EN 13823:2010

Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item

This European Standard specifies a method of test for determining the reaction to fire performance of construction products excluding floorings, and excluding products which are indicated in Table 1 of EC Decision 2000/147/EC, when exposed to thermal attack by a single burning item (SBI). The calculation procedures are given in Annex A. Information on the precision of the test method is given in Annex B. The calibration procedures are given in Annexes C and D, of which C is a normative annex.
NOTE   This European Standard has been developed to determine the reaction to fire performance of essentially flat products. The treatment of some families of products, e.g. linear products (pipes, ducts, cables etc.), can need special rules.

Prüfungen zum Brandverhalten von Bauprodukten - Thermische Beanspruchung durch einen einzelnen brennenden Gegenstand für Bauprodukte mit Ausnahme von Bodenbelägen

Diese Europäische Norm legt ein Prüfverfahren zur Bestimmung des Brandverhaltens von Bauprodukten bei
thermischer Beanspruchung durch einen einzelnen brennenden Gegenstand (SBI: „Single Burning Item“),
ausgenommen Bodenbeläge sowie Bauprodukte, die in Tabelle 1 der Entscheidung der Europäischen
Kommission 2000/147/EG aufgeführt sind, fest. Die Berechnungsverfahren sind in Anhang A angegeben.
Informationen zur Genauigkeit des Prüfverfahrens sind in Anhang B angegeben. Die Kalibrierverfahren sind in
Anhang C und Anhang D angegeben, wobei Anhang C normativ ist.
ANMERKUNG Diese Europäische Norm wurde erstellt, um das Brandverhalten von im Wesentlichen ebenen
Bauprodukten zu bestimmen. Die Behandlung von einigen Produktfamilien, wie Rohre, Lüftungsleitungen, Kabel usw.
kann besondere Regeln erfordern.

Essais de réaction au feu des produits de construction - Produits de construction à l'exclusion des revêtements de sol exposés à une sollicitation thermique provoquée par un objet isolé en feu

La présente Norme européenne définit une méthode d’essai de détermination de la performance de réaction au feu des produits de construction, à l’exception des revêtements de sol et des produits figurant dans le Tableau 1 de la Décision CE 2000/147/CE, exposés à la sollicitation thermique provoquée par un « Single Burning Item » (SBI) (Objet Isolé en Feu) (OIF). Les méthodes de calcul sont fournies dans l’Annexe A. Des informations relatives à la précision de la méthode d’essai sont données dans l’Annexe B. Les méthodes d’étalonnage figurent dans les Annexes C et D, C étant une annexe normative.
NOTE   La présente Norme européenne a été élaborée pour déterminer la performance de réaction au feu de produits essentiellement plats. Le traitement de quelques familles de produits linéaires (tubes, conduits, câbles, etc.) peut nécessiter des règles particulières.

Preskusi odziva gradbenih proizvodov na ogenj - Gradbeni proizvodi razen talnih oblog, izpostavljeni toplotnemu delovanju enega samega gorečega predmeta

Ta evropski standard določa metodo preskušanja za ugotavljanje požarne odpornosti gradbenih proizvodov z izjemo talnih oblog in proizvodov, ki so navedeni v Preglednici 1 Odločbe Evropske komisije 2000/147/ES, kadar so izpostavljeni toplotnemu delovanju enega samega gorečega predmeta (SBI). Postopki za izračun so podani v Dodatku A. Informacije o natančnosti preskusne metode so podane v Dodatku B. Postopki kalibracije so podani v Dodatkih C in D, pri čemer je C normativni dodatek.

General Information

• Status: Withdrawn
• Publication Date: 27-Jul-2010
• Withdrawal Date: 11-Nov-2014
• ICS: 13.220.50 - Fire-resistance of building materials and elements
• ICS: 91.060.01 - Elements of buildings in general
• ICS: 91.100.01 - Construction materials in general
• Technical Committee: CEN/TC 127 - Fire safety in buildings
• Drafting Committee: CEN/TC 127/WG 4 - Reaction to fire
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 12-Nov-2014
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/117 - Horizontal complement to the mandates to CEN/CENELEC concerning the execution of standardization work for the valuation of construction products and elements in respect of their resistance to fire
• Ref Project: SIST EN 13823:2011 - Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item

Relations

• Replaces: EN 13823:2002 - Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item
• Effective Date: 08-Jun-2022
• Merged Into: EN 13823:2010+A1:2014 - Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item
• Effective Date: 27-Aug-2014
• Amended By: EN 13823:2010/FprA1 - Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item
• Effective Date: 15-Jan-2014

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.UHGPHWDPrüfungen zum Brandverhalten von Bauprodukten - Thermische Beanspruchung durch einen einzelnen brennenden Gegenstand für Bauprodukte mit Ausnahme von BodenbelägenEssais de réaction au feu des produits de construction - Produits de construction à l'exclusion des revêtements de sol exposés à une sollicitation thermique provoquée par un objet isolé en feuReaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item13.220.50Požarna odpornost gradbenih materialov in elementovFire-resistance of building materials and elementsICS:Ta slovenski standard je istoveten z:EN 13823:2010SIST EN 13823:2011en,fr,de01-januar-2011SIST EN 13823:2011SLOVENSKI
STANDARDSIST EN 13823:20021DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13823
July 2010 ICS 13.220.50; 91.060.01; 91.100.01 Supersedes EN 13823:2002English Version
Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item
Essais de réaction au feu des produits de construction - Produits de construction à l'exclusion des revêtements de sol exposés à une sollicitation thermique provoquée par un objet isolé en feu
Prüfungen zum Brandverhalten von Bauprodukten - Thermische Beanspruchung durch einen einzelnen brennenden Gegenstand für Bauprodukte mit Ausnahme von Bodenbelägen This European Standard was approved by CEN on 25 June 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13823:2010: ESIST EN 13823:2011

Calculation procedures . 24 A.1 General . 24 A.1.1 General remarks . 24 A.1.2 Calculations to be performed on the test data . 25 A.1.3 Calculations to be performed on calibration data . 25 A.1.4 Standard data set . 25 A.2 Synchronization of data . 25 A.3 Checking equipment response . 27 A.3.1 Temperature readings . 27 A.3.2 Drift in gas concentration measurement . 27 A.3.3 Drift in light attenuation measurement . 27 SIST EN 13823:2011

Precision of test method . 38 B.1 General remarks and results . 38 B.2 Calculation of test results . 39 B.3 Statistical analysis . 39 B.4 Statistical results . 39 Annex C (normative)
Calibration procedures . 43 C.1 Procedures for separate pieces of equipment . 43 C.1.1 General . 43 C.1.2 Oxygen analyser adjustment . 43 C.1.3 Oxygen analyser output noise and drift . 43 C.1.4 Carbon dioxide analyser adjustment . 44 C.1.5 Check of propane mass flow controller . 44 C.1.6 Light system calibration . 44 C.2 System response calibrations . 45 C.2.1 Burner switch response time . 45 C.2.2 Burner heat output step calibration . 47 C.2.3 Heptane calibration . 50 C.2.4 Velocity profile factor kt,v . 52 C.2.5 Flow factor kt . 54 Annex D (informative)
Calibration procedures . 55 D.1 Procedures for separate pieces of equipment . 55 D.1.1 General . 55 D.1.2 Oxygen analyser adjustment . 55 D.1.3 Carbon dioxide analyser adjustment . 55 D.1.4 Check of propane mass flow controller . 55 D.1.5 Optical filter check . 56 D.2 Check of the thermal attack on the specimens . 57 D.2.1 General . 57 D.2.2 Procedure . 57 Annex E (normative)
Design drawings . 58 Annex F (informative)
Data file format .
...