EN 1366-2:2015

Fire resistance tests for service installations - Part 2: Fire dampers

This European Standard specifies a method for determining the fire resistance of fire dampers installed in fire separating elements designed to withstand heat and the passage of fire, smoke and gases at high temperature. This European Standard is used in conjunction with EN 1363-1.
This standard is not suitable for testing fire dampers in suspended ceilings.
This standard is not suitable for testing non-mechanical fire dampers (see EN 1366-12).

Feuerwiderstandsprüfungen für Installationen - Teil 2: Brandschutzklappen

Essais de résistance au feu des installations techniques - Partie 2 : Clapets résistant au feu

La présente Norme européenne prescrit une méthode pour déterminer la résistance au feu des clapets résistant au feu installés dans des éléments de séparation conçus pour résister à la chaleur et à la propagation du feu, des fumées et des gaz à haute température. La présente Norme européenne est utilisée conjointement avec
l'EN 1363-1.
La présente norme ne convient pas aux essais de clapets résistant au feu dans les plafonds suspendus.
La présente norme ne convient pas aux essais de clapets résistant au feu non mécaniques (voir EN 1366-12).

Preskusi požarne odpornosti servisnih inštalacij - 2. del: Požarne lopute

Ta del standarda EN 1366 določa metodo za ugotavljanje požarne odpornosti dušilnikov ognja, ki so nameščeni na požarnih ločevalnih elementih, zasnovanih, da vzdržijo vročino ter prehod ognja, dima in plinov pri visokih temperaturah. Ta standard se uporablja v povezavi s standardom EN 1363-1.
Ta standard ni primeren za preskušanje dušilnikov ognja v spuščenih stropih.
Ta standard ni primeren za preskušanje nemehanskih dušilnikov ognja (glejte EN 1366-12).

General Information

• Status: Published
• Publication Date: 23-Jun-2015
• Withdrawal Date: 30-Dec-2015
• ICS: 13.220.50 - Fire-resistance of building materials and elements
• Technical Committee: CEN/TC 127 - Fire safety in buildings
• Drafting Committee: CEN/TC 127/WG 2 - Services
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 03-Dec-2020
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Mandate: M/117 - Horizontal complement to the mandates to CEN/CENELEC concerning the execution of standardization work for the valuation of construction products and elements in respect of their resistance to fire
• Ref Project: SIST EN 1366-2:2015 - Fire resistance tests for service installations - Part 2: Fire dampers

Relations

• Replaces: EN 1366-2:1999 - Fire resistance tests for service installations - Part 2: Fire dampers
• Effective Date: 16-Apr-2014

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Preskusi požarne odpornosti servisnih inštalacij - 2. del: Požarne loputeFeuerwiderstandsprüfungen für Installationen - Teil 2: BrandschutzklappenEssais de résistance au feu des installations techniques - Partie 2: Clapet résistant au feuFire resistance tests for service installations - Part 2: Fire dampers13.220.50Požarna odpornost gradbenih materialov in elementovFire-resistance of building materials and elementsICS:Ta slovenski standard je istoveten z:EN 1366-2:2015SIST EN 1366-2:2015en,fr,de01-september-2015SIST EN 1366-2:2015SLOVENSKI
STANDARDSIST EN 1366-2:19991DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1366-2
June 2015 ICS 13.220.50 Supersedes EN 1366-2:1999English Version
Fire resistance tests for service installations - Part 2: Fire dampers
Essais de résistance au feu des installations techniques - Partie 2 : Clapets résistant au feu
Feuerwiderstandsprüfungen für Installationen - Teil 2: Brandschutzklappen This European Standard was approved by CEN on 3 April 2015.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1366-2:2015 ESIST EN 1366-2:2015
...