Petroleum and natural gas industries - Drilling and well-servicing equipment (ISO 14693:2003)

ISO 14693:2003 provides general principles and specifies requirements for design, manufacture and testing of new drilling and well-servicing equipment and of replacement primary load-carrying components manufactured subsequent to the publication of ISO 14693:2003.
ISO 14693:2003 is applicable to the following equipment:
-- rotary tables;
-- rotary bushings;
-- rotary slips;
-- rotary hoses;
-- piston mud-pump components;
-- drawworks components;
-- spiders not capable of use as elevators;
-- manual tongs;
-- safety clamps not used as hoisting devices;
-- power tongs, including spinning wrenches.
Annex A gives a number of standardized supplementary requirements which apply only when specified.

Erdöl- und Erdgasindustrie - Ausrüstungen für Bohr- und Bohrlocharbeiten (ISO 14693:2003)

1.1   Zweck
Diese Internationale Norm enthält allgemeine Grundsätze und legt Anforderungen fest für die Konstruktion, Herstellung und Prüfung von neuen Ausrüstungen für Bohr- und Bohrlocharbeiten sowie den Austausch von primärlasttragenden Bauteilen, die nach der Veröffentlichung dieser Internationalen Norm hergestellt werden.
1.2   Ausrüstung
Diese Internationale Norm gilt für die folgende Ausrüstung:
a)   Drehtische;
b)   Drehtischeinsätze;
c)   Abfangkeile;
d)   Rotary-Bohrschläuche (Spülschläuche);
e)   Spülpumpenteile;
f)   Hebewerkelemente;
g)   Keiltöpfe (Spider), die nicht als Elevatoren eingesetzt werden können;
h)   handbetätigte Zangen;
i)   Sicherheits-Gliederklemmen, die nicht als Hebeeinrichtungen eingesetzt werden;
j)   kraftbetätigte Zangen, einschließlich Einspillzangen
1.3   Zusätzliche Anforderungen
Zusätzliche Anforderungen gelten nur nach Festlegung. Anhang A enthält eine Reihe genormter zusätzlicher Anforderungen.

Industries du pétrole et du gaz naturel - Equipement de forage et d'entretien des puits (ISO 14693:2003)

Petroleum and natural gas industries - Drilling and well-servicing equipment (ISO 14693:2003)

General Information

Status
Published
Publication Date
14-Dec-2003
Withdrawal Date
29-Jun-2004
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
15-Dec-2003
Completion Date
15-Dec-2003

Buy Standard

Standard
EN ISO 14693:2004
English language
83 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 14693:2004
01-maj-2004
Petroleum and natural gas industries - Drilling and well-servicing equipment (ISO
14693:2003)
Petroleum and natural gas industries - Drilling and well-servicing equipment (ISO
14693:2003)
Erdöl- und Erdgasindustrie - Ausrüstungen für Bohr- und Bohrlocharbeiten (ISO
14693:2003)
Industries du pétrole et du gaz naturel - Equipement de forage et d'entretien des puits
(ISO 14693:2003)
Ta slovenski standard je istoveten z: EN ISO 14693:2003
ICS:
75.180.10 Oprema za raziskovanje in Exploratory and extraction
odkopavanje equipment
SIST EN ISO 14693:2004 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 14693:2004

---------------------- Page: 2 ----------------------

SIST EN ISO 14693:2004

---------------------- Page: 3 ----------------------

SIST EN ISO 14693:2004

---------------------- Page: 4 ----------------------

SIST EN ISO 14693:2004


INTERNATIONAL ISO
STANDARD 14693
First edition
2003-12-15


Petroleum and natural gas industries —
Drilling and well-servicing equipment
Industries du pétrole et du gaz naturel — Équipement de forage et
d'entretien des puits




Reference number
ISO 14693:2003(E)
©
ISO 2003

---------------------- Page: 5 ----------------------

SIST EN ISO 14693:2004
ISO 14693:2003(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


©  ISO 2003
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland

ii © ISO 2003 – All rights reserved

---------------------- Page: 6 ----------------------

SIST EN ISO 14693:2004
ISO 14693:2003(E)
Contents Page
Foreword. v
Introduction . vi
1 Scope. 1
2 Normative references . 1
3 Terms, definitions and abbreviated terms. 3
3.1 Terms and definitions. 3
3.2 Abbreviated terms. 5
4 Design . 5
4.1 Design conditions . 5
4.2 Strength analysis . 5
4.3 Size class designation. 7
4.4 Rating . 7
4.5 Load rating basis .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.