehrsflächen, die Anforderungen an ihre Bestandteile und Zusammensetzung
und die Klassifizierung des im Labor bestimmten Gebrauchsverhaltens fest. Die Norm regelt die Verwendung
von Gesteinskörnungen mit Körnungslinien, die von den in EN 14227-1 definierten Grenzwerten für
zementgebundene Gemische abweichen.
Diese Europäische Norm enthält keine Anforderungen an die Festigkeit vor dem Befahren oder an die
Frostbeständigkeit, die von Anforderungen am Einsatzort abgedeckt werden könnten.
Der informative Anhang B enthält Empfehlungen zur Produktionskontrolle.

Mélanges traités aux liants hydrauliques - Spécifications - Partie 10: Sol traité au ciment

La présente Norme européenne définit les sols traités au ciment pour les routes, les terrains d’aviation et
autres zones de circulation, et précise les exigences relatives à leurs constituants, à leur composition et à leur
classification selon les performances en laboratoire. Elle convient pour l'utilisation de granulats avec des
courbes granulométriques, qui sortent des limites définies dans EN 14227-1 pour les mélanges granulaires
traités au ciment.
Cette norme ne spécifie pas d'exigences pour la résistance au premier trafic ou la résistance au gel, qui
doivent être conformes aux spécifications du lieu d'utilisation.
Des recommandations pour le contrôle de production sont précisées dans l'Annexe informative B.

Hidravlično vezane zmesi - Specifikacije - 10. del: Izboljšanje zemljin s cementom

General Information

• Status: Withdrawn
• Publication Date: 23-May-2006
• Withdrawal Date: 03-Nov-2015
• ICS: 93.080.20 - Road construction materials
• Technical Committee: CEN/TC 227 - Road materials
• Drafting Committee: CEN/TC 227/WG 4 - Hydraulic bound and unbound mixtures (including byproducts and waste materials)
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 04-Nov-2015
• Ref Project: SIST EN 14227-10:2006 - Hydraulically bound mixtures - Specifications - Part 10: Soil treated by cement

Relations

• Replaced By: EN 14227-15:2015 - Hydraulically bound mixtures - Specifications - Part 15: Hydraulically stabilized soils
• Effective Date: 07-Aug-2013

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Hydraulically bound mixtures - Specifications - Part 10: Soil treated by cementMélanges traités aux liants hydrauliques - Spécifications - Partie 10: Sol traité au cimentHydraulisch gebundene Gemische - Anforderungen - Teil 10: Bodenverbesserung mit ZementTa slovenski standard je istoveten z:EN 14227-10:2006SIST EN 14227-10:2006en93.080.20ICS:SLOVENSKI
STANDARDSIST EN 14227-10:200601-julij-2006







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14227-10May 2006ICS 93.080.20 English VersionHydraulically bound mixtures - Specifications - Part 10: Soiltreated by cementMélanges traités aux liants hydrauliques - Spécifications -Partie 10: Sol traité au cimentHydraulisch gebundene Gemische - Anforderungen - Teil10: Bodenverbesserung mit ZementThis European Standard was approved by CEN on 3 February 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14227-10:2006: E



EN 14227-10:2006 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Terms and definitions.5 4 Symbols and abbreviations.6 5 Constituents.6 5.1 General.6 5.2 Binder.7 5.3 Soil.7 5.4 Water.7 5.5 Secondary constituents.7 6 Mixture.7 6.1 General.7 6.2 Proportioning of the constituents, grading and dry density.7 7 Requirements of the fresh mixture.8 7.1 Water content.8 7.2 Degree of pulverization.8 7.3 Immediate bearing index.8 7.4 Moisture conditi
...