EN ISO 20568-2:2017
(Main)Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 20568-2:2017)
Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 20568-2:2017)
ISO 20568-2:2017 describes the preparation of test specimens and provides test methods to define characteristics of thermoplastic fluoropolymer resins. Results from the testing can be used as the basis for designation, material specifications or both.
Kunststoffe - Fluorpolymerdispersionen, Formmassen und Extrusionswerkstoffe - Teil 2: Herstellung von Probekörpern und Bestimmung von Eigenschaften (ISO 20568-2:2017)
Dieses Dokument beschreibt die Herstellung von Probekörpern und bietet Prüfverfahren zum Festlegen von Merkmalen von thermoplastischen Fluorpolymerharzen. Die Prüfergebnisse können als Grundlage für die Bezeichnung und Materialspezifikationen oder für beides dienen.
Plastiques - Polymères fluorés: dispersions et matériaux pour moulage et extrusion - Partie 2: Préparation des éprouvettes et détermination des propriétés (ISO 20568-2:2017)
ISO 20568-2:2017 décrit la préparation des éprouvettes et indique les méthodes d'essai à utiliser pour définir les caractéristiques des résines thermoplastiques de polymères fluorés. Les résultats d'essai peuvent être utilisés comme base pour la désignation et/ou la spécification de la matière.
Polimerni materiali - Disperzije in materiali za oblikovanje in ekstrudiranje na osnovi fluoropolimerov - 2. del: Priprava preskušancev in določanje lastnosti (ISO 20568-2:2017)
Ta dokument opisuje pripravo preskušancev in določa preskusne metode za določanje
lastnosti plastomernih fluoropolimernih smol. Rezultati preskušanja se lahko uporabijo kot podlaga za označevanje, specifikacije materialov ali oboje.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2017
1DGRPHãþD
SIST EN ISO 12086-2:2006
SIST EN ISO 12086-2:2006/AC:2009
3ROLPHUQLPDWHULDOL'LVSHU]LMHLQPDWHULDOL]DREOLNRYDQMHLQHNVWUXGLUDQMHQD
RVQRYLIOXRURSROLPHURYGHO3ULSUDYDSUHVNXãDQFHYLQGRORþDQMHODVWQRVWL,62
Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 2:
Preparation of test specimens and determination of properties (ISO 20568-2:2017)
Kunststoffe - Fluorpolymerdispersionen, Formmassen und Extrusionsmaterialien - Teil 2:
Herstellung von Probekörpern und Bestimmung von Eigenschaften (ISO 20568-2:2017)
Plastiques - Polymères fluorés: dispersions et matériaux pour moulage et extrusion -
Partie 2 : Préparation des éprouvettes et détermination des propriétés (ISO 20568-
2:2017)
Ta slovenski standard je istoveten z: EN ISO 20568-2:2017
ICS:
83.080.20 Plastomeri Thermoplastic materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 20568-2
EUROPEAN STANDARD
NORME EUROPÉENNE
June 2017
EUROPÄISCHE NORM
ICS 83.080.20 Supersedes EN ISO 12086-2:2006
English Version
Plastics - Fluoropolymer dispersions and moulding and
extrusion materials - Part 2: Preparation of test specimens
and determination of properties (ISO 20568-2:2017)
Plastiques - Polymères fluorés: dispersions et Kunststoffe - Fluorpolymerdispersionen, Formmassen
matériaux pour moulage et extrusion - Partie 2: und Extrusionsmaterialien - Teil 2: Herstellung von
Préparation des éprouvettes et détermination des Probekörpern und Bestimmung von Eigenschaften
propriétés (ISO 20568-2:2017) (ISO 20568-2:2017)
This European Standard was approved by CEN on 29 April 2017.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 20568-2:2017 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 20568-2:2017) has been prepared by Technical Committee ISO/TC 61 "Plastics"
in collaboration with Technical Committee CEN/TC 249 “Plastics” the secretariat of which is held by
NBN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by December 2017 and conflicting national standards
shall be withdrawn at the latest by December 2017.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes EN ISO 12086-2:2006.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 20568-2:2017 has been approved by CEN as EN ISO 20568-2:2017 without any
modification.
INTERNATIONAL ISO
STANDARD 20568-2
First edition
2017-05
Plastics — Fluoropolymer dispersions
and moulding and extrusion
materials —
Part 2:
Preparation of test specimens and
determination of properties
Plastiques — Polymères fluorés: dispersions et matériaux pour
moulage et extrusion —
Partie 2: Préparation des éprouvettes et détermination des propriétés
Reference number
ISO 20568-2:2017(E)
©
ISO 2017
ISO 20568-2:2017(E)
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2017 – All rights reserved
ISO 20568-2:2017(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Preparation of test specimens . 2
5 Conditioning and test conditions . 2
6 Determination of properties . 2
7 Testing of PTFE . 2
7.1 Testing of polytetrafluoroethylene (PTFE) granular moulding and ram extrusion
materials, and for PTFE resin produced from coagulation of dispersion . 2
7.1.1 Standard specific gravity (SSG) . 2
7.1.2 Bulk density . 4
7.1.3 Particle size and size distribution . 8
7.2 Testing of polytetrafluoroethylene (PTFE) dispersion .15
7.2.1 Preparation of test samples .15
7.2.2 Percentage PTFE and surfactant in aqueous dispersion .15
8 Testing of melt processable fluoropolymers .16
8.1 Testing of CPT, ECTFE, EFEP, ETFE, FEP, PFA, PVDF, PVF, VDF/CTFE, VDF/HFP,
VDF/TFE, VDF/TFE/HFP .16
8.1.1 Melting-peak temperature .16
8.1.2 Melt mass-flow rate (MFR) .16
8.2 Testing of PCTFE .18
8.2.1 Zero-strength time .18
8.3 Testing of TFE/PDD .18
8.3.1 Glass transition temperature .18
8.4 Testing of melt processable fluoropolymers dispersion .19
Bibliography .20
ISO 20568-2:2017(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see http:// www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO’s adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following
URL: w w w . i s o .org/ iso/ foreword .html.
This document was prepared by Technical Committee ISO/TC 61, Plastics, Subcommittee SC 9,
Thermoplastic materials.
This first edition of ISO 20568-2 cancels and replaces ISO 12086-2:2006, which has been technically
revised.
A list of all parts in the ISO 20568 series can be found on the ISO website.
iv © ISO 2017 – All rights reserved
INTERNATIONAL STANDARD ISO 20568-2:2017(E)
Plastics — Fluoropolymer dispersions and moulding and
extrusion materials —
Part 2:
Preparation of test specimens and determination of
properties
SAFETY STATEMENT — Persons using this document should be familiar with normal laboratory
practice, if applicable. This document does not purport to address all of the safety concerns, if
any, associated with its use. It is the responsibility of the user to establish appropriate safety
and health practices and to ensure compliance with any regulatory requirements. The warnings
in 7.1.1.4 and 7.1.3.1 point out specific hazards.
1 Scope
This document describes the preparation of test specimens and provides test methods to define
characteristics of thermoplastic fluoropolymer resins. Results from the testing can be used as the basis
for designation, material specifications or both.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.