iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 1366-1:2014+A1:2020

(Main)

Fire resistance tests for service installations - Part 1: Ventilation ducts

Fire resistance tests for service installations - Part 1: Ventilation ducts

This Part of EN 1366 specifies a method for determining the fire resistance of vertical and horizontal ventilation ducts including those access panels, which are integral part of the tested ducts. The test examines the behaviour of ducts exposed to fire from the outside (duct A) and fire inside the duct (duct B). This Standard is used in conjunction with EN1363-1.
Annex A provides general guidance and gives background information.
This European Standard is not applicable to:
a)   ducts whose fire resistance depends on the fire resistance performance of a ceiling or wall(where ducts are located in cavities enclosed by fire-resistant shafts or ceilings);
b)   ducts containing fire dampers at points where they pass through fire separations;
c)   one, two or three sided ducts;
d)   fixing of suspension devices (e.g. anchors) to floors or walls.

Feuerwiderstandsprüfungen für Installationen - Teil 1: Lüftungsleitungen

Diese Europäische Norm legt ein Verfahren zur Bestimmung des Feuerwiderstands von vertikalen und hori¬zontalen Lüftungsleitungen, einschließlich Zugangsklappen, fest, die fester Bestandteil der zu prüfenden Leitungen sind. Die Prüfung untersucht das Verhalten von Leitungen, die Brandeinwirkung von außen (Leitung A) sowie Brandeinwirkung innerhalb der Leitung (Leitung B) ausgesetzt sind. Diese Europäische Norm wird in Zusammenhang mit EN 1363 1 angewendet.
Anhang A enthält eine allgemeine Anleitung und Hintergrundinformationen.
Diese Europäische Norm gilt nicht für:
a) Leitungen, deren Feuerwiderstand von der Feuerwiderstandsklasse einer Decke oder Wand abhängig ist (wobei Leitungen in Hohlräumen in feuerwiderstandsfähigen Schächten oder Decken eingeschlossen sind);
b) Leitungen mit Brandschutzklappen an den Durchführungsstellen von raumabschließenden Bauteilen;
c) ein-, zwei- oder dreiseitige Leitungen;
d) Befestigungsmittel von Abhängevorrichtungen (z. B. Anker) an Decken oder Wänden.

Essais de résistance au feu des installations techniques - Partie 1: Conduits de ventilation

La présente Norme européenne spécifie une méthode de détermination de la résistance au feu des conduits de ventilation horizontaux ou verticaux, y compris les trappes d’accès qui font partie intégrante des conduits soumis à l’essai. L’essai examine le comportement des conduits exposés au feu de l’extérieur (conduit A) et de l’intérieur (conduit B). La présente Norme européenne est utilisée conjointement avec l’EN 1363-1.
L’Annexe A donne des lignes directrices générales et des informations de base.
La présente Norme européenne n’est pas applicable :
a)   aux conduits dont la résistance au feu dépend de la performance de résistance au feu d’un plafond ou d’un mur (lorsque les conduits se trouvent à l’intérieur de cavités situées dans des gaines ou des plafonds résistant au feu) ;
b)   aux conduits comportant des clapets résistant au feu au niveau des cloisonnements coupe-feu ;
c)   aux conduits à un, deux ou trois côtés ;
d)   à la fixation des dispositifs de suspension (par exemple ancrages) aux planchers ou aux murs.

Preskusi požarne odpornosti servisnih inštalacij - 1. del: Ventilacijski kanali

General Information

Status
Published
Publication Date
11-Aug-2020
Withdrawal Date
27-Feb-2021
ICS
13.220.50 - Fire-resistance of building materials and elements
91.140.30 - Ventilation and air-conditioning systems
Technical Committee
CEN/TC 127 - Fire safety in buildings
Drafting Committee
CEN/TC 127/WG 2 - Services
Current Stage
9092 - Decision on results of review/2YR ENQ - revise - Review Enquiry
Completion Date
16-Sep-2022
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
Mandate
M/117 - Horizontal complement to the mandates to CEN/CENELEC concerning the execution of standardization work for the valuation of construction products and elements in respect of their resistance to fire
Ref Project
SIST EN 1366-1:2014+A1:2020 - Fire resistance tests for service installations - Part 1: Ventilation ducts

Relations

Merged From
EN 1366-1:2014/FprA1 - Fire resistance tests for service installations - Part 1: Ventilation ducts
Effective Date
11-May-2020
Merged From
EN 1366-1:2014 - Fire resistance tests for service installations - Part 1: Ventilation ducts
Effective Date
11-May-2020

Buy Standard

EN 1366-1:2014+A1:2020EN 1366-1:2014+A1:2020
PreviousNext
Standard
EN 1366-1:2014+A1:2020
English language
50 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 1366-1:2014+A1:2020
01-oktober-2020
Nadomešča:
SIST EN 1366-1:2014
Preskusi požarne odpornosti servisnih inštalacij - 1. del: Ventilacijski kanali
Fire resistance tests for service installations - Part 1: Ventilation ducts
Feuerwiderstandsprüfungen für Installationen - Teil 1: Lüftungsleitungen
Essais de résistance au feu des installations techniques - Partie 1: Conduits de
ventilation
Ta slovenski standard je istoveten z: EN 1366-1:2014+A1:2020
ICS:
13.220.50 Požarna odpornost Fire-resistance of building
gradbenih materialov in materials and elements
elementov
91.060.40 Dimniki, jaški, kanali Chimneys, shafts, ducts
SIST EN 1366-1:2014+A1:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 1366-1:2014+A1:2020

---------------------- Page: 2 ----------------------
SIST EN 1366-1:2014+A1:2020


EN 1366-1:2014+A1
EUROPEAN STANDARD

NORME EUROPÉENNE

August 2020
EUROPÄISCHE NORM
ICS 13.220.50; 91.140.30 Supersedes EN 1366-1:2014
English Version

Fire resistance tests for service installations - Part 1:
Ventilation ducts
Essais de résistance au feu des installations techniques Feuerwiderstandsprüfungen für Installationen - Teil 1:
- Partie 1: Conduits de ventilation Lüftungsleitungen
This European Standard was approved by CEN on 13 June 2014 and includes Amendment approved by CEN on 1 June 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 1366-1:2014+A1:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 1366-1:2014+A1:2020
EN 1366-1:2014+A1:2020 (E)
Contents Page
European foreword . 3
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 7
4 Test equipment . 7
5 Test conditions . 9
6 Test specimen . 9
7 Installation of test specimen . 12
8 Conditioning . 14
9 Application of instrumentation . 14
10 Test procedure .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 1366-10:2022(Main)
Fire resistance tests for service installations - Part 10: Smoke control dampers
SIST EN 1366-10:2022

This document specifies test methods for smoke control dampers to assess their performance under elevated temperature or fire conditions, as well as at ambient temperatures.
Smoke control damper tests are used to confirm that the furnace testing requirements of EN 12101-8 are met and EN 12101-8 is for consideration before carrying out these tests.
Smoke control dampers tested to this document are expected to be classified using EN 13501-4 and this document is expected to be considered before carrying out these tests.
NOTE   Some smoke control dampers to be tested might require testing following the information given in EN 1366-2 and this needs consideration before carrying out testing.
This document is expected to be read in conjunction with EN 12101-8, EN 13501-4, EN 1366-2 and EN 1363-1, the latter giving further details for fire resistance testing.
For installation details, the requirements for smoke extraction ducts are for consideration and these are defined in EN 1366-8 and EN 1366-9.

  • Standard
    100 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1366-12:2014+A1:2019(Main)
Fire resistance tests for service installations - Part 12: Non-mechanical fire barrier for ventilation ductwork
SIST EN 1366-12:2014+A1:2020

This part of EN 1366 specifies a method for determining the fire resistance of non-mechanical fire barriers installed in fire separating elements designed to withstand heat and the passage of smoke and gases at high temperature. This European Standard is used in conjunction with EN 1363-1 and EN 1366-2.
This European Standard is not suitable for testing non-mechanical fire barriers in suspended ceilings without modification.
This European Standard is not suitable for testing fire dampers, see EN 1366-2.
This European Standard is not suitable for testing such products as air transfer grilles, as the pressures and flows involved are different and may cause differing behaviour.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15882-1:2011+A1:2017(Main)
Extended application of results from fire resistance tests for service installations - Part 1: Ducts
SIST EN 15882-1:2012+A1:2018

This European Standard identifies parameters that affect the fire resistance of ducts for ventilation purposes. It also identifies the factors that need to be considered when deciding whether, or by how much a parameter can be extended either positively or negatively when contemplating the fire resistance on an untested variation in the construction.
This European Standard, where applicable, gives guidance on additional tests that are needed to extend the field of application.
The European Standard gives the principles behind how a conclusion on the influence of specific parameters/constructional details relating to the relevant criteria (E, I, S) can be achieved.
This European Standard only applies to ducts tested to EN 1366 1. Duct sections for use other than in fire resisting heating, ventilation and air conditioning (HVAC) systems are not covered by this European Standard. It does not cover ducts used for smoke control which are tested in accordance with EN 1366 8 or EN 1366 9.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 1366-15(Main)
Fire resistance tests for service installations - Part 15: 1-, 2-, 3- sided ducts
oSIST prEN 1366-15:2024

This Part of EN 1366 specifies a method for determining the fire resistance of horizontal 1-, 2- or 3-sided ventilation ducts and ducts whose fire resistance depends on the fire resistance performance of a ceiling or wall (where ducts are located in cavities enclosed by fire-resistant shafts or ceilings). The test examines the behaviour of ducts exposed to fire from the outside (duct A) and fire inside the duct (duct B). This Standard is used in conjunction with EN1363-1.
This test method does not take into consideration the effect of spalling or deflection of the adjoining floor/wall.
This test method is only applicable to ventilation ducts that have passed the test for the appropriate time period according to EN1366-1 (Duct A and B) in vertical and horizontal orientations.
The test specimens should not incorporate access panels, these are tested in accordance with EN1366-1.

  • Draft
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
FprEN 1366-9(Main)
Fire resistance tests for service installations - Part 9: Single compartment smoke extraction ducts
oSIST prEN 1366-9:2023

This part of EN 1366 specifies a test method for determining the fire resistance of smoke extraction ducts that are used for single compartment applications only. In such applications, the smoke extraction system is only intended to function up to flashover (typically 600 °C).
This method of test is only suitable for ducts constructed from non-combustible materials (class A1 and A2-s1, d0 according to EN 13501-1).
It is applicable only to four sided and circular ducts. One-, two- and three-sided ducts are not covered. This document is applicable only for the standard sizes or smaller as described.
This test method of part 9 is applicable only to smoke extraction ducts that do not pass into other fire compartments. For smoke extraction ducts that pass into other compartments, the method of test described in EN 1366-8 is used.
The smoke extraction duct is part of the smoke extraction system which also includes smoke control dampers and smoke extract fans.

  • Draft
    44 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1366-10:2022/FprA1(Amendment)
Fire resistance tests for service installations - Part 10: Smoke control dampers
SIST EN 1366-10:2022/oprA1:2023

This document specifies test methods for smoke control dampers to assess their performance under elevated temperature or fire conditions, as well as at ambient temperatures.
Smoke control damper tests are used to confirm that the furnace testing requirements of EN 12101-8 are met and EN 12101-8 is for consideration before carrying out these tests.
Smoke control dampers tested to this document are expected to be classified using EN 13501-4 and this document is expected to be considered before carrying out these tests.
NOTE   Some smoke control dampers to be tested might require testing following the information given in EN 1366-2 and this needs consideration before carrying out testing.
This document is expected to be read in conjunction with EN 12101-8, EN 13501-4, EN 1366-2 and EN 1363-1, the latter giving further details for fire resistance testing.
For installation details, the requirements for smoke extraction ducts are for consideration and these are defined in EN 1366-8 and EN 1366-9.

  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1366-1:2014/FprA1(Amendment)
Fire resistance tests for service installations - Part 1: Ventilation ducts
SIST EN 1366-1:2014/kFprA1:2020

This Part of EN 1366 specifies a method for determining the fire resistance of vertical and horizontal ventilation ducts including those access panels, which are integral part of the tested ducts. The test examines the behaviour of ducts exposed to fire from the outside (duct A) and fire inside the duct (duct B). This Standard is used in conjunction with EN1363-1.
Annex A provides general guidance and gives background information.
This European Standard is not applicable to:
a)   ducts whose fire resistance depends on the fire resistance performance of a ceiling or wall(where ducts are located in cavities enclosed by fire-resistant shafts or ceilings);
b)   ducts containing fire dampers at points where they pass through fire separations;
c)   one, two or three sided ducts;
d)   fixing of suspension devices (e.g. anchors) to floors or walls.

  • Draft
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1366-10:2011/FprA1(Amendment)
Fire resistance tests for service installations - Part 10: Smoke control dampers
SIST EN 1366-10:2011/kprA1:2016

This European Standard specifies test methods for smoke control dampers to assess their performance under elevated temperature or fire conditions.
It needs to be noted that the smoke control damper to be tested may require testing to EN 1366-2 and that this needs to be considered before carrying out these tests.
Smoke control damper tests are required to confirm that the furnace testing requirements of EN 12101-8 are met and EN 12101-8 needs to be considered before carrying out these tests.
Smoke control dampers tested to this European Standard should be classified using EN 13501-4 and this European Standard needs to be considered before carrying out these tests.
To this end this European Standard needs to be read in conjunction with EN 12101-8, EN 13501-4, EN 1366-2 and EN 1363-1, the latter giving further details for fire resistance testing.

  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1366-12:2014/prA1(Amendment)
Fire resistance tests for service installations - Part 12: Non-mechanical fire barrier for ventilation ductwork
SIST EN 1366-12:2014/oprA1:2019

This part of EN 1366 specifies a method for determining the fire resistance of non-mechanical fire barriers installed in fire separating elements designed to withstand heat and the passage of smoke and gases at high temperature. This European Standard is used in conjunction with EN 1363 1 and EN 1366 2.
This European Standard is not suitable for testing non-mechanical fire barriers in suspended ceilings without modification.
This European Standard is not suitable for testing fire dampers, see EN 1366 2.
This European Standard is not suitable for testing such products as air transfer grilles, as the pressures and flows involved are different and may cause differing behaviour.

  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15882-1:2011/FprA1:2017(Amendment)
Extended application of results from fire resistance tests for service installations - Part 1: Ducts
SIST EN 15882-1:2012/kprA1:2017

This European Standard identifies parameters that affect the fire resistance of ducts for ventilation purposes. It also identifies the factors that need to be considered when deciding whether, or by how much a parameter can be extended either positively or negatively when contemplating the fire resistance on an untested variation in the construction.
This European Standard, where applicable, gives guidance on additional tests that are needed to extend the field of application.
The European Standard gives the principles behind how a conclusion on the influence of specific parameters/constructional details relating to the relevant criteria (E, I, S) can be achieved.
This European Standard only applies to ducts tested to EN 1366-1. Duct sections for use other than in fire resisting heating, ventilation and air conditioning (HVAC) systems are not covered by this European Standard. It does not cover ducts used for smoke control which are tested in accordance with EN 1366-8 or EN 1366-9.

  • Draft
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day