EN 353-1:2014

Personal fall protection equipment - Guided type fall arresters including an anchor line - Part 1: Guided type fall arresters including a rigid anchor line

This European Standard specifies the requirements, test methods, marking, information supplied by the manufacturer and packaging for guided type fall arresters including a rigid anchor line. This anchor line is usually attached to or integrated in ladders or rungs adequately fixed to suitable structures. Guided type fall arresters including a rigid anchor line conforming to this European Standard are components of one of the fall arrest systems covered by EN 363.
This European Standard applies to rigid anchor lines which are intended to be installed vertically and/or with a combination of forward-leaning angle and/or sideways leaning angle between the true vertical and the vertical +15° (see Figure 2).
Multi-user applications, i.e. rigid anchor lines that allow more than one user to be attached at any one time, are not addressed in this document.

Persönliche Schutzeinrichtung gegen Absturz - Mitlaufende Auffanggeräte einschließlich fester Führung - Teil 1: Mitlaufende Auffanggeräte einschließlich fester Führung

Diese Europäische Norm legt Anforderungen, Prüfverfahren, Kennzeichnung, Informationen des Herstellers und Verpackung für mitlaufende Auffanggeräte einschließlich fester Führung fest. Diese feste Führung ist in der Regel an Leitern oder Sprossen, die an geeigneten baulichen Einrichtungen angemessen angebracht sind, befestigt oder in diesen eingebaut. Mitlaufende Auffanggeräte einschließlich fester Führung, die dieser Europäischen Norm entsprechen, sind Bestandteile eines der Auffangsysteme nach EN 363.
Diese Europäische Norm gilt für feste Führungen, die zur Installation in vertikaler Anordnung und/oder zur Installation in Kombination einer Vorwärts- und/oder  Seitwärtsneigung von bis zu 15° zur absoluten Vertikalen (siehe Bild 2) vorgesehen sind.
Anwendungen für mehrere Benutzer, d. h. feste Führungen, die so ausgelegt sind, dass sie gleichzeitig durch mehrere Personen verwendet werden können, werden in diesem Dokument nicht behandelt.

Équipement de protection individuelle contre les chutes de hauteur - Antichutes mobiles incluant un support d'assurage - Partie 1 : Antichutes mobiles incluant un support d'assurage rigide

La présente Norme européenne définit les exigences, les méthodes d'essai, le marquage, la notice d'information du fabricant et l'emballage des antichutes mobiles incluant un support d'assurage rigide. Ce support d'assurage est généralement accroché ou intégré à des échelles ou à des barreaux d'ascension fixés de manière adéquate sur des structures appropriées. Les antichutes mobiles incluant un support d'assurage rigide conformes à la présente Norme européenne sont des composants de l'un des systèmes d'arrêt des chutes couverts par l'EN 363.
La présente Norme européenne s'applique aux supports d'assurage rigides destinés à être installés verticalement et/ou en combinaison avec un angle d'inclinaison vers l'avant et/ou un angle d'inclinaison latéral entre la véritable verticale et la verticale  15° (voir Figure 2).
Le présent document ne traite pas des applications destinées à plusieurs utilisateurs, c'est-à-dire des supports d'assurage rigides qui permettent l'accrochage à un moment quelconque de plusieurs utilisateurs.

Osebna oprema za varovanje pred padci - Drseče naprave za zaustavljanje na vodilu, vključno s sidrnim vodilom - 1. del: Drseče naprave za zaustavljanje na vodilu, vključno s togim sidrnim vodilom

Ta evropski standard določa zahteve, preskusne metode, označevanje, informacije, ki jih mora priložiti proizvajalec, in embalažo za drseče naprave za zaustavljanje na vodilu, vključno s sidrnim vodilom, ki so običajno pritrjene ali vgrajene v fiksne lestve ali kline, ustrezno prilagojene za primerne strukture. Drseče naprave za zaustavljanje na vodilu, vključno s sidrnim vodilom, ki so v skladu s tem evropskim standardom, so sestavljene iz enega od sistemov zaustavljanja, ki jih zajema standard EN 363, kadar so uporabljene skupaj s pasom za celo telo, kar določa standard EN 361, vključno ustreznim mestom točke pritrditve na napravi za zaustavljanje.

General Information

• Status: Withdrawn
• Publication Date: 30-Sep-2014
• Withdrawal Date: 19-Dec-2017
• ICS: 13.340.60 - Protection against falling and slipping
• ICS: 13.340.99 - Other protective equipment
• Technical Committee: CEN/TC 160 - Protection against falls from height including working belts
• Drafting Committee: CEN/TC 160/WG 2 - Personal fall arresting systems, components and systems
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 20-Dec-2017
• Directive: 2016/425 - Regulation (EU) 2016/425 of the European Parliament and of the Council of 9 March 2016 on personal protective equipment and repealing Council Directive 89/686/EEC
• Directive: 89/686/EEC - Council Directive 89/686/EEC of 21 December 1989 on the approximation of the laws of the Member States relating to personal protective equipment
• Mandate: M/031 - Standardization mandate to CEN/CENELEC concerning standards for Personal Protective Equipment
• Mandate: M/472 - Standardisation mandate given to the European Committee for Standardisation (CEN) under directive 1989/686/EEC on Personal Protective Equipment with a view to amendment of standard EN 353-1:2002 - Personal protective equipment against falls from a height - Part 1: Guided type fall arresters including a rigid anchor line
• Ref Project: SIST EN 353-1:2014 - Personal fall protection equipment - Guided type fall arresters including an anchor line - Part 1: Guided type fall arresters including a rigid anchor line

Relations

• Replaces: EN 353-1:2002 - Personal protective equipment against falls from a height - Part 1: Guided type fall arresters including a rigid anchor line
• Effective Date: 08-Oct-2014
• Merged Into: EN 353-1:2014+A1:2017 - Personal fall protection equipment - Guided type fall arresters including an anchor line - Part 1: Guided type fall arresters including a rigid anchor line
• Effective Date: 19-Jan-2023
• Amended By: EN 353-1:2014/prA1:2017 - Personal fall protection equipment - Guided type fall arresters including an anchor line - Part 1: Guided type fall arresters including a rigid anchor line
• Effective Date: 17-Aug-2016

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Persönliche Schutzeinrichtung gegen Absturz - Mitlaufende Auffanggeräte einschließlich fester Führung - Teil 1: Mitlaufende Auffanggeräte einschließlich fester FührungÉquipement de protection individuelle contre les chutes de hauteur - Antichutes mobiles incluant un support d'assurage - Partie 1 : Antichutes mobiles incluant un support d'assurage rigidePersonal fall protection equipment - Guided type fall arresters including an anchor line - Part 1: Guided type fall arresters including a rigid anchor line13.340.60Protection against falling and slippingICS:Ta slovenski standard je istoveten z:EN 353-1:2014SIST EN 353-1:2014en,fr,de01-december-2014SIST EN 353-1:2014SLOVENSKI
STANDARDSIST EN 353-1:20021DGRPHãþD



SIST EN 353-1:2014



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 353-1
October 2014 ICS 13.340.60 Supersedes EN 353-1:2002English Version
Personal fall protection equipment - Guided type fall arresters including an anchor line - Part 1: Guided type fall arresters including a rigid anchor line
Équipement de protection individuelle contre les chutes de hauteur - Antichutes mobiles incluant un support d'assurage - Partie 1 : Antichutes mobiles incluant un support d'assurage rigide
Persönliche Schutzeinrichtung gegen Absturz - Mitlaufende Auffanggeräte einschließlich fester Führung - Teil 1: Mitlaufende Auffanggeräte einschließlich fester Führung This European Standard was approved by CEN on 18 July 2014.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 353-1:2014 ESIST EN 353-1:2014



EN 353-1:2014 (E) 2 Contents Page Foreword . 4 Introduction . 5 1 Scope . 6 2 Normative references . 6 3 Terms and definitions . 6 4 Requirements .10 4.1 Materials and construction .10 4.1.1 Materials .10 4.1.2 Construction.11 4.2 Static strength .11 4.2.1 Energy dissipating element preloading .11 4.2.2 Guided type fall arrester including rigid anchor line .11 4.2.3 Stop devices .12 4.3 Dynamic perfo
...