EN 13286-50:2004

Unbound and hydraulically bound mixtures - Part 50: Method for the manufacture of test specimens of hydraulically bound mixtures using Proctor equipment or vibrating table compaction

This document specifies a test method for making cylindrical specimens of hydraulically bound mixture to a predetermined density using Proctor equipment or vibrating table compaction. The method is appropriate for mixtures, or that part of a mixture, containing aggregate up to a maximum size of 31,5 mm.

Ungebundene und hydraulisch gebundene Gemische - Teil 50: Verfahren zur Herstellung von Probekörpern von hydraulisch gebundenen Gemischen durch Verdichtung mit Proctorgerät oder Vibrationstisch

Mélanges traités et mélanges non traités aux liants hydrauliques - Partie 50: Méthode de confection par compactage avec un appareillage Proctor ou une table vibrante des éprouvettes de matériaux traités aux liants hydrauliques

La présente Norme européenne spécifie une méthode pour fabriquer des éprouvettes cylindriques d'une masse volumique prédéfinie, par compactage à l'aide d'un appareillage Proctor ou d'une table vibrante. La méthode est adaptée aux mélanges, ou à la fraction d'un mélange, contenant des granulats d'une dimension maximale de 31,5 mm.

Nevezane in hidravlično vezane zmesi – 50. del: Postopek (metoda) za pripravo preizkušancev iz hidravlično vezanih zmesii, zgoščenih po Proctorjevem postopku ali vibracijsko mizo

General Information

• Status: Published
• Publication Date: 21-Dec-2004
• Withdrawal Date: 29-Jun-2005
• ICS: 93.080.20 - Road construction materials
• Technical Committee: CEN/TC 227 - Road materials
• Drafting Committee: CEN/TC 227/WG 4 - Hydraulic bound and unbound mixtures (including byproducts and waste materials)
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 19-Jan-2024
• Ref Project: SIST EN 13286-50:2005 - Unbound and hydraulically bound mixtures - Part 50: Method for the manufacture of test specimens of hydraulically bound mixtures using Proctor equipment or vibrating table compaction

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 13286-50:2005
01-junij-2005
Nevezane in hidravlično vezane zmesi – 50. del: Postopek (metoda) za pripravo
preizkušancev iz hidravlično vezanih zmesii, zgoščenih po Proctorjevem postopku
ali vibracijsko mizo
Unbound and hydraulically bound mixtures - Part 50: Method for the manufacture of test
specimens of hydraulically bound mixtures using Proctor equipment or vibrating table
compaction
Ungebundene und hydraulisch gebundene Gemische - Teil 50: Verfahren zur
Herstellung von Probekörpern von hydraulisch gebundenen Gemischen durch
Verdichtung mit Proctorgerät oder Vibrationstisch
Mélanges traités et mélanges non traités aux liants hydrauliques - Partie 50: Méthode de
confection par compactage avec un appareillage Proctor ou une table vibrante des
éprouvettes de matériaux traités aux liants hydrauliques
Ta slovenski standard je istoveten z: EN 13286-50:2004
ICS:
93.080.20 Materiali za gradnjo cest Road construction materials
SIST EN 13286-50:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 13286-50:2005

---------------------- Page: 2 ----------------------
SIST EN 13286-50:2005
EUROPEAN STANDARD
EN 13286-50
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2004
ICS 93.080.20
English version
Unbound and hydraulically bound mixtures - Part 50: Method for
the manufacture of test specimens of hydraulically bound
mixtures using Proctor equipment or vibrating table compaction
Mélanges traités et mélanges non traités aux liants Ungebundene und hydraulisch gebundene Gemische - Teil
hydrauliques - Partie 50: Méthode de confection par 50: Verfahren zur Herstellung von Probekörpern von
compactage avec un appareillage Proctor ou une table hydraulisch gebundenen Gemischen durch Verdichtung mit
vibrante des éprouvettes de matériaux traités aux liants Proctorgerät oder Vibrationstisch
hydrauliques
This European Standard was approved by CEN on 12 November 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2004 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13286-50:2004: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 13286-50:2005
EN 13286-50:2004 (E)
Contents
Page
Foreword.3
1 Scope .5
2 Normative references .5
3 Terms and definitions .5
4 Principle.5
5 Dimensions of the specimens.5
6 Apparatus .6
7 Procedure .6
8 Storage.7
9 Test report .7


...

SLOVENSKI STANDARD
SIST EN 13286-50:2005
01-junij-2005
1HYH]DQHLQKLGUDYOLþQRYH]DQH]PHVL±GHO3RVWRSHNPHWRGD]DSULSUDYR
SUHL]NXãDQFHYL]KLGUDYOLþQRYH]DQLK]PHVLL]JRãþHQLKSR3URFWRUMHYHPSRVWRSNX
DOLYLEUDFLMVNRPL]R
Unbound and hydraulically bound mixtures - Part 50: Method for the manufacture of test
specimens of hydraulically bound mixtures using Proctor equipment or vibrating table
compaction
Ungebundene und hydraulisch gebundene Gemische - Teil 50: Verfahren zur
Herstellung von Probekörpern von hydraulisch gebundenen Gemischen durch
Verdichtung mit Proctorgerät oder Vibrationstisch
Mélanges traités et mélanges non traités aux liants hydrauliques - Partie 50: Méthode de
confection par compactage avec un appareillage Proctor ou une table vibrante des
éprouvettes de matériaux traités aux liants hydrauliques
Ta slovenski standard je istoveten z: EN 13286-50:2004
ICS:
93.080.20 Materiali za gradnjo cest Road construction materials
SIST EN 13286-50:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 13286-50:2005

---------------------- Page: 2 ----------------------

SIST EN 13286-50:2005
EUROPEAN STANDARD
EN 13286-50
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2004
ICS 93.080.20
English version
Unbound and hydraulically bound mixtures - Part 50: Method for
the manufacture of test specimens of hydraulically bound
mixtures using Proctor equipment or vibrating table compaction
Mélanges traités et mélanges non traités aux liants Ungebundene und hydraulisch gebundene Gemische - Teil
hydrauliques - Partie 50: Méthode de confection par 50: Verfahren zur Herstellung von Probekörpern von
compactage avec un appareillage Proctor ou une table hydraulisch gebundenen Gemischen durch Verdichtung mit
vibrante des éprouvettes de matériaux traités aux liants Proctorgerät oder Vibrationstisch
hydrauliques
This European Standard was approved by CEN on 12 November 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2004 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13286-50:2004: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 13286-50:2005
EN 13286-50:2004 (E)
Contents
Page
Foreword.3
1 Scope .5
2 Normative references .5
3 Terms and definitions .5
4 Principle.5
5 Dimensions of the specimens.5
6 Apparatus .6
7 Procedure .6
8 Storage.7
9 Test report .7

...