EN 1366-10:2022+A1:2024
(Main)Fire resistance tests for service installations - Part 10: Smoke control dampers
Fire resistance tests for service installations - Part 10: Smoke control dampers
This document specifies test methods for smoke control dampers to assess their performance under elevated temperature or fire conditions, as well as at ambient temperatures.
Smoke control damper tests are used to confirm that the furnace testing requirements of EN 12101-8 are met and EN 12101-8 is for consideration before carrying out these tests.
Smoke control dampers tested to this document are expected to be classified using EN 13501-4 and this document is expected to be considered before carrying out these tests.
NOTE Some smoke control dampers to be tested might require testing following the information given in EN 1366-2 and this needs consideration before carrying out testing.
This document is expected to be read in conjunction with EN 12101-8, EN 13501-4, EN 1366-2 and EN 1363-1, the latter giving further details for fire resistance testing.
For installation details, the requirements for smoke extraction ducts are for consideration and these are defined in EN 1366-8 and EN 1366-9.
Feuerwiderstandsprüfungen für Installationen - Teil 10: Entrauchungsklappen
Dieses Dokument legt Prüfverfahren für Entrauchungsklappen zur Beurteilung ihrer Leistung bei erhöhten Temperaturen oder unter Brandbedingungen sowie unter Umgebungstemperaturen fest.
Prüfungen an Entrauchungsklappen werden durchgeführt, um zu beurteilen, ob die Brandschutzanforderungen nach EN 12101-8 erfüllt werden; EN 12101-8 ist vor der Durchführung dieser Prüfungen zu berücksichtigen.
Es wird davon ausgegangen, dass Entrauchungsklappen, die nach diesem Dokument geprüft wurden, nach EN 13501-4 klassifiziert werden. Dieses Dokument ist vor der Durchführung dieser Prüfungen zu berücksichtigen.
ANMERKUNG Einige der zu prüfenden Entrauchungsklappen erfordern möglicherweise eine Prüfung nach den Angaben in EN 1366-2, was vor der Durchführung der Prüfung berücksichtigt werden muss.
Dieses Dokument muss im Zusammenhang mit EN 12101-8, EN 13501-4, EN 1366 2 und EN 1363-1 betrachtet werden, wobei die letztgenannte Norm weitere Einzelheiten zur Prüfung des Feuerwiderstands angibt.
Einzelheiten zum Einbau von Entrauchungsleitungen, die zu berücksichtigen sind, sind in EN 1366-8 und EN 1366-9 festgelegt.
Essais de résistance au feu des installations techniques - Partie 10 : Volets de désenfumage
Le présent document spécifie des méthodes d’essai pour évaluer la performance des volets de désenfumage dans des conditions de température élevée ou d’incendie, ainsi qu’à température ambiante.
Les essais relatifs aux volets de désenfumage sont utilisés pour confirmer que les exigences d’essai de résistance au feu de l’EN 12101-8 sont satisfaites ; dans ce cas, l’EN 12101-8 est à prendre en compte avant de réaliser ces essais.
Il est attendu que les volets de désenfumage soumis aux essais conformément au présent document soient classés conformément à l’EN 13501-4 et que ce document soit pris en compte avant de réaliser les essais.
NOTE Certains volets de désenfumage à soumettre à essai peuvent exiger la réalisation des essais suivant les informations données dans l’EN 1366-2 et il est nécessaire de prendre cela en compte avant d’effectuer les essais.
Le présent document est destiné à être lu conjointement avec l’EN 12101-8, l’EN 13501-4, l’EN 1366-2 et l’EN 1363-1, cette dernière donnant des détails supplémentaires sur les essais de résistance au feu.
Pour les détails concernant l’installation, les exigences applicables aux conduits d’extraction de fumées sont à prendre en compte ; elles sont définies dans l’EN 1366-8 et l’EN 1366-9.
Preskusi požarne odpornosti servisnih inštalacij - 10. del: Dimne lopute (vključno z dopolnilom A1)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2024
Preskusi požarne odpornosti servisnih inštalacij - 10. del: Dimne lopute (vključno
z dopolnilom A1)
Fire resistance tests for service installations - Part 10: Smoke control dampers
Feuerwiderstandsprüfungen für Installationen - Teil 10: Entrauchungsklappen
Essais de résistance au feu des installations techniques - Partie 10 : Volets de
désenfumage
Ta slovenski standard je istoveten z: EN 1366-10:2022+A1:2024
ICS:
13.220.50 Požarna odpornost Fire-resistance of building
gradbenih materialov in materials and elements
elementov
91.060.40 Dimniki, jaški, kanali Chimneys, shafts, ducts
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN 1366-10:2022+A1
EUROPEAN STANDARD
NORME EUROPÉENNE
September 2024
EUROPÄISCHE NORM
ICS 13.220.50; 91.140.30 Supersedes EN 1366-10:2022
English Version
Fire resistance tests for service installations
- Part 10: Smoke control dampers
Essais de résistance au feu des installations techniques Feuerwiderstandsprüfungen für Installationen
- Partie 10 : Volets de désenfumage - Teil 10: Entrauchungsklappen
This European Standard was approved by CEN on 24 July 2022 and includes Amendment 1 approved by CEN on 14 July 2024.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATIO N
EUROPÄISCHES KOMITEE FÜR NORMUN G
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 1366-10:2022+A1:2024 E
worldwide for CEN national Members.
Contents Page
European foreword . 6
Introduction . 8
1 Scope . 9
2 Normative references . 9
3 Terms and definitions . 9
4 Test equipment . 12
4.1 General. 12
4.2 Test duct for surface mounted SCDs . 12
4.3 Connecting duct for compartment boundary mounted SCDs . 13
4.3.1 Compartmentation test . 13
4.3.2 Maintenance of opening test . 13
4.4 Cycling equipment . 13
4.5 Condensing unit . 13
4.6 Gas temperature measuring devices . 13
4.7 Exhaust fan system . 13
4.8 Perforated plate . 14
4.9 Volume and flow measurement for duct mounted SCDs . 14
4.10 Volume flow measurement for compartment boundary mounted SCDs . 14
4.10.1 Compartmentation test . 14
4.10.2 Maintenance of opening test . 14
4.11 Ambient leakage measurement equipment . 15
4.12 Pressure sensors for differential pressure control . 15
4.12.1 Duct mounted smoke control dampers . 15
4.12.2 Compartment boundary mounted smoke control dampers . 15
4.13 Welded connecting tube . 15
4.14 Extract fan connecting duct . 15
4.15 Extraction fan . 15
4.16 Thermocouples . 15
4.17 Oxygen measuring equipment . 15
4.18 Observation windows . 16
5 Test specimens . 16
5.1 Cross-section . 16
5.2 Design . 16
5.2.1 General. 16
5.2.2 Supporting constructions . 16
5.2.3 Inclusion of grilles . 17
6 Test methods . 17
6.1 General. 17
6.2 Test sequence . 17
6.3 Ambient leakage . 19
6.3.1 Units of the largest size . 19
6.3.2 Units of smallest size . 19
6.4 Cycling requirements . 19
6.4.1 General. 19
6.4.2 Smoke control damper to be used in dedicated smoke control systems, operated only
in the case of emergency . 19
6.4.3 Smoke control damper to be used as part of a general HVAC system as well as a smoke
control system, or as part of a smoke control systems that is cycled every day to check
operation . 19
6.4.4 Smoke control damper to be used as part of a general HVAC system as well as a smoke
control system, that uses a modulating actuator . 20
6.5 Selection of elevated temperature and fire resistance tests . 20
6.6 Fire resistance tests and elevated temperature tests . 21
6.6.1 Duct mounted smoke control dampers . 21
6.6.2 Compartment boundary mounted smoke control dampers . 22
6.6.3 Additional test information . 25
6.7 Initiation regime . 26
6.7.1 Smoke control dampers for systems with automatic activation (AA) . 26
6.7.2 Smoke control damper for systems with manual activation (MA) . 27
6.8 HOT400/30 extension test . 29
6.9 Special constructions . 29
7 Test procedure . 29
7.1 Fire resistance or elevated temperature and maintenance of opening test for duct
mounted smoke control dampers . 29
7.1.1 General . 29
7.1.2 Pre-test calibration . 29
7.1.3 Ignition of furnace . 31
7.1.4 Operate the damper . 31
7.1.5 Furnace conditions. 31
7.1.6 Thermocouples for insulation (I) . 31
7.1.7 Oxygen measurements . 32
7.1.8 General observations . 32
7.1.9 Reduction of cross-section/maintenance of opening . 32
7.1.10 Leakage calculations . 32
7.1.11 Termination of test . 32
7.2 Fire resistance tests for smoke control dampers mounted in a compartment boundary
................................................................................................................................................................... 33
7.2.1 General . 33
7.2.2 Pre-test calibration . 33
7.2.3 Ignition of furnace . 33
7.2.4 Operate the damper . 33
7.2.5 Furnace conditions. 33
7.2.6 Thermocouples for insulation (I) .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.