Bituminous mixtures - Test methods for hot mix asphalt - Part 39: Binder content by ignition

This European Standard describes a test method for the determination of the binder content of samples of bituminous mixtures by ignition. As such, it is an alternative to the more traditional method of extracting the binder using solvents. The method can be used for evaluation of mixture composition because the remaining aggregate can be used for determining aggregate gradation and density provided excessive breakdown of the aggregate particles does not occur at the temperature reached. The results can be used for process control or checks on the compliance of mixtures. However, the need for calibration of a mixture or its component materials before an analysis can be carried out makes this method easier to use with regularly used mixtures rather than with an extensive range of different mixtures from different aggregate sources. The test method is equally suitable for the analysis of mixtures containing unmodified or modified binders because the method has to be calibrated for each mixture being checked when calibration on mixtures is used.

Asphalt - Prüfverfahren für Heißasphalt - Teil 39: Bindemittelgehalt durch Thermoanalyse

Diese Europäische Norm beschreibt die Verfahren, die bei der Bestimmung des Bindemittelgehaltes von Asphalt-Proben durch Thermoanalyse durchzuführen sind. Als solche stellen sie eine Alternative zum eher traditionellen Verfahren der Bindemittelextraktion mit Lösemitteln dar. Das Verfahren kann zur Bewertung der Mischgutzusammensetzung verwendet werden, weil die verbleibenden Gesteinskörnungen zur Bestimmung der Korngrößenverteilung der Gesteinskörnungen und der Dichte verwendet werden können, vorausgesetzt, dass bei der erreichten Temperatur kein übermäßiger Zerfall der Gesteinskörnungen auftritt. Die Ergebnisse können zur Prozesslenkung oder Überprüfung der Übereinstimmung von Mischgütern verwendet werden. Die Notwendigkeit der Kalibrierung eines Mischgutes bevor eine Untersuchung durchgeführt werden kann, führt jedoch dazu, dass es bei regelmäßig verwendeten Mischgütern zu bevorzugen ist.
ANMERKUNG 1   Die Kalibrierung kann am gesamten Mischgut oder nur an den im Mischgut verwendeten Gesteinskörnungen durchgeführt werden, ersteres ist jedoch zu bevorzugen (besonders bei Mischgütern mit einem hohen Bindemittelgehalt).
ANMERKUNG 2   Bei Änderungen im Mischgut, einschließlich Änderungen von Bestandteilen oder deren Anteilen, ist eine erneute Kalibrierung erforderlich.
Das Prüfverfahren ist ebenso geeignet für die Untersuchung von Mischgütern mit nicht modifizierten oder modifizierten Bindemitteln, weil das Verfahren für jedes zu überprüfende Mischgut zu kalibrieren ist.
Wenn die Kalibrierung nicht auf im Labor hergestelltem Asphalt beruht, muss als Referenzverfahren die Untersuchung von Asphalt-Mischgütern nach EN 12697-1 angewendet werden.

Mélanges bitumineux - Méthodes d'essai pour mélange hydrocarboné à chaud - Partie 39: Détermination de la teneur en liant par calcination

La présente Norme européenne décrit les procédures à suivre pour la détermination de la teneur en liant d'échantillons de mélanges bitumineux par calcination. Comme telle, elle représente une alternative à la méthode plus traditionnelle d'extraction de liant au moyen de solvants. La méthode peut être utilisée pour l'évaluation de la composition d'un mélange, les granulats résultants pouvant servir à déterminer la granularité et la masse volumique du granulat à condition que les grains n'aient pas subi des éclatements excessifs à cause de la température atteinte. Les résultats peuvent être utilisés pour la maîtrise de la fabrication ou pour des vérifications de conformité des mélanges. Toutefois, la nécessité de calibrer un mélange avant de réaliser une analyse rend cette méthode préférable pour des mélanges utilisés régulièrement, plutôt que pour des familles de mélanges comportant des composants d'origines variées. La méthode d'essai est applicable également pour des mélanges comportant des liants modifiés ou non, le calibrage étant effectué pour chaque mélange à analyser.

Bitumenske zmesi – Preskusne metode za vroče asfaltne zmesi – 39. del: Delež veziva ob žarenju

General Information

Status
Withdrawn
Publication Date
12-Oct-2004
Withdrawal Date
05-Jun-2012
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
06-Jun-2012
Completion Date
06-Jun-2012

Relations

Buy Standard

Standard
EN 12697-39:2005
English language
21 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Asphalt - Prüfverfahren für Heißasphalt - Teil 39: Bindemittelgehalt durch ThermoanalyseMélanges bitumineux - Méthodes d'essai pour mélange hydrocarboné a chaud - Partie 39: Détermination de la teneur en liant par calcinationBituminous mixtures - Test methods for hot mix asphalt - Part 39: Binder content by ignition93.080.20Materiali za gradnjo cestRoad construction materialsICS:Ta slovenski standard je istoveten z:EN 12697-39:2004SIST EN 12697-39:2005en01-januar-2005SIST EN 12697-39:2005SLOVENSKI
STANDARD



SIST EN 12697-39:2005



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12697-39October 2004ICS 93.080.20 English versionBituminous mixtures - Test methods for hot mix asphalt - Part39: Binder content by ignitionMélanges bitumineux - Méthodes d'essai pour mélangehydrocarboné à chaud - Partie 39: Détermination de lateneur en liant par calcinationAsphalt - Prüfverfahren für Heißasphalt - Teil 39:Bindemittelgehalt durch ThermoanalyseThis European Standard was approved by CEN on 29 July 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12697-39:2004: ESIST EN 12697-39:2005



EN 12697-39:2004 (E) 2 Contents page Foreword.3 1 Scope.6 2 Normative references.6 3 Terms and definitions.6 4 Principle.8 5 Apparatus.8 6 Preparatory treatment of laboratory samples of bituminous mixtures.9 7 Procedure.10 8 Calculation.12 9 Test report.14 10 Precision data.14 Annex A (normative)
Calculation of calibration value.15 Annex B (informative)
Aggregate grading.20 Bibliography.21
SIST EN 12697-39:2005



EN 12697-39:2004 (E) 3 Foreword This document (EN 12697-39:2004) has been prepared by Technical Committee CEN/TC 227 “Road materials”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2005, and conflicting national standards shall be withdrawn at the latest by April 2005. This E
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.