Jointing materials for gypsum plasterboards - Definitions, requirements and test methods

The document specifies the requirements of jointing compounds and paper tapes for use with gypsum plasterboard complying with EN 520, products from secondary processing of this board and gypsum boards with fibrous reinforcement.
This document covers materials applied by hand and by machine. Eight types of compounds are specified. Compounds based on gypsum and other materials are covered. Also specified are the paper tapes which are used in suitable jointing systems.
This document covers the following characteristics: reaction to fire and flexural strength, to be measured according to the corresponding European test methods.
It also covers additional technical characteristics that are of importance for the use and acceptance of the product by the Construction Industry.
It defines the reference test methods for technical specifications.
It provides for the evaluation of conformity of the product to this document.
Annex A specifies the sampling procedure for testing.
This document does not cover tapes which are made from materials other than paper.

Materialien für das Verspachteln von Gipsplatten-Fugen - Begriffe, Anforderungen und Prüfverfahren

Matériaux de jointoiement pour plaques de plâtre - Définitions, exigences et méthodes d'essai

Tesnilni materiali za mavčne plošče - Definicije, zahteve in preskusne metode

General Information

Status
Withdrawn
Publication Date
17-May-2005
Withdrawal Date
08-Jul-2014
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
09-Jul-2014

Relations

Buy Standard

Standard
EN 13963:2005
English language
31 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Jointing materials for gypsum plasterboards - Definitions, requirements and test methodsMatériaux de jointoiement pour plaques de plâtre - Définitions, exigences et méthodes d'essaiMaterialien für das Verspachteln von Gipsplatten-Fugen - Begriffe, Anforderungen und Prüfverfahren91.100.10Cement. Mavec. Apno. MaltaCement. Gypsum. Lime. MortarICS:SIST EN 13963:2005enTa slovenski standard je istoveten z:EN 13963:200501-september-2005SIST EN 13963:2005SLOVENSKI
STANDARD







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13963May 2005ICS 91.100.10English versionJointing materials for gypsum plasterboards - Definitions,requirements and test methodsMatériaux de jointoiement pour plaques de plâtre -Définitions, exigences et méthodes d'essaiMaterialien für das Verspachteln von Gipsplatten-Fugen -Begriffe, Anforderungen und PrüfverfahrenThis European Standard was approved by CEN on 14 February 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2005 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13963:2005: E



EN 13963:2005 (E) 2 Contents Page Foreword.3 Introduction.4 1 Scope.6 2 Normative references.6 3 Terms and definitions.6 3.11 Classification of compounds.7 4 Requirements.8 4.1 Reaction to fire.8 4.2 Flexural strength (expressed as breaking load).8 4.3 Regulated substances.8 4.4 Setting time.8 4.5 Freedom from cracking.8 4.6 Freedom from coarse particles.9 4.7 Adhesion/cohesion.9 4.8 Dimensional stability of paper tape.9 4.9 Breaking strength of paper tape.9 5 Test methods.9 5.1 Sampling.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.