iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 14908-3:2006

(Main)

Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 3: Power Line Channel Specification

Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 3: Power Line Channel Specification

This European Standard specifies all the information necessary to facilitate the exchange of data and control information over the power line medium.
This European Standard establishes a minimal set of rules for compliance. It does not rule out extended services to be provided, given that the rules are adhered to within the system. It is the intention of the standard to permit extended services (defined by users) to coexist.
Certain aspects of the standard are defined in other documents. These documents are referenced where relevant. In the case where a referenced standard conflicts with this European Standard, this European Standard will prevail.

Firmenneutrale Datenkommunikation für die Gebäudeautomation und Gebäudemanagement - Gebäude Netzwerk Protokoll - Teil 3: Kommunikation über die Stromversorgungsleitungen

Réseau ouvert de communication de données pour l'automatisation, la régulation et la gestion technique du bâtiment - Protocole de réseau pour le bâtiment - Partie 3: Spécification des communications pour courants porteurs

La présente Norme européenne spécifie toute l'information nécessaire pour faciliter l'échange de données et l'information de contrôle du protocole sur le médium réseau de puissance.
La présente Norme européenne établit un ensemble minimum de règles pour la conformité. Elle n'exclut pas les services supplémentaires à fournir, pour autant que ces règles soient associées au domaine du système. Il est prévu que cette norme permette aux extensions de services (définies par l'utilisateur) de coexister.
Certains aspects de la norme sont définis dans d'autres documents. Ces documents sont référencés autant que de besoin. Dans le cas où une norme référencée entre en contradiction avec la présente Norme européenne, cette dernière prévaut.

Odprta izmenjava podatkov v avtomatizaciji stavb in izvršnih elementov ter pri upravljanju stavb - Protokol regulacijske mreže - 3. del: Specifikacija kanala močnostnega napajanja

General Information

Status
Withdrawn
Publication Date
31-Oct-2006
Withdrawal Date
29-Apr-2014
ICS
35.240.67 - IT applications in building and construction industry
35.240.99 - IT applications in other fields
91.140.01 - Installations in buildings in general
97.120 - Automatic controls for household use
Technical Committee
CEN/TC 247 - Controls for mechanical building services
Drafting Committee
CEN/TC 247/WG 4 - Open System Data Transmission
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
30-Apr-2014
Completion Date
30-Apr-2014
Mandate
M/490 - Standardisation mandate to the European Standardisation Organisations (ESOs) to support European Smart Grid deployment
Ref Project
SIST EN 14908-3:2007 - Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 3: Power Line Channel Specification

Relations

Replaced By
EN 14908-3:2014 - Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 3: Power Line Channel Specification
Effective Date
07-May-2014

Buy Standard

EN 14908-3:2007EN 14908-3:2007
PreviousNext
Standard
EN 14908-3:2007
English language
15 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 3: Power Line Channel SpecificationRéseau ouvert de communication de données pour l'automatisation, la régulation et la gestion technique du bâtiment - Protocole de réseau pour le bâtiment - Partie 3: Spécification des communications pour courants porteursFirmenneutrale Datenkommunikation für die Gebäudeautomation und Gebäudemanagement - Gebäude Netzwerk Protokoll - Teil 3: Kommunikation über die StromversorgungsleitungenTa slovenski standard je istoveten z:EN 14908-3:2006SIST EN 14908-3:2007en97.120Avtomatske krmilne naprave za domAutomatic controls for household use35.240.99IT applications in other fieldsICS:SLOVENSKI
STANDARDSIST EN 14908-3:200701-februar-2007

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14908-3November 2006ICS 35.240.99; 97.120 English VersionOpen Data Communication in Building Automation, Controls andBuilding Management - Control Network Protocol - Part 3: PowerLine Channel SpecificationRéseau ouvert de communication de données pourl'automatisation, la régulation et la gestion technique dubâtiment - Protocole de réseau pour le bâtiment - Partie 3:Spécification des communications pour courants porteursFirmenneutrale Datenkommunikation für dieGebäudeautomation und Gebäudemanagement - GebäudeNetzwerk Protokoll - Teil 3: Kommunikation über dieStromversorgungsleitungenThis European Standard was approved by CEN on 11 September 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14908-3:2006: E

EN 14908-2 (Twisted Pair)EN 14908-3 (Power-Line)EN 14908-4 (IP Communication)• ••Scope of this European Standard
Figure 1 — Relationship of CNP 3 Specification to the CNP 1 Specification Model

installations in the frequency range 3 kHz
to 148, 5 kHz — Part 1: General
requirements, frequency bands and
electromagnetic disturbances EN 50065-2-1, Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz —
Part 2-1: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for use in residential, commercial and light industrial environments EN 50065-2-2, Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz — Part 2-2: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for use in industrial environments 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 14908-1:2005 and the following, specifically with the power line medium and physical layer shown in Figure 1, apply. 3.1 PL Node user node attached to the power line medium at a tap that meets the requirements of this specification 3.2 Line Cord cable not part of the power line network that allows a node located away from the power line network to be connected to the network 3.3 Power Line Network communication network based on power distribution lines (“power lines”), from the final distribution transformer to and including all homes served by that transformer, including all wiring in those homes 3.4 Non-Network-Powered Node compatible node that attaches to the power line network but does not draw any power from the network
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 14908-3:2014(Main)
Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 3: Power Line Channel Specification
SIST EN 14908-3:2014

This European Standard specifies all the information necessary to facilitate the exchange of data and control information over the power line medium for networked control systems in commercial Building Automation, Controls and Building Management.
This European Standard establishes a minimal set of rules for compliance. It does not rule out extended services to be provided, given that the rules are adhered to within the system. It is the intention of the standard to permit extended services (defined by users) to coexist.
Certain aspects of this standard are defined in other documents. These documents are referenced where relevant. In the case where a referenced standard conflicts with this European Standard, this part of EN 14908 will prevail.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14908-2:2014(Main)
Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 2: Twisted Pair Communication
SIST EN 14908-2:2014

This European Standard specifies the control network protocol (CNP) free-topology twisted-pair channel for networked control systems in commercial Building Automation, Controls and Building Management and is used in conjunction with EN 14908-1:2014. The channel supports communication at 78,125 kbit/s between multiple nodes, each of which consists of a transceiver, a protocol processor, an application processor, a power supply, and application electronics.
This European Standard covers the complete physical layer (OSI Layer 1), including the interface to the Media Access Control (MAC) sub-layer and the interface to the medium. Parameters that are controlled by other layers but control the operation of the physical layer are also specified.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14908-1:2014(Main)
Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 1: Protocol Stack
SIST EN 14908-1:2014

This European Standard applies to a communication protocol for networked control systems in commercial Building Automation, Controls and Building Management. The protocol provides peer-to-peer communication for networked control and is suitable for implementing both peer-to-peer and master-slave control strategies. This specification describes services in layers 2 to 7. In the layer 2 (data link layer) specification, it also describes the MAC sub-layer interface to the physical layer. The physical layer provides a choice of transmission media. The interface described in this specification supports multiple transmission media at the physical layer. In the layer 7 specification, it includes a description of the types of messages used by applications to exchange application and network management data.

  • Standard
    415 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14908-4:2014(Main)
Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 4: IP Communication
SIST EN 14908-4:2014

This European Standard specifies the transporting of the Control Network Protocol (CNP) packets for commercial Building Automation, Controls and Building Management over Internet Protocol (IP) networks using a tunnelling mechanism wherein the CNP packets are encapsulated within IP packets. It applies to both CNP nodes and CNP routers.
The purpose of this European Standard is to ensure interoperability between various CNP devices that wish to use IP networks to communicate using the CNP protocol.
The main body of this European Standard is independent of the CNP protocol being transported over the IP network. The reader is directed to Annex A and Annex B for the normative and informative, respectively, aspects of this specification that are specific to EN 14908-1.
Figure 1 shows a possible configuration of such CNP devices and networks connected to an IP network.
Figure 1 depicts two types of CNP devices: CNP nodes and CNP routers. It should be noted that the routers shown can route packets between typical CNP channels (such as twisted pair or power line) and an IP channel or it can route CNP packets between two IP channels. In this European Standard the IP channel will be defined in such a way to allow it to be used like any other CNP channel.
In the above diagram, the IP network can be considered to be one or more IP channels. This European Standard covers only how CNP packets are transported over IP channels. It does not cover how CNP packets are routed between standard CNP channels and IP channels. This specification is not intended to cover the lower layers (physical, MAC and link layers) of either standard CNP or IP channels.

  • Standard
    62 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14908-5:2009(Main)
Open Data Communication in Building Automation, Controls and Building Management Implementation Guideline - Control Network Protocol - Part 5: Implementation
SIST EN 14908-5:2009

This specification contains all the information necessary to facilitate the exchange of data and control information in an interoperable fashion using EN 14908-1 and its associated data-transport media specifications.
This specification establishes a minimal set of rules for compliance. It does not rule-out extended services to be provided, given that the rules are adhered-to within the system. It is the intention of the standard to permit extended services to coexist and defines the bounds in which those services function, including the format for internal device-documentation of those services. Services outside purvey of this specification so long as they are adherents of the system are permitted but will not necessarily be interoperable with any other devices and shall not be essential for the functioning of the device.
Certain aspects of this standard are defined in other documents. These documents are referenced where relevant. In the case where a referenced standard conflicts with this document, this document will prevail.

  • Standard
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN ISO 16484-2(Main)
Building Automation and Control Systems (BACS) - Part 2: Hardware
oSIST prEN ISO 16484-2:2016

This European Standard specifies the requirements of hardware and functions for products and systems for the control and management of the HVAC processes (Building Control and Automation System BAC), and provides for the integration of non HVAC processes.

  • Draft
    71 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14908-3:2014(Main)
Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 3: Power Line Channel Specification
SIST EN 14908-3:2014

This European Standard specifies all the information necessary to facilitate the exchange of data and control information over the power line medium for networked control systems in commercial Building Automation, Controls and Building Management.
This European Standard establishes a minimal set of rules for compliance. It does not rule out extended services to be provided, given that the rules are adhered to within the system. It is the intention of the standard to permit extended services (defined by users) to coexist.
Certain aspects of this standard are defined in other documents. These documents are referenced where relevant. In the case where a referenced standard conflicts with this European Standard, this part of EN 14908 will prevail.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14908-2:2014(Main)
Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 2: Twisted Pair Communication
SIST EN 14908-2:2014

This European Standard specifies the control network protocol (CNP) free-topology twisted-pair channel for networked control systems in commercial Building Automation, Controls and Building Management and is used in conjunction with EN 14908-1:2014. The channel supports communication at 78,125 kbit/s between multiple nodes, each of which consists of a transceiver, a protocol processor, an application processor, a power supply, and application electronics.
This European Standard covers the complete physical layer (OSI Layer 1), including the interface to the Media Access Control (MAC) sub-layer and the interface to the medium. Parameters that are controlled by other layers but control the operation of the physical layer are also specified.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14908-1:2014(Main)
Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 1: Protocol Stack
SIST EN 14908-1:2014

This European Standard applies to a communication protocol for networked control systems in commercial Building Automation, Controls and Building Management. The protocol provides peer-to-peer communication for networked control and is suitable for implementing both peer-to-peer and master-slave control strategies. This specification describes services in layers 2 to 7. In the layer 2 (data link layer) specification, it also describes the MAC sub-layer interface to the physical layer. The physical layer provides a choice of transmission media. The interface described in this specification supports multiple transmission media at the physical layer. In the layer 7 specification, it includes a description of the types of messages used by applications to exchange application and network management data.

  • Standard
    415 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14908-4:2014(Main)
Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 4: IP Communication
SIST EN 14908-4:2014

This European Standard specifies the transporting of the Control Network Protocol (CNP) packets for commercial Building Automation, Controls and Building Management over Internet Protocol (IP) networks using a tunnelling mechanism wherein the CNP packets are encapsulated within IP packets. It applies to both CNP nodes and CNP routers.
The purpose of this European Standard is to ensure interoperability between various CNP devices that wish to use IP networks to communicate using the CNP protocol.
The main body of this European Standard is independent of the CNP protocol being transported over the IP network. The reader is directed to Annex A and Annex B for the normative and informative, respectively, aspects of this specification that are specific to EN 14908-1.
Figure 1 shows a possible configuration of such CNP devices and networks connected to an IP network.
Figure 1 depicts two types of CNP devices: CNP nodes and CNP routers. It should be noted that the routers shown can route packets between typical CNP channels (such as twisted pair or power line) and an IP channel or it can route CNP packets between two IP channels. In this European Standard the IP channel will be defined in such a way to allow it to be used like any other CNP channel.
In the above diagram, the IP network can be considered to be one or more IP channels. This European Standard covers only how CNP packets are transported over IP channels. It does not cover how CNP packets are routed between standard CNP channels and IP channels. This specification is not intended to cover the lower layers (physical, MAC and link layers) of either standard CNP or IP channels.

  • Standard
    62 pages
    English language
    sale 10% off
    e-Library read for
    1 day