EN 13286-42:2003

Unbound and hydraulically bound mixtures - Part 42: Test method for the determination of the indirect tensile strength of hydraulically bound mixtures

This standard specifies a method for the determination of the indirect tensile strength of test specimens of hydraulically bound mixtures (HBM). The standard applies to specimens made from either laboratory or production mixes with a maximum aggregate size of 31,5 mm.

Ungebundene und hydraulisch gebundene Gemische - Teil 42: Prüfverfahren zur Bestimmung der Zugfestigkeit hydraulisch gebundener Gemische im indirekten Zugversuch

Diese Europäische Norm beschreibt ein Prüfverfahren zur Bestimmung der Zugfestigkeit von zylindrischen Probekörpern aus hydraulisch gebundenen Gemischen im indirekten Zugversuch. Diese Europäische Norm gilt für Probekörper, die entweder im Labor oder aus Bohrkernen hergestellt werden.

Mélanges traités et mélanges non traités aux liants hydraulique - Partie 42: Méthode d'essai pour la détermination de la résistance à la traction indirecte des mélanges traités aux liants hydrauliques

La présente norme Norme Européenne spécifie une méthode d'essai pour la détermination de la résistance à la traction indirecte d'éprouvettes cylindriques de mélanges traités aux liants hydrauliques. La présente Norme européenne s'applique à des éprouvettes confectionnées en laboratoire ou préparées à partir de carottes.

Nevezane in hidravlično vezane zmesi – 42. del: Preskusna metoda za ugotavljanje posredne natezne trdnosti hidravlično vezanih zmesi

General Information

• Status: Published
• Publication Date: 04-Mar-2003
• Withdrawal Date: 30-Dec-2004
• ICS: 93.080.20 - Road construction materials
• Technical Committee: CEN/TC 227 - Road materials
• Drafting Committee: CEN/TC 227/WG 4 - Hydraulic bound and unbound mixtures (including byproducts and waste materials)
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 26-Jul-2024
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Ref Project: SIST EN 13286-42:2004 - Unbound and hydraulically bound mixtures - Part 42: Test method for the determination of the indirect tensile strength of hydraulically bound mixtures

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Ungebundene und hydraulisch gebundene Gemische - Teil 42: Prüfverfahren zur Bestimmung der Zugfestigkeit hydraulisch gebundener Gemische im indirekten ZugversuchMélanges traités et mélanges non traités aux liants hydraulique - Partie 42: Méthode d'essai pour la détermination de la résistance a la traction indirecte des mélanges traités aux liants hydrauliquesUnbound and hydraulically bound mixtures - Part 42: Test method for the determination of the indirect tensile strength of hydraulically bound mixtures93.080.20Materiali za gradnjo cestRoad construction materialsICS:Ta slovenski standard je istoveten z:EN 13286-42:2003SIST EN 13286-42:2004en01-junij-2004SIST EN 13286-42:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13286-42March 2003ICS 93.080.20English versionUnbound and hydraulically bound mixtures - Part 42: Testmethod for the determination of the indirect tensile strength ofhydraulically bound mixturesMélanges traités et mélanges non traités aux liantshydraulique - Partie 42: Méthode d'essai pour ladétermination de la résistance à la traction indirecte desmélanges traités aux liants hydrauliquesUngebundene und hydraulisch gebundene Gemische - Teil42: Prüfverfahren zur Bestimmung der Zugfestigkeithydraulisch gebundenen Gemischen im indirektenZugversuchThis European Standard was approved by CEN on 29 November 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovak Republic, Spain, Sweden, Switzerland andUnited Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13286-42:2003 ESIST EN 13286-42:2004
...