EN ISO 14678:2005

Adhesives - Determination of resistance to flow (sagging) (ISO 14678:2005)

ISO 14678:2005 describes seven methods for the assessment of the flow characteristics of adhesives after application at room temperature and during cure, by the measurement of sagging. These methods may be used both for specifying an adhesive and for quality control purposes.

Klebstoffe - Bestimmung des Widerstandes gegen Fließen (Sagging) (ISO 14678:2005)

Diese Europäische Norm beschreibt sieben Verfahren zur Erfassung des Fließcharakters von Klebstoffen nach ihrem Auftragen bei Raumtemperatur oder während ihrer Vernetzung durch Messung des Absinkens. Diese Verfahren können sowohl zur Spezifikation eines Klebstoffes als auch zur Qualitätskontrolle angewandt werden.

Adhésifs - Détermination de la résistance au fluage (coulure) (ISO 14678:2005)

L'ISO 14678:2005 décrit sept méthodes pour évaluer les caractéristiques de fluage des adhésifs en mesurant la coulure après leur application à température ambiante et pendant le durcissement. Ces méthodes peuvent être utilisées à la fois pour le choix des adhésifs et pour les contrôles de qualité.

Lepila – Določanje odpornosti proti tečenju (polzenju) ISO 14678:2005)

General Information

• Status: Published
• Publication Date: 14-Aug-2005
• Withdrawal Date: 27-Feb-2006
• ICS: 83.180 - Adhesives
• Technical Committee: CEN/TC 193 - Adhesives
• Drafting Committee: CEN/TC 193/WG 1 - General terminology - General physical and chemical tests
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 15-Aug-2005
• Completion Date: 15-Aug-2005
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/127 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on construction adhesives
• Ref Project: SIST EN ISO 14678:2006 - Adhesives - Determination of resistance to flow (sagging) (ISO 14678:2005)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 14678:2006
01-januar-2006
/HSLOD±'RORþDQMHRGSRUQRVWLSURWLWHþHQMXSRO]HQMX,62
Adhesives - Determination of resistance to flow (sagging) (ISO 14678:2005)
Klebstoffe - Bestimmung des Widerstandes gegen Fließen (Sagging) (ISO 14678:2005)
Adhésifs - Détermination de la résistance au fluage (coulure) (ISO 14678:2005)
Ta slovenski standard je istoveten z: EN ISO 14678:2005
ICS:
83.180 Lepila Adhesives
SIST EN ISO 14678:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 14678:2006

---------------------- Page: 2 ----------------------

SIST EN ISO 14678:2006
EUROPEAN STANDARD
EN ISO 14678
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2005
ICS 83.180
English version
Adhesives - Determination of resistance to flow (sagging) (ISO
14678:2005)
Adhésifs - Détermination de la résistance au fluage Klebstoffe - Bestimmung des Widerstandes gegen Fließen
(coulure) (ISO 14678:2005) (Sagging) (ISO 14678:2005)
This European Standard was approved by CEN on 29 April 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 14678:2005: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 14678:2006
EN ISO 14678:2005 (E)
Contents
Page
Foreword.3
1 Scope .5
2 Normative references .5
3 Terms and definitions .5
4 Guidance: Typical applications for the seven test methods are as follows: .6
5 Sampling.6
6 Safety .6
7 Method 1: Use of an applicator to apply a wet film.6
8 Method 2: Use of a plug former.10
9 Method 3: Use of a scraper.15
10 Method 4: Use of test blocks .17
11 Method 5: Flow from a lap joint.21
12 Method 6: Flow of adhesive through a hole.24
13 Method 7: Flow of structural adhesive films.25

2

---------------------- Page: 4 ----------------------

SIST EN ISO 14678:2006
EN ISO 14678:2005 (E)
Foreword
This European Standard (EN ISO 14678:2005) has been prepared by Technical Committee CEN/TC 193
"Adhesives", the secretariat of which is held by AENOR, in collaboration with Technical Co
...