EN ISO/IEC 25059:2024
(Main)Software engineering - Systems and software Quality Requirements and Evaluation (SQuaRE) - Quality model for AI systems (ISO/IEC 25059:2023)
Software engineering - Systems and software Quality Requirements and Evaluation (SQuaRE) - Quality model for AI systems (ISO/IEC 25059:2023)
This document outlines a quality model for AI systems and is an application-specific extension to the standards on SQuaRE. The characteristics and sub-characteristics detailed in the model provide consistent terminology for specifying, measuring and evaluating AI system quality. The characteristics and sub-characteristics detailed in the model also provide a set of quality characteristics against which stated quality requirements can be compared for completeness.
System- und Software-Engineering - Qualitätskriterien und Bewertung von Systemen und Softwareprodukten (SQuaRE) - Qualitätsmodell für KI-Systeme (ISO/IEC 25059:2023)
Ingénierie du logiciel - Exigences de qualité et évaluation des systèmes et du logiciel (SQuaRE) - Modèle de qualité pour les systèmes d'IA (ISO/IEC 25059:2023)
Programsko inženirstvo - Zahteve za kakovost in vrednotenje sistemov in programske opreme (SQuaRE) - Model kakovosti za sisteme UI (ISO/IEC 25059:2023)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2024
Programsko inženirstvo - Zahteve za kakovost in vrednotenje sistemov in
programske opreme (SQuaRE) - Model kakovosti za sisteme UI (ISO/IEC
25059:2023)
Software engineering - Systems and software Quality Requirements and Evaluation
(SQuaRE) - Quality model for AI systems (ISO/IEC 25059:2023)
System- und Software-Engineering - Qualitätskriterien und Bewertung von Systemen
und Softwareprodukten (SQuaRE) - Qualitätsmodell für KI-Systeme (ISO/IEC
25059:2023)
Ingénierie des systèmes et des logiciels - Critères de qualité et évaluation des systèmes
et des produits logiciels (SQuaRE) - Modèle de qualité pour les systèmes d’IA (ISO/IEC
25059:2023)
Ta slovenski standard je istoveten z: EN ISO/IEC 25059:2024
ICS:
35.080 Programska oprema Software
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN ISO/IEC 25059
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2024
ICS 35.080
English version
Software engineering - Systems and software Quality
Requirements and Evaluation (SQuaRE) - Quality model
for AI systems (ISO/IEC 25059:2023)
Ingénierie du logiciel - Exigences de qualité et System- und Software-Engineering - Qualitätskriterien
évaluation des systèmes et du logiciel (SQuaRE) - und Bewertung von Systemen und Softwareprodukten
Modèle de qualité pour les systèmes d'IA (ISO/IEC (SQuaRE) - Qualitätsmodell für KI-Systeme (ISO/IEC
25059:2023) 25059:2023)
This European Standard was approved by CEN on 1 August 2024.
CEN and CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for
giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical
references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to
any CEN and CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN and CENELEC member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN and CENELEC members are the national standards bodies and national electrotechnical committees of Austria, Belgium,
Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia,
Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and United Kingdom.
CEN-CENELEC Management Centre:
Rue de la Science 23, B-1040 Brussels
© 2024 CEN/CENELEC All rights of exploitation in any form and by any means
Ref. No. EN ISO/IEC 25059:2024 E
reserved worldwide for CEN national Members and for
CENELEC Members.
Contents Page
European foreword . 3
European foreword
The text of ISO/IEC 25059:2023 has been prepared by Technical Committee ISO/IEC JTC 1 "Information
technology” of the International Organization for Standardization (ISO) and has been taken over as
secretariat of which is held by DS.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by February 2025, and conflicting national standards
shall be withdrawn at the latest by February 2025.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN-CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN and CENELEC websites.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO/IEC 25059:2023 has been approved by CEN-CENELEC as EN ISO/IEC 25059:2024
without any modification.
INTERNATIONAL ISO/IEC
STANDARD 25059
First edition
2023-06
Software engineering — Systems and
software Quality Requirements and
Evaluation (SQuaRE) — Quality model
for AI systems
Reference number
ISO/IEC 25059:2023(E)
© ISO/IEC 2023
ISO/IEC 25059:2023(E)
© ISO/IEC 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
© ISO/IEC 2023 – All rights reserved
ISO/IEC 25059:2023(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
3.1 General . 1
3.2 Product quality . 2
3.3 Quality in use . 3
4 Abbreviated terms . 3
5 Product quality model .3
5.1 General . 3
5.2 User controllability . 4
5.3 Functional adaptability. 4
5.4 Functional correctness . 4
5.5 Robustness . 4
5.6 Transparency . 5
5.7 Intervenability . 5
6 Quality in use model .6
6.1 General . 6
6.2 Societal and ethical risk mitigation . 6
6.3 Transparency . 7
Annex A (informative) SQuaRE. 8
Annex B (informative) How a risk-based approach relates to a quality-based approach and
quality models .10
Annex C (informative) Performance .13
Bibliography .14
iii
© ISO/IEC 2023 – All rights reserved
ISO/IEC 25059:2023(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are
members of ISO or IEC participate in the development of International Standards through technical
committees established by the respective organization to deal with particular fields of technical
activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international
organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the
work.
The procedures used to develop this document and those intended for its further maintenance
are described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria
needed for the different types of document should be noted. This document was drafted in
accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives or
www.iec.ch/members_experts/refdocs).
ISO and IEC draw attention to the possibility that the implementation of this document may involve the
use of (a) patent(s). ISO and IEC take no position concerning the evidence, validity or applicability of
any claimed patent rights in respect thereof. As of the date of publication of this document, ISO and IEC
had not received notice of (a) patent(s) which may be required to implement this document. However,
implementers are cautioned that this may not represent the latest information, which may be obtained
from the patent database available at www.iso.org/patents and https://patents.iec.ch. ISO and IEC shall
not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to
the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see
www.iso.org/iso/foreword.html. In the IEC, see www.iec.ch/understanding-standards.
This document was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology,
Subcommittee SC 42, Artificial intelligence.
Any feedback or questions on this document should be directed to the user’s national standards
body. A complete listing of these bodies can be found at www.iso.org/members.html and
www.iec.ch/national-committees.
iv
© ISO/IEC 2023 – All rights reserved
ISO/IEC 25059:2023(E)
Introduction
High-quality software products and computer syst
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.