EN 13286-43:2003

Unbound and hydraulically bound mixtures - Part 43: Test method for the determination of the modulus of elasticity of hydraulically bound mixtures

This standard specifies a method for the determination of the modulus of elasticity of test specimens of hydraulically bound mixtures (HBM). The standard applies to specimens made from either laboratory or production mixes with a maximum aggregate size of 31,5 mm. The determination of the modulus is obtained by either of the two following methods: - by compression or in direct tensile test; - by indirect tensile test.

Ungebundene und hydraulisch gebundene Gemische - Teil 43: Prüfverfahren zur Bestimmung des Elastizitätsmoduls hydraulaulisch gebundener Gemische

Diese Europäische Norm beschreibt ein Prüfverfahren zur Bestimmung des Elastizitätsmoduls von Probekörpern aus hydraulisch gebundenen Gemischen. Die Europäische Norm gilt für Probekörper, die entweder im Labor oder aus Bohrkernen hergestellt werden.
Die Bestimmung des Moduls erfolgt nach einem der beiden folgenden Verfahren:
   dem Druck- oder direkten Zugversuch;
   dem direkten Zugversuch; oder
   dem indirekten Zugversuch.

Mélanges traités et mélanges non traités aux liants hydraulique - Partie 43: Méthode d'essai pour la détermination du module d'élasticité des mélanges traités aux liants hydrauliques

La présente norme Norme européenne européenne spécifie une méthode d'essai de détermination du module d'élasticité d'éprouvettes de graves mélanges traités aux liants hydrauliques. La présente norme Norme européenne Européenne s'applique à des éprouvettes confectionnées en laboratoire ou préparées à partir de carottes.
Le module est déterminé en utilisant :
   l'essai de compression ;
   l'essai de traction directe ; ou
   l'essai de traction indirecte.

Nevezane in hidravlično vezane zmesi – 43. del: Preskusna metoda za ugotavljanje modula elastičnosti hidravlično vezanih zmesi

General Information

• Status: Published
• Publication Date: 04-Mar-2003
• Withdrawal Date: 30-Dec-2004
• ICS: 93.080.20 - Road construction materials
• Technical Committee: CEN/TC 227 - Road materials
• Drafting Committee: CEN/TC 227/WG 4 - Hydraulic bound and unbound mixtures (including byproducts and waste materials)
• Current Stage: 9060 - Closure of 2 Year Review Enquiry - Review Enquiry
• Start Date: 02-Sep-2023
• Completion Date: 02-Sep-2023
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Ref Project: SIST EN 13286-43:2004 - Unbound and hydraulically bound mixtures - Part 43: Test method for the determination of the modulus of elasticity of hydraulically bound mixtures

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Ungebundene und hydraulisch gebundene Gemische - Teil 43: Prüfverfahren zur Bestimmung des Elastizitätsmoduls hydraulaulisch gebundener GemischeMélanges traités et mélanges non traités aux liants hydraulique - Partie 43: Méthode d'essai pour la détermination du module d'élasticité des mélanges traités aux liants hydrauliquesUnbound and hydraulically bound mixtures - Part 43: Test method for the determination of the modulus of elasticity of hydraulically bound mixtures93.080.20Materiali za gradnjo cestRoad construction materialsICS:Ta slovenski standard je istoveten z:EN 13286-43:2003SIST EN 13286-43:2004en01-junij-2004SIST EN 13286-43:2004SLOVENSKI
STANDARD



SIST EN 13286-43:2004



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13286-43March 2003ICS 93.080.20English versionUnbound and hydraulically bound mixtures - Part 43: Testmethod for the determination of the modulus of elasticity ofhydraulically bound mixturesMélanges traités et mélanges non traités aux liantshydraulique - Partie 43: Méthode d'essai pour ladétermination du module d'élasticité des graves traités auxliants hydrauliquesUngebundene und hydraulisch gebundene Gemische - Teil43: Prüfverfahren zur Bestimmung des Elastizitätsmodulshydrauliaulisch gebundener GemischeThis European Standard was approved by CEN on 29 November 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovak Republic, Spain, Sweden, Switzerland andUnited Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13286-43:2003 ESIST EN 13286-43:2004



EN 13286-43:2003 (E)2ContentspageForeword.31Scope.52Normative references.53Terms and definitions.54Determination of the modulus of elasticity by compression or by direct tensile test.54.1Principle.54.2Apparatus.64.2.1Testing machine.64.2.2Strain measuring device.64.3Preparation of the test specimen.84.4Test procedure.84.4.1Position of the strain measuring device on the specimen.84.4.2Positioning the specimen on the test machine and loading.84.5Data recording and calculation of the elastic modulus.85Determination of the modulus of elasticity by indirect tensile test.95.1Principle.
...