iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 13963:2005/AC:2006

(Corrigendum)

Jointing materials for gypsum plasterboards - Definitions, requirements and test methods

Jointing materials for gypsum plasterboards - Definitions, requirements and test methods

TC - Modification to 4.7 and 5.5.2 g)

Materialien für das Verspachteln von Gipsplatten-Fugen - Begriffe, Anforderungen und Prüfverfahren

Matériaux de jointoiement pour plaques de plâtre - Définitions, exigences et méthodes d'essai

Tesnilni materiali za mavčne plošče – Definicije, zahteve in preskusne metode

General Information

Status
Withdrawn
Publication Date
06-Jun-2006
Withdrawal Date
08-Jul-2014
ICS
91.100.10 - Cement. Gypsum. Lime. Mortar
Technical Committee
CEN/TC 241 - Gypsum and gypsum based products
Drafting Committee
CEN/TC 241/WG 3 - Board products
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
09-Jul-2014
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
89/106/EEC - Construction products
Mandate
M/106 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on gypsum products
Ref Project
SIST EN 13963:2005/AC:2006 - Jointing materials for gypsum plasterboards - Definitions, requirements and test methods

Relations

Replaced By
EN 13963:2014 - Jointing materials for gypsum boards - Definitions, requirements and test methods
Effective Date
16-Jul-2014
Corrects
EN 13963:2005 - Jointing materials for gypsum plasterboards - Definitions, requirements and test methods
Effective Date
08-Jun-2022

Buy Standard

EN 13963:2005/AC:2006EN 13963:2005/AC:2006
PreviousNext
Corrigendum
EN 13963:2005/AC:2006
English, French and German language
2 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Jointing materials for gypsum plasterboards - Definitions, requirements and test methodsMatériaux de jointoiement pour plaques de plâtre - Définitions, exigences et méthodes d'essaiMaterialien für das Verspachteln von Gipsplatten-Fugen - Begriffe, Anforderungen und PrüfverfahrenTa slovenski standard je istoveten z:EN 13963:2005/AC:2006SIST EN 13963:2005/AC:2006en,fr,de91.100.10Cement. Mavec. Apno. MaltaCement. Gypsum. Lime. MortarICS:SLOVENSKI
STANDARDSIST EN 13963:2005/AC:200601-september-2006

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13963:2005/ACJune 2006Juin 2006Juni 2006ICS 91.100.10English versionVersion FrançaiseDeutsche FassungJointing materials for gypsum plasterboards - Definitions, requirements andtest methodsMatériaux de jointoiement pour plaques deplâtre - Définitions, exigences et méthodesd'essaiMaterialien für das Verspachteln vonGipsplatten-Fugen - Begriffe,Anforderungen und PrüfverfahrenThis corrigendum becomes effective on 7 June 2006 for incorporation in the three official languageversions of the EN.Ce corrigendum prendra effet le 7 juin 2006 pour incorporation dans les trois versions linguistiquesofficielles de la EN.Die Berichtigung tritt am 7.Juni 2006 zur Einarbeitung in die drei offiziellen Sprachfassungen der ENin Kraft.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by a
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 17328:2024(Main)
Complementary product category rules for gypsum-based construction products
SIST EN 17328:2024

This document provides product category rules (c-PCR), that are complementary to EN 15804:2012+A2:2019, for Type III environmental declarations for gypsum-based products for the construction industry.
This document:
—   specifies the functional and/or declared unit to be used;
—   defines the default system boundaries for gypsum-based construction products;
—   defines allocation procedures for the environmental impact of recycling and/or the use of by-products;
—   describes the default scenarios and rules for defining scenarios for each of the life cycle information modules A-D;
—   provides guidance for the determination of the reference service life (RSL) for gypsum-based construction products.
NOTE 1   Annex B of EN 15804:2012+A2:2019 has been complemented in an annex to this document.
NOTE 2   An Annex F has been added to this document.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13454-2:2019(Main)
Binders for floor screeds based on calcium sulphate - Part 2: Test methods
SIST EN 13454-2:2019

This document describes the test methods for binders for floor screeds based on calcium sulphate specified in EN 13454-1. In addition, some of the described test methods apply for factory made mixtures for floor screeds based on calcium sulphate specified in EN 13813.
This document describes reference test methods. If methods and conditions other than these are used, it is important to show that they give results equivalent to those given by the reference methods. In the event of a dispute, only the reference test method is used.
This document describes test methods for binders and made mixtures where the principal active component is calcium sulphate.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14496:2017(Main)
Gypsum based adhesives for thermal/acoustic insulation composite panels and gypsum boards - Definitions, requirements and test methods
SIST EN 14496:2017

This European Standard specifies the characteristics and performances of gypsum based adhesives which are composed of gypsum plasters defined in EN 13279-1 and of additives. These adhesives are used for fixing to walls and partitions, gypsum board thermal/acoustic insulation composite panels according to EN 13950, gypsum plasterboard linings according to EN 520, gypsum boards with mat reinforcement according to EN 15283-1, gypsum fibre boards according to EN 15283-2 and other suitable products as reprocessed boards according to EN 14190 and cornices according to EN 14209. They assist in the construction of systems which provide thermal and acoustic performance.
It covers the following performance characteristics: reaction to fire, fire resistance and bond strength to be measured according to the corresponding European test methods.
It provides the assessment and verification of constancy of performance of the products.
This standard covers also additional technical characteristics that are of importance for the use and acceptance of the product by the construction Industry and the reference tests for these characteristics.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14353:2017(Main)
Metal beads and feature profiles for use with gypsum plasterboards - Definitions, requirements and test methods
SIST EN 14353:2017

This European Standard specifies the characteristics and performance of metal beads, metal beads combined with paper tape and metal feature profiles designed for use in systems made with gypsum plasterboards according to EN 520, gypsum boards with fibrous reinforcement according to EN 15283-1 and EN 15283-2 and products from secondary processing according to EN 14190, gypsum board thermal/acoustic insulation composite panels according to EN 13950 and prefabricated gypsum board panels with a cellular paperboard core according to EN 13915, intended to be used in building construction works. Metal beads and feature profiles, depending upon their material and type, can be featured without decoration, decorated or finished with jointing compounds to receive decoration.
It covers the following performance characteristics: reaction to fire and flexural strength (bending behaviour) to be measured according to the corresponding European test methods.
It provides the assessment and verification of constancy of performance of the products
This European Standard covers also additional technical characteristics that are of importance for the use and acceptance of the product by the construction industry and the reference tests for these characteristics.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13915:2017(Main)
Prefabricated gypsum plasterboard panels with a cellular paperboard core - Definitions, requirements and test methods
SIST EN 13915:2017

This European Standard specifies the characteristics and performance of prefabricated panels made of gypsum plasterboard facings complying with EN 520 and a cellular paperboard core intended to be used as a lightweight partition, lining and encasement for general use in buildings.
This standard covers the following characteristics: reaction to fire, water vapour permeability, flexural strength (breaking load) and thermal resistance to be measured according to the corresponding European test methods.
This Standard covers only prefabricated panels installed so that the core is not exposed.
The following performance characteristics are linked to systems assembled with prefabricated panels made of gypsum plasterboard facings and a cellular paperboard core: shear strength, fire resistance, direct airborne sound insulation, acoustic absorption and air permeability to be measured according to the corresponding European test methods. If required, tests should be done on assembled systems simulating the end use conditions.
This document covers also additional technical characteristics that are of importance for the use and acceptance of the product by the Building Industry.
It provides the assessment and verification of constancy of performance of the products.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14209:2017(Main)
Preformed plasterboard cornices - Definitions, requirements and test methods
SIST EN 14209:2017

This European Standard specifies the characteristics and performance of preformed plasterboard cornices intended to be used in building construction works either as part of the original specification or subsequently for improved decorative enrichment of the wall/ceiling angle in rooms.
This standard covers the performance characteristics: reaction to fire and flexural strength.
This standard covers also additional technical characteristics that are of importance for the use and acceptance of the product by the Construction Industry and the reference tests for these characteristics.
It provides the assessment and verification of constancy of performance of the products.
This standard does not cover plain plaster and gypsum fibrous plasterwork cornices.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14195:2014(Main)
Metal framing components for gypsum board systems - Definitions, requirements and test methods
SIST EN 14195:2015

This European Standard specifies the characteristics of metal framing components (e.g. profiles, hangers and connectors) intended to be used in building construction works in conjunction with gypsum boards manufactured according to EN 520, EN 15283 1 and EN 15283 2 and gypsum board products from reprocessing conforming to EN 14190 where the assembly is non-loadbearing. Such assemblies include, for example, partitions, wall and ceiling linings, ceilings with mechanically fixed boards and the cladding of beams, columns, ducts and shafts.
It covers the following performance characteristics: reaction to fire, flexural (yield) strength and loadbearing capacity of suspension components to be measured according to the relevant test methods as specified or cited in this European Standard.

  • Standard
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14190:2014(Main)
Gypsum board products from reprocessing - Definitions, requirements and test methods
SIST EN 14190:2014

This European Standard specifies the characteristics and performance of products which have been produced by reprocessing gypsum boards manufactured according to EN 520, EN 15283 1 and EN 15283 2. Reprocessing may include cutting, perforating, edge profiling, decorating and laminating membranes of other materials for functional or decorative purposes, attaching fixings including supports e.g. for partitions. Examples of reprocessing operations are given in Annex B.
The products are intended for use in wall, ceiling and floor applications, where they may be fixed directly to the background, or they are used in systems assembled in conjunction with the structure to form separate or suspended linings. The products can be customized to fit the intended application offering a wide range of aesthetic, functional and decorative solutions of modular or non-modular design.
This European Standard does not cover gypsum board thermal/acoustic insulation composite panels according to EN 13950 and prefabricated gypsum board panels with a cellular paperboard core according to EN 13915.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13950:2014(Main)
Gypsum board thermal/acoustic insulation composite panels - Definitions, requirements and test methods
SIST EN 13950:2014

This European Standard specifies the characteristics and performance of thermal/acoustic insulation composite panels made of an insulating material laminated to gypsum boards for which the main intended use is the internal insulation (thermal and/or acoustic) of walls. They are attached with adhesives or by mechanical fixings to vertical solid backgrounds and by mechanical fixings to wood or metal framing with the gypsum board face exposed. The method of fixing and jointing should ensure that the insulating material is not exposed in its normal application.
This European Standard covers the following performance characteristics: reaction to fire, fire resistance, water vapour permeability, flexural strength, impact resistance, direct airborne sound insulation and thermal resistance to be measured according to the corresponding European test methods.
It provides for the assessment and verification of constancy of performance of the products to this European Standard.
This European Standard covers also additional technical characteristics that are of importance for the use and acceptance of the product by the construction industry.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13963:2014(Main)
Jointing materials for gypsum boards - Definitions, requirements and test methods
SIST EN 13963:2014

The European Standard specifies the requirements for jointing compounds and paper tapes used to fill and finish the joints formed at the edges and ends of gypsum plasterboards complying with EN 520, products from secondary processing complying with EN 14190, prefabricated gypsum plasterboard panels with a cellular paperboard core complying with EN 13915, thermal/acoustic composite panels complying with EN 13950, preformed plasterboard cornices complying with EN 14209 and gypsum boards with fibrous reinforcement complying with EN 15283 1 and EN 15283 2.
This European Standard does not cover tapes which are made from materials other than paper.
This European Standard covers the following characteristics: reaction to fire and flexural strength, to be measured according to the relevant test methods in this document.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day