Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value) (ISO 1716:2010)

ISO 1716:2010 specifies a method for the determination of the gross heat of combustion of products at constant volume in a bomb calorimeter.

Prüfungen zum Brandverhalten von Produkten - Bestimmung der Verbrennungswärme (ISO 1716:2010)

Diese Internationale Norm beschreibt ein Verfahren zur Bestimmung der Brutto-Verbrennungswärme (PCS)
von Bauprodukten bei konstantem Volumen in einem Bombenkalorimeter.
Für den Fall, dass die Netto-Verbrennungswärme (PCI) ermittelt werden muss, enthält Anhang A ein entsprechendes
Berechnungsverfahren.
Anhang B enthält Angaben zur Genauigkeit des Prüfverfahrens.

Essais de réaction au feu de produits - Détermination du pouvoir calorifique supérieur (valeur calorifique) (ISO 1716:2010)

L'ISO 1716:2010 prescrit une méthode permettant de déterminer le pouvoir calorifique supérieur (QPCS) des produits de construction, à un volume constant à l'intérieur d'une bombe calorimétrique.

Preskusi odziva gradbenih proizvodov na ogenj - Ugotavljanje specifične toplote zgorevanja (ISO 1716:2010)

Ta mednarodni standard določa metodo ugotavljanja specifične toplote zgorevanja (QPCS) proizvodov pri stalnem volumnu v komori-kalorimetru. Dodatek A opisuje izračun neto toplote pri zgorevanju (QPCI), kadar je to potrebno. Informacije o natančnosti preskusne metode so podane v Dodatku B.

General Information

Status
Withdrawn
Publication Date
14-Jun-2010
Withdrawal Date
10-Jul-2018
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
11-Jul-2018

Relations

Buy Standard

Standard
EN ISO 1716:2010
English language
33 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 1716:2010
01-december-2010
1DGRPHãþD
SIST EN ISO 1716:2002
3UHVNXVLRG]LYDJUDGEHQLKSURL]YRGRYQDRJHQM8JRWDYOMDQMHVSHFLILþQHWRSORWH
]JRUHYDQMD ,62
Reaction to fire tests for products - Determination of the gross heat of combustion
(calorific value) (ISO 1716:2010)
Prüfungen zum Brandverhalten von Produkten - Bestimmung der Verbrennungswärme
(ISO 1716:2010)
Essais de réaction au feu de produits — Détermination du pouvoir calorifique supérieur
(valeur calorifique) (ISO 1716:2010)
Ta slovenski standard je istoveten z: EN ISO 1716:2010
ICS:
13.220.50 Požarna odpornost Fire-resistance of building
gradbenih materialov in materials and elements
elementov
SIST EN ISO 1716:2010
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 1716:2010

---------------------- Page: 2 ----------------------

SIST EN ISO 1716:2010


EUROPEAN STANDARD
EN ISO 1716

NORME EUROPÉENNE

EUROPÄISCHE NORM
June 2010
ICS 13.220.50; 91.100.01 Supersedes EN ISO 1716:2002
English Version
Reaction to fire tests for products - Determination of the gross
heat of combustion (calorific value) (ISO 1716:2010)
Essais de réaction au feu de produits - Détermination du Prüfungen zum Brandverhalten von Bauprodukten -
pouvoir calorifique supérieur (valeur calorifique) (ISO Bestimmung der Verbrennungswärme (des Brennwerts)
1716:2010) (ISO 1716:2010)
This European Standard was approved by CEN on 26 May 2010.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.






EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 1716:2010: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 1716:2010
EN ISO 1716:2010 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 1716:2010
EN ISO 1716:2010 (E)
Foreword
This document (EN ISO 1716:2010) has been prepared by Technical Committee ISO/TC 92 "Fire safety" in
collaboration with Technical Committee CEN/TC 127 “Fire safety in buildings” the secretariat of which is held
by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by December 2010, and conflicting national standards shall be withdrawn
at the latest by December 2010.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 1716:2002.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 1716:2010 has been approved by CEN as a EN ISO 1716:2010 without any modification.


3

---------------------- Page: 5 ----------------------

SIST EN ISO 1716:2010

---------------------- Page: 6 ----------------------

SIST EN ISO 1716:2010

INTERNATIONAL ISO
STANDARD 1716
Third edition
2010-06-15

Reaction to fire tests for products —
Determination of the gross heat of
combustion (calorific value)
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.