EN 12101-3:2002
(Main)Smoke and heat control systems - Part 3: Specification for powered smoke and heat exhaust ventilators
Smoke and heat control systems - Part 3: Specification for powered smoke and heat exhaust ventilators
This European standard specifies requirements and gives methods for testing powered smoke and heat exhaust ventilators that are intended to be installed as part of a powered smoke and heat exhaust ventilation system. It also provides a procedure for approving a range of powered smoke and heat exhaust ventilators and their motors, from a limited number of tests.
Rauch- und Wärmefreihaltung - Teil 3: Bestimmungen für maschinelle Rauch- und Wärmeabzugsgeräte
Dieser Teil von EN 12101 legt Anforderungen fest und beschreibt Prüfverfahren und das Zulassungsprogramm für eine Baureihe von Abzugsgeräten oder Motoren aufgrund einer Typprüfung für maschinelle Rauch- und Wärmeabzugsgeräte und ihre Motoren, die zum Installieren als Teil einer maschinellen Rauch- und Wärmeabzugsanlage nach prEN 12101-4 und prEN 12101-5 für Bauwerke vorgesehen sind, um im Falle eines Brandes Rauch und Wärme abzuführen. Die Norm prEN 12101-4 gibt die Normen für Bauteile, wie z.B. Kanäle, Klappen und Stromversorgungseinrichtungen, an.
Systèmes pour le contrôle des fumées et de la chaleur - Partie 3: Spécifications pour les ventilateurs extracteurs de fumées et de chaleur
La présente Norme européenne spécifie les exigences et donne les méthodes d'essais pour des ventilateurs extracteurs de fumées et de chaleur qui sont destinés à être installés comme composants dans un système de ventilation mécanique pour l'extraction de fumées et de chaleur. Il est également donné une procédure d'approbation d'une gamme de ventilateurs extracteurs de fumées et de chaleur ainsi que leurs moteurs à partir d'un nombre limité d'essais.
Sistemi za nadzor dima in toplote - 3. del: Specifikacije za električne ventilatorje za odvod dima in toplote
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Smoke and heat control systems - Part 3: Specification for powered smoke and heat exhaust ventilatorsSystemes pour le contrôle des fumées et de la chaleur - Partie 3: Spécifications pour les ventilateurs extracteurs de fumées et de chaleurRauch- und Wärmefreihaltung - Teil 3: Bestimmungen für maschinelle Rauch- und WärmeabzugsgeräteTa slovenski standard je istoveten z:EN 12101-3:2002SIST EN 12101-3:2002en23.12013.220.20ICS:SLOVENSKI
STANDARDSIST EN 12101-3:200201-junij-2002
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12101-3February 2002ICS 13.220.20; 23.120English versionSmoke and heat control systems - Part 3: Specification forpowered smoke and heat exhaust ventilatorsSystèmes pour le contrôle des fumées et de la chaleur -Partie 3: Spécifications pour les ventilateurs extracteurs defumées et de chaleurRauch- und Wärmefreihaltung - Teil 3: Bestimmungen fürmaschinelle Rauch- und WärmeabzugsgeräteThis European Standard was approved by CEN on 9 June 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12101-3:2002 E
EN 12101-3:2002 (E)2ContentspageForeword3Introduction41 Scope62 Normative references63 Terms and definitions74 Design requirements115 General testing procedures116 Performance requirements and classification127 Marking158 Evaluation of conformity15Annex A
(normative)
Type approval schedule for a range of ventilators17Annex B
(normative)
Type approval schedule for a product range of motors25Annex C
(normative)
Test method for performance of powered ventilators at hightemperature26Annex D
(normative)
Test method for resistance to temperature of electric motorsfor use in powered ventilators32Annex E
(normative)
Test method for operation under load36Annex ZA
(informative)
Clauses of this European Standard addressing essentialrequirements or other provisions of EU Directives38Bibliography42
EN 12101-3:2002 (E)3ForewordThis European Standard has been prepared by Technical Committee CEN/TC 191 "Fixed firefightingsystems", the secretariat of which is held by BSI.This European Standard shall be given the status of a national standard, either by publication of anidentical text or by endorsement, at the latest by August 2002, and conflicting national standards shallbe withdrawn at the latest by November 2003.This European Standard has been prepared under a mandate given to CEN by the EuropeanCommission and the European Free Trade Association, and supports essential requirements of EUDirective 89/106/EEC.For relationship with EU Directive(s), see informative annex ZA, which is an integral part of thisstandard.This European Standard is one of six parts of the European Standard prEN 12101 covering smoke andheat control systems.This European Standard has the general title Smoke and heat control systems and consists of thefollowing six parts:Part 1: Specification for smoke barriers — Requirements and test methodsPart 2: Specification for natural smoke and heat exhaust ventilatorsPart 3: Specification for powered smoke and heat exhaust ventilatorsPart 4: Natural smoke and heat exhaust ventilation systems — Installation and test methodsPart 5: Design and calculation for smoke and exhaust ventilation systems (published as CR 12101-5)Part 6: Design and calculation methods and installation procedure for pressure differential smokecontrol systemsprEN 12101 is included in a series of European Standards planned to cover also:- Gas extinguishing systems (EN 12094 and ISO 14520-1)- Sprinkler systems (EN 12259)- Powder systems (EN 12416)- Explosion protection systems (EN 26184)- Foam systems (EN 13565)- Hose systems (EN 671)- Water spray systemsThe annexes A to E are normative.According to the CEN/CENELEC Internal Regulations, the national standards organizations of thefollowing countries are bound to implemen
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.