Plastics - Epoxy resins - Part 2: Preparation of test specimens and determination of properties (ISO 3673-2:1999)

Kunststoffe - Epoxidharze - Teil 2: Herstellung von Pröbekorpern und Bestimmung von Eigenschaften (ISO 3673-2:1999)

Dieser Teil von ISO 3673 legt die Verfahren und Bedingungen für die Herstellung von Probekörpern eines Epoxidharzes unter festgelegten Bedingungen fest und die Verfahren zur Messung seiner Eigenschaften. Vorschriften zur Handhabung des Prüfmaterials und zur Konditionierung sowohl des Prüfmaterials vor der Verarbeitung als eine der Prüfkörper werden gegeben. Für vernetzte Epoxidharze wurden die Eigenschaften aus den allgemeinen Prüfverfahren in ISO 10350:1993 ausgewählt.

Plastiques - Résines époxydes - Partie 2: Préparation des éprouvettes et détermination des propriétés (ISO 3673-2:1999)

La présente partie de l'ISO 3673 spécifie les méthodes de préparation des éprouvettes et les méthodes d'essai à appliquer pour déterminer les propriétés des résines époxydes. Elle fixe les exigences concernant, d'une part, le traitement du matériau pour essai, et d'autre part, le conditionnement des éprouvettes avant les essais.Les propriétés des résines époxydes réticulées ont été choisies parmi les méthodes d'essai générales de l'ISO 10350:1993. D'autres méthodes d'essai largement utilisées pour caractériser ces résines époxydes ou présentant une importance particulière (en particulier, les propriétés utiles pour la mise en oeuvre des résines EP non réticulées) sont également incluses dans la présente partie de l'ISO 3673.Pour obtenir des résultats d'essai reproductibles et comparables, il est nécessaire d'appliquer les spécifications du présent document en ce qui concerne les méthodes d'essai, la préparation et le conditionnement des échantillons, les éprouvettes et leurs dimensions. Les valeurs déterminées ne seront pas nécessairement identiques à celles obtenues en utilisant des éprouvettes ayant d'autres dimensions ou préparées selon d'autres modes opératoires.Il existe d'autres normes relatives à la «détermination des propriétés et à la préparation des éprouvettes» de produits à base d'époxyde auxquelles il sera fait référence, si nécessaire.

Polimerni materiali - Epoksidne smole - 2. del: Priprava preskušancev in ugotavljanje lastnosti (ISO 3673-2:1999)

General Information

Status
Withdrawn
Publication Date
14-Dec-1999
Withdrawal Date
14-Jul-2012
Technical Committee
Drafting Committee
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
15-Jul-2012
Completion Date
15-Jul-2012

Relations

Buy Standard

Standard
EN ISO 3673-2:2000
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 3673-2:2000
01-december-2000
Polimerni materiali - Epoksidne smole - 2. del: Priprava preskušancev in
ugotavljanje lastnosti (ISO 3673-2:1999)
Plastics - Epoxy resins - Part 2: Preparation of test specimens and determination of
properties (ISO 3673-2:1999)
Kunststoffe - Epoxidharze - Teil 2: Herstellung von Pröbekorpern und Bestimmung von
Eigenschaften (ISO 3673-2:1999)
Plastiques - Résines époxydes - Partie 2: Préparation des éprouvettes et détermination
des propriétés (ISO 3673-2:1999)
Ta slovenski standard je istoveten z: EN ISO 3673-2:1999
ICS:
83.080.10 Duromeri Thermosetting materials
SIST EN ISO 3673-2:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 3673-2:2000

---------------------- Page: 2 ----------------------

SIST EN ISO 3673-2:2000

---------------------- Page: 3 ----------------------

SIST EN ISO 3673-2:2000

---------------------- Page: 4 ----------------------

SIST EN ISO 3673-2:2000

---------------------- Page: 5 ----------------------

SIST EN ISO 3673-2:2000

---------------------- Page: 6 ----------------------

SIST EN ISO 3673-2:2000
INTERNATIONAL ISO
STANDARD 3673-2
First edition
1999-12-15
Plastics — Epoxy resins —
Part 2:
Preparation of test specimens and
determination of properties
Plastiques — Résines époxydes —
Partie 2: Préparation des éprouvettes et détermination des propriétés
Reference number
ISO 3673-2:1999(E)
©
ISO 1999

---------------------- Page: 7 ----------------------

SIST EN ISO 3673-2:2000
ISO 3673-2:1999(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not
be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this
file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this
area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters
were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event
that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 1999
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic
or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body
in the country of the requester.
ISO copyright office
Case postale 56 � CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 734 10 79
E-mail copyright@iso.ch
Web www.iso.ch
Printed in Switzerland
ii © ISO 1999 – All rights reserved

---------------------- Page: 8 ----------------------

SIST EN ISO 3673-2:2000
ISO 3673-2:1999(E)
Contents
Foreword.iv
Introduction.v
1 Scope .1
2 Normative references .1
3 Preparation of test specimens .3
3.1 General.3
3.2 Pretreatment of materials .4
3.3 Preparation of test sheets.4
3.4 Cutting out test specimens.5
3.5 Conditioning test specimens.6
4 Determination of properties.6
© ISO 199
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.