EN 14933:2007
(Main)Thermal insulation and light weight fill products for civil engineering applications - Factory made products of expanded polystyrene (EPS) - Specification
Thermal insulation and light weight fill products for civil engineering applications - Factory made products of expanded polystyrene (EPS) - Specification
This European Standard specifies the requirements for factory made products of expanded polystyrene which are used for frost insulation of roads, railways, trafficked areas, light weight fill for reduction of horizontal and vertical earth pressure and other civil engineering applications.
The products are manufactured in the form of boards or blocks. The standard also covers specially cut shaped boards or blocks.
The standard describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling.
The standard does not specify the required class or level of a given property to be achieved by a product to demonstrate fitness for purpose in a particular application. The classes and levels required for a given application are to be found in regulations or non-conflicting standards.
For applications where thermal resistance is required, products with a declared thermal resistance lower than 0,25 m²K/W or a declared thermal conductivity greater than 0,060 W/(m K) are not covered by this standard. This standard does not cover in situ insulation products and products intended to be used for the insulation of buildings, of building equipment and industrial installations or products intended for acoustic insulation.
Wärmedämmung und leichte Füllprodukte für Anwendungen im Tiefbau - Werkmäßig hergestellte Produkte aus expandiertem Polystyrol (EPS) - Spezifikation
Diese Europäische Norm legt die Anforderungen für werkmäßig hergestellte Produkte aus expandiertem Polystyrol fest, die für die Dämmung von Straßen, Gleisen und Verkehrsflächen gegen Frost, als Leichtaufschüttungen zur Verringerung des horizontalen und vertikalen Erddrucks sowie für weitere Anwendungen im Tiefbau verwendet werden.
Die Produkte werden in der Form von Platten und Blöcken hergestellt. Die Norm behandelt auch besonders geformte Platten und Blöcke.
Diese Norm beschreibt die Stoffeigenschaften und enthält die Prüfverfahren und Festlegungen für die Konformitätsbewertung, die Kennzeichnung und die Etikettierung.
Diese Norm legt keine Leistungsklassen oder -stufen für eine vorgegebene Eigenschaft fest, die ein Produkt erreichen muss, um für einen bestimmten Anwendungsfall tauglich zu sein. Für bestimmte Anwendungen benötigte Klassen und Stufen können Regelwerken oder nicht entgegenstehenden Normen entnommen werden.
Diese Norm gilt nicht für Produkte, deren Nennwert des Wärmedurchlasswiderstandes geringer ist als 0,25 m2 K/W Nennwert oder deren Nennwert der Wärmeleitfähigkeit größer ist als 0,060 W/(m K) bei 10 °C. Diese Norm gilt nicht für an der Verwendungsstelle hergestellte Produkte und Produkte, die zur Dämmung für Gebäude, die Haustechnik und betriebstechnische Anlagen oder Produkte, die für die Schalldämmung bestimmt sind.
Produits isolants thermiques et de remblayage pour les applications de génie civil - Produits manufacturés en polystyrène expansé (EPS) - Spécification
La présente Norme européenne spécifie les exigences auxquelles doivent satisfaire les exigences des produits manufacturés en polystyrène expansé utilisés pour l'isolation thermique des routes, des chemins de fer, des zones à forte circulation, des remblais allégés pour la réduction de la poussée verticale et horizontale des terres et autres applications du génie civil.
Les produits sont fabriqués sous la forme de panneaux ou de blocs. La norme couvre également les panneaux ou bloc spécialement découpés.
La norme décrit les caractéristiques du produit et contient les procédures d'essai, d'évaluation de la conformité, de marquage et d'étiquetage.
La présente norme ne spécifie pas, pour une propriété donnée, la classe ou le niveau exigé que doit atteindre un produit pour démontrer son aptitude à l'emploi dans une application particulière. Les classes et niveaux requis pour une application donnée figurent dans les réglementations ou normes non-conflictuelles.
Pour les applications devant faire l'objet d'une résistance thermique, les produits dont la résistance thermique déclarée est inférieure à 0,25 m2 K/W ou dont la conductivité thermique déclarée est supérieure à 0,060 W/(mK) ne sont pas du domaine d'application de la présente norme. La présente norme ne couvre pas les produits d'isolation in situ et les produits destinés à l'isolation des bâtiments, de leurs équipements, des installations industrielles ou à l'isolation acoustique.
Toplotnoizolacijski in lahki polnilni proizvodi za inženirske objekte - Proizvodi iz ekspandiranega polistirena (XPS) - Specifikacija
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Thermal insulation and light weight fill products for civil engineering applications — Factory made products of expanded polystyrene (EPS) — SpecificationToplotnoizolacijski in lahki polnilni proizvodi za inženirske objekte - Proizvodi iz ekstrudiranega polistirena (XPS) - SpecifikacijaProduits isolants thermiques et de remblayage pour les applications de génie civil — Produits manufacturés en polystyrene expansé (EPS) — SpécificationsWärmedämmung und leichte Füllprodukte für Anwendungen im Tiefbau — Werkmäßig hergestellte Produkte aus expandiertem Polystyrol (EPS) — SpezifikationTa slovenski standard je istoveten z:EN 14933:2007SIST EN 14933:2007en,de91.100.60Thermal and sound insulating materials83.100Penjeni polimeriCellular materialsICS:SLOVENSKI
STANDARDSIST EN 14933:200701-december-2007
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14933September 2007ICS 83.100; 93.010 English VersionThermal insulation and light weight fill products for civilengineering applications - Factory made products of expandedpolystyrene (EPS) - SpecificationProduits isolants thermiques et de remblayage pour lesapplications de génie civil - Produits manufacturés enPolystyrène expansé (EPS) - SpécificationsWärmedämmung und leichte Füllprodukte fürAnwendungen im Tiefbau - Werkmäßig hergestellteProdukte aus expandiertem Polystyrol (EPS) - SpezifikationThis European Standard was approved by CEN on 13 July 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2007 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14933:2007: E
Determination of the declared values of thermal resistance and thermal conductivity.25 A.1 Introduction.25 A.2 Input data.25 A.3 Declared values.25 A.3.1 General.25 A.3.2 Case where thermal resistance and thermal conductivity are declared.25 A.3.3 Case where thermal resistance alone is declared.26 Annex B (normative)
Factory production control.27 B.1 Testing frequencies.27 B.2 Indirect testing.31 B.2.1 General.31 B.2.2 Compressive stress at 10 % deformation.31 B.2.3 Thermal conductivity.32 Annex C (normative)
Product classification.33 Annex D (normative)
Determination of behaviour under cyclic square-wave load.34 D.1 Scope.34 D.2 Definitions.34 D.3 Principle.35 D.4 Testing equipment.35 D.4.1 Cutting tool.35 D.4.2 Length measuring equipment.35 D.4.3 Steel plate.35 D.4.4 Measuring gauges.35 D.4.5 Apparatus.35 D.5 Test specimens.36 D.5.1 Dimensions of test specimens.36 D.5.2 Number of test specimens.36 D.5.3 Conditioning of test specimens.36
Additional properties.40 E.1 General.40 E.2 Compressive modulus of elasticity.40 E.3 Determination of shear strength.40 E.4 Long-term compressive behaviour.41 E.5 Water vapour diffusion resistance factor.42 E.6 Additional information.42 Annex ZA (informative)
Relationship between this European Standard and the Essential Requirements of EU Directive 89/106/EEC, EU Construction Products Directive.43 ZA.1 Scope and relevant characteristics.43 ZA.2 Procedures for attestation of conformity of expanded polystyrene products.45 ZA.2.1 Systems of attestation of conformity.45 ZA.2.2 EC certificate and declaration of conformity.48 ZA.3 CE Marking and labelling.50 Bibliography.52
Figures Figure B.1 — Relationship between compressive stress at 10 % deformation and apparent density for indirect testing; 1 – αααα = 0,90; n = 495.31 Figure B.2 — Relationship between declared thermal conductivity (at 50 mm reference thickness) and apparent density; 1 – αααα = 0,90; n = 3 873.32 Figure D.1 — Required load cycle during the fatigue test.36 Figure D.2 — Dimensions of the test specimen.37 Figure D.3 — Test set-up.38 Figure ZA.1 — Example CE marking information.51
Tables Table 1 — Classes of dimensional tolerances.12 Table 2 — Levels for compressive stress at 10 % deformation.13 Table 3 — Levels of dimensional stability under specified temperature and humidity conditions.14 Table 4 — Levels of deformation under specified compressive load and temperature conditions.14 Table 5 — Levels for compressive stress at 2 % deformation.15 Table 6 — Levels for compressive stress at 5 % deformation.15 Table 7 — Levels of bending strength.17
...
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Toplotnoizolacijski in lahki polnilni proizvodi za inženirske objekte - Proizvodi iz ekspandiranega polistirena (XPS) - SpecifikacijaWärmedämmung und leichte Füllprodukte für Anwendungen im Tiefbau — Werkmäßig hergestellte Produkte aus expandiertem Polystyrol (EPS) — SpezifikationProduits isolants thermiques et de remblayage pour les applications de génie civil — Produits manufacturés en polystyrene expansé (EPS) — SpécificationsThermal insulation and light weight fill products for civil engineering applications — Factory made products of expanded polystyrene (EPS) — Specification91.100.60Thermal and sound insulating materials83.100Penjeni polimeriCellular materialsICS:Ta slovenski standard je istoveten z:EN 14933:2007SIST EN 14933:2007en,de01-december-2007SIST EN 14933:2007SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14933September 2007ICS 83.100; 93.010 English VersionThermal insulation and light weight fill products for civilengineering applications - Factory made products of expandedpolystyrene (EPS) - SpecificationProduits isolants thermiques et de remblayage pour lesapplications de génie civil - Produits manufacturés enPolystyrène expansé (EPS) - SpécificationsWärmedämmung und leichte Füllprodukte fürAnwendungen im Tiefbau - Werkmäßig hergestellteProdukte aus expandiertem Polystyrol (EPS) - SpezifikationThis European Standard was approved by CEN on 13 July 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2007 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14933:2007: ESIST EN 14933:2007
Determination of the declared values of thermal resistance and thermal conductivity.25 A.1 Introduction.25 A.2 Input data.25 A.3 Declared values.25 A.3.1 General.25 A.3.2 Case where thermal resistance and thermal conductivity are declared.25 A.3.3 Case where thermal resistance alone is declared.26 Annex B (normative)
Factory production control.27 B.1 Testing frequencies.27 B.2 Indirect testing.31 B.2.1 General.31 B.2.2 Compressive stress at 10 % deformation.31 B.2.3 Thermal conductivity.32 Annex C (normative)
Product classification.33 Annex D (normative)
Determination of behaviour under cyclic square-wave load.34 D.1 Scope.34 D.2 Definitions.34 D.3 Principle.35 D.4 Testing equipment.35 D.4.1 Cutting tool.35 D.4.2 Length measuring equipment.35 D.4.3 Steel plate.35 D.4.4 Measuring gauges.35 D.4.5 Apparatus.35 D.5 Test specimens.36 D.5.1 Dimensions of test specimens.36 D.5.2 Number of test specimens.36 D.5.3 Conditioning of test specimens.36 SIST EN 14933:2007
Additional properties.40 E.1 General.40 E.2 Compressive modulus of elasticity.40 E.3 Determination of shear strength.40 E.4 Long-term compressive behaviour.41 E.5 Water vapour diffusion resistance factor.42 E.6 Additional information.42 Annex ZA (informative)
Relationship between this European Standard and the Essential Requirements of EU Directive 89/106/EEC, EU Construction Products Directive.43 ZA.1 Scope and relevant characteristics.43 ZA.2 Procedures for attestation of conformity of expanded polystyrene products.45 ZA.2.1 Systems of attestation of conformity.45 ZA.2.2 EC certificate and declaration of conformity.48 ZA.3 CE Marking and labelling.50 Bibliography.52
Figures Figure B.1 — Relationship between compressive stress at 10 % deformation and apparent density for indirect testing; 1 – αααα = 0,90; n = 495.31 Figure B.2 — Relationship between declared thermal conductivity (at 50 mm reference thickness) and apparent density; 1 – αααα = 0,90; n = 3 873.32 Figure D.1 — Required load cycle during the fatigue test.36 Figure D.2 — Dimensions of the test specimen.37 Figure D.3 — Test set-up.38 Figure ZA.1 — Example CE marking information.51
Tables Table 1 — Classes of dimensional tolerances.12 Table 2 — Levels for compressive stress at 10 % deformation.13 Table 3 — Levels of dimensional stability under specified temperature and humidity conditions.14 Table 4 — Levels of deformation under specified compressive load and temperature conditions.14 Table 5 — Levels for compressive stress at 2 % deformation.15 Table 6 — Levels for compressive stress at 5 % deformation.15 Table 7 — Levels of bending strength.17 SIST EN 14933:2007
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.