EN 1010-1:2004
(Main)Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements
Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements
5
1.1 This document applies to
.printing machines for printing on paper and similar materials, including screen printing presses;
equipment used in the preparation of the printing process and additional equipment on printing machines
are also considered to be printing machines. This standard also covers machinery used for the handling
of paper, products, printing formes and inks (before and after the printing process) as well as machinery
for cleaning printing formes and checking the print quality (auxiliary printing machinery).
.paper converting machines, i. e. machines to process, convert or finish paper, board and similar materials
which are processed, converted or finished in a similar manner.
NOTE Similar substrates are, for example, board, corrugated board, plastic film, aluminium foil, sheet metal and
photographic paper.
1.2 This document deals with all common significant hazards relevant to printing and paper converting
machinery when they are used as intended and under the conditions foreseen by the manufacturer (see
clause 4). This part of the standard defines the common safety requirements for all kinds of printing and paper
converting machines and related common devices and shall be used in connection with another part of the
EN 1010 series. The specific requirements specified in Part 2 and following parts of EN 1010 take precedence
over the respective requirements in EN 1010-1.
NOTE In addition, where a machine is not covered by a specific part of this standard, Part 1 of EN 1010 may be used
to establish the approach for dealing with the relevant risks.
1.3 This document is not applicable to printing and paper converting machines which are manufactured
before the date of publication of this document by CEN..EN 1010-1:2004 (E)
Sicherheit von Maschinen - Sicherheitsanforderungen an Konstruktion und Bau von Druck- und Papierverarbeitungsmaschinen - Teil 1: Gemeinsame Anforderungen
Diese Norm gilt: 1.1.1 für Druckmaschinen zum Drucken auf Papier und ähnlichn Stoffen (Rolle, Bogen, körperförmige Bedruckstoffe); als Druckmaschinen gelten auch Einrichtungen und Arbeitsmittel zur Druckformherstellung.
Sécurité des machines - Prescriptions de sécurité pour la conception et la construction de machines d'impression et de transformation du papier - Partie 1: Prescriptions communes
1.1 Le présent document s'applique aux :
machines d'impression, c'est-à-dire les machines imprimant sur papier ou matières similaires, y compris les machines d'impression sérigraphique ; le matériel utilisé pour la préparation du procédé d'impression et le matériel auxiliaire des machines d'impression sont également considérés au titre de machines d'impression. La présente norme s'applique également aux machines utilisées pour la manutention du papier, des produits, des formes d'impression ou des encres (avant et après le processus d'impression), de même qu'aux machines destinées au lavage des formes d'impression et au contrôle de la qualité d'impression (machines d'impression auxiliaires) ;
machines de transformation du papier qui préparent, transforment et finissent le papier, le carton et d'autres matières similaires qui sont préparées, transformées et finies de la même manière (machine de traitement du papier, machine de finition du papier).
NOTE Les matières similaires sont par exemple le carton et le carton ondulé, les films en matière plastique ou en aluminium, la tôle mince et le papier photographique.
1.2 Le présent document traite tous les phénomènes dangereux communs significatifs engendrés par les machines d'impression et de transformation du papier lorsqu'elles sont utilisées normalement et dans les conditions prévues par le constructeur (voir Article 4). La présente partie 1 de la norme définit les prescriptions de sécurité communes à tous les types de machines d'impression et de transformation du papier ainsi que leurs auxiliaires communs. Elle doit être utilisée avec une autre partie de la série de l'EN 1010. Les prescriptions spécifiques prescrites dans les parties 2 et suivantes de l'EN 1010 ont la priorité sur les prescriptions respectives de l'EN 1010-1.
NOTE En outre, la partie 1 de l'EN 1010 peut être appliquée dans les cas où une machine n'entre pas dans le domaine d'application d'une partie spécifique de la présente norme et si un phén
Varnost strojev - Varnostne zahteve za načrtovanje in konstrukcijo tiskarskih strojev in strojev za obdelavo papirja - 1. del: Splošne zahteve
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirementsSécurité des machines - Prescriptions de sécurité pour la conception et la construction de machines d'impression et de transformation du papier - Partie 1: Prescriptions communesSicherheit von Maschinen - Sicherheitsanforderungen an Konstruktion und Bau von Druck- und Papierverarbeitungsmaschinen - Teil 1: Gemeinsame Anforderungen85.100Oprema za papirno industrijoEquipment for the paper industry37.100.10Reprodukcijska opremaReproduction equipmentICS:SIST EN 1010-1:2005enTa slovenski standard je istoveten z:EN 1010-1:200401-april-2005SIST EN 1010-1:2005SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1010-1December 2004ICS 37.100.10; 85.100English versionSafety of machinery - Safety requirements for the design andconstruction of printing and paper converting machines - Part 1:Common requirementsSécurité des machines - Prescriptions de sécurité pour laconception et la construction de machines d'impression etde transformation du papier - Partie 1: PrescriptionscommunesSicherheit von Maschinen - Sicherheitsanforderungen anKonstruktion und Bau von Druck- undPapierverarbeitungsmaschinen - Teil 1: GemeinsameAnforderungenThis European Standard was approved by CEN on 7 June 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1010-1:2004: E
Classification of zones for printing presses and finishing machines
(relating to 5.2.4).39 Annex B (normative)
Audible prestart warning devices.42 Annex C (informative)
Risk analysis relating to the pitch angle of access stairs.44 Annex D (informative)
Example of layout of an instruction handbook.46 Annex ZA (informative)
Relationship between this European Standard and the
Essential Requirements of
EU Directive 98/37/EC.48
Relationship between this
European
Standard and the Essential Requirements
of EU Directive 94/9/EC.49 Bibliography.51
Common requirements Part 2
Printing and varnishing machines including pre-press machinery Part 3
Cutting machines Part 4
Bookbinding, paper converting and finishing machines Part 5
Machines for the production of corrugated board and machines for the conversion of flat and corrugated board. 1 Scope 1.1 This document applies to printing machines for printing on paper and similar materials, including screen printing presses; equipment used in the preparation of the printing process and additional equipment on printing machines are also considered to be printing machines. This standard also covers machinery used for the handling of paper, products, printing formes and inks (before and after the printing process) as well as machinery for cleaning printing formes and checking the print quality (auxiliary printing machinery). paper converting machines, i. e. machines to process, convert or finish paper, board and similar materials which are processed, converted or finished in a similar manner. NOTE Similar substrates are, for example, board, corrugated board, plastic film, aluminium foil, sheet metal and photographic paper. 1.2 This document deals with all common significant hazards relevant to printing and paper converting machinery when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4). This part of the standard defines the common safety requirements for all kinds of printing and paper converting machines and related common devices and shall be used in connection with another part of the EN 1010 series. The specific requirements specified in Part 2 and following parts of EN 1010 take precedence over the respective requirements in EN 1010-1. NOTE In addition, where a machine is not covered by a specific part of this standard, Part 1 of EN 1010 may be used to establish the approach for dealing with the relevant risks. 1.3 This document is not applicable to printing and paper converting machines which are manufactured before the date of publication of this document by CEN.
1.4 This document does not apply to: winder-slitters and sheeters in paper finishing (sheeters with unwinders) (see EN 1034-1:2000, EN 1034-3:2000, prEN 1034-5:2001); office-type collating machines equipped with friction feeders; mail processing machines; machines used for filling packages (such as machines for shaping, filling, and closing the package), textile printing presses 2 Normative references The following referenced documents are indispensable for the application of this document.
For dated references, only the edition cited applies.
For undated references, the latest edition of the referenced document (including any amendments) applies. EN 294:1992, Safety of machinery — Safety distances to prevent danger zones being reached by the upper limbs. EN 349:1993, Safety of machinery — Minimum gaps to avoid crushing of parts of the human body. EN 418:1992, Safety of machinery — Emergency stop equipment, functional aspects — Principles for design. EN 563:1994, Safety of machinery — Temperatures of touchable surfaces — Ergonomics data to establish temperature limit values for hot surfaces. EN 574:1996, Safety of machinery — Two-hand control devices — Functional aspects — Principles for design. EN 953:1997, Safety of machinery — Guards — General requirements for the design and construction of fixed and movable guards. EN 954-1:1996, Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design. EN 999:1998, Safety of machinery — The positioning of protective equipment in respect of approach speeds of parts for the human body. EN 1037:1995, Safety of machinery — Prevention of unexpected start-up. EN 1050:1996, Safety of machinery — Principles for risk assessment. EN 1070:1998, Safety of machinery —
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.