EN 45545-2:2013

Railway applications - Fire protection on railway vehicles - Part 2: Requirements for fire behavior of materials and components

This part specifies the reaction to fire performance requirements for materials and products used on railway vehicles as defined in FprEN 45545-1.
The operation and design categories defined in FprEN 45545-1 are used to establish hazard levels that are used as the basis of a classification system.
For each hazard level, this part specifies the test methods, test conditions and reaction to fire performance requirements.
It is not within the scope of this European Standard to describe measures that ensure the preservation of the vehicles in the event of a fire.

Bahnanwendungen - Brandschutz in Schienenfahrzeugen - Teil 2: Anforderungen an das Brandverhalten von Materialien und Komponenten

Dieser Teil der EN 45545 legt die Brandschutzanforderungen an Werkstoffe und Komponenten für Schienenfahrzeuge nach EN 45545-1 fest.
Die Betriebs- und Bauartklassen nach EN 45545-1 werden verwendet, um die Gefährdungsstufen (en: Hazard Level; HL) zu ermitteln, nach denen sich die Anforderungen des Klassifizierungssystems orientieren.
Für jede Gefährdungsstufe legt dieser Teil die Prüfmethoden, Prüfbedingungen und die Anforderungen an das Brandverhalten fest.
Maßnahmen, die die Erhaltung der Fahrzeuge im Brandfall sicherstellen, gehören nicht zum Anwendungs-bereich dieser Europäischen Norm.

Applications ferroviaires - Protection contre les incendies dans les véhicules ferroviaires - Partie 2: Exigences du comportement au feu des matériaux et des composants

Cette partie de l’EN 45545 spécifie les exigences de performance de réaction au feu pour les matériaux et produits utilisés à bord de véhicules ferroviaires telles que définis dans l’EN 45545-1.
Les catégories d’exploitation et de conception définies dans l’EN 45545-1 sont utilisées pour établir les niveaux de risque servant de base au système de classification.
Pour chaque niveau de risque, cette partie spécifie les méthodes d’essai, les conditions d’essai, et les exigences de performance de réaction au feu.
Il n’est pas dans le champ d’application de la présente Norme européenne de décrire les mesures de protection des véhicules lors d’un incendie.

Železniške naprave - Požarna zaščita na železniških vozilih - 2. del: Zahteve za obnašanje materialov in sestavnih delov v požaru

Ta del standarda EN 45545 določa zahteve odziva na ogenj za materiale in proizvode, ki se uporabljajo na železniških vozilih, kot je opisano v standardu EN 45545-1. Obratovalne in konstrukcijske kategorije, podane v standardu EN 45545-1, se uporabljajo za določanje stopenj tveganja, ki so podlaga za razvrstitev v sistem. Za vsako stopnjo tveganja so v tem delu specifikacije določene preskusne metode, preskusni pogoji in zahteve odziva na ogenj. V okviru tega evropskega standarda niso opisani ukrepi, ki zagotavljajo zaščito vozil v primeru požara.

General Information

• Status: Withdrawn
• Publication Date: 05-Mar-2013
• Withdrawal Date: 20-Oct-2015
• ICS: 13.220.20 - Fire protection
• ICS: 45.060.01 - Railway rolling stock in general
• Technical Committee: CEN/TC 256 - Railway applications
• Drafting Committee: CEN/TC 256/WG 1 - Fire safety
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 21-Oct-2015
• Directive: 2008/57/EC - Directive 2008/57/EC of the European Parliament and of the Council of 17 June 2008 on the interoperability of the rail system within the Community (Recast)
• Mandate: M/275 - Mandate to CEN/CENELEC/ETSI for standardization in the field of railway equipment on the interoperability of the Trans-European high-speed rail system
• Mandate: M/334 - Mandate for programming and standardisation addressed to CEN, CENELEC and ETSI in the field of the Interoperability of the trans-european conventional rail system
• Mandate: M/483 - Mandate for programming and standardisation addressed to the European standardisation bodies under directive 2008/57/EC in the field of the interoperability of the rail system within the European Union
• Ref Project: SIST EN 45545-2:2013 - Railway applications - Fire protection on railway vehicles - Part 2: Requirements for fire behavior of materials and components

Relations

• Replaces: CEN/TS 45545-2:2009 - Railway applications - Fire protection on railway vehicles - Part 2: Requirements for fire behaviour of materials and components
• Effective Date: 12-Dec-2009
• Merged Into: EN 45545-2:2013+A1:2015 - Railway applications - Fire protection on railway vehicles - Part 2: Requirements for fire behaviour of materials and components
• Effective Date: 08-Jun-2022
• Amended By: EN 45545-2:2013/FprA1 - Railway applications - Fire safety on railway vehicles - Part 2: Requirements for fire behaviour of materials and components
• Effective Date: 11-Dec-2013

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Bahnanwendungen - Brandschutz in Schienenfahrzeugen - Teil 2: Anforderungen an das Brandverhalten von Materialien und KomponentenApplications ferroviaires - Protection contre les incendies dans les véhicules ferroviaires - Partie 2: Exigences du comportement au feu des matériaux et des composantsRailway applications - Fire protection on railway vehicles - Part 2: Requirements for fire behavior of materials and components45.060.01Železniška vozila na splošnoRailway rolling stock in general13.220.20Fire protectionICS:Ta slovenski standard je istoveten z:EN 45545-2:2013SIST EN 45545-2:2013en,fr01-maj-2013SIST EN 45545-2:2013SLOVENSKI
STANDARDOSIST prEN 45545-2:20051DGRPHãþD



SIST EN 45545-2:2013



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 45545-2
March 2013 ICS 45.060.01; 13.220.20 Supersedes CEN/TS 45545-2:2009
English Version
Railway applications - Fire protection on railway vehicles - Part 2: Requirements for fire behavior of materials and components
Applications ferroviaires - Protection contre les incendies dans les véhicules ferroviaires - Partie 2: Exigences du comportement au feu des matériaux et des composants
Bahnanwendungen - Brandschutz in Schienenfahrzeugen - Teil 2: Anforderungen an das Brandverhalten von Materialien und Komponenten This European Standard was approved by CEN on 7 December 2012.
CEN and CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN and CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN and CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN and CENELEC members are the national standards bodies and national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels © 2013 CEN/CENELEC All rights of exploitation in any form and by any means reserved worldwide for CEN national Members and for CENELEC Members. Ref. No. EN 45545-2:2013 E SIST EN 45545-2:2013



EN 45545-2:2013 (E) 2 Contents Page Foreword .4 Introduction .5 1 Scope .6 2 Normative references .6 3 Terms and definitions .7 4 Requirements .8 4.1 Essential fire safety objectives .8 4.2 General .8 4.3 Grouping rules .9 4.3.1 General .9 4.3.2 Rule 1 . 10 4.3.3 Rule 2 . 10 4.3.4 Rule 3 . 10 4.4 Listed products .
...