iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

CEN/TR 16303-4:2012

(Main)

Road restraint systems - Guidelines for computational mechanics of crash testing against vehicle restraint system - Part 4: Validation Procedures

Road restraint systems - Guidelines for computational mechanics of crash testing against vehicle restraint system - Part 4: Validation Procedures

The aim of this part is to provide a methodology for the validation of the simulation performed to demonstrate compliance with the essential requirements for CE marking. The use of computational mechanics in the approval process for CE market of a test item is defined and regulated within EN 1317.

Rückhaltesysteme an Straßen - Richtlinien für Computersimulationen von Anprallprüfungen an Fahrzeug-Rückhaltesysteme - Teil 4: Validierungsverfahren

Ziel dieses Teils ist es, Methoden der Validierung für die durchgeführte Simulation von Anprallprüfungen zum Nachweis der Übereinstimmung mit den wesentlichen Anforderungen für die CE-Kennzeichnung festzulegen. Die Anwendung von Computersimulationen im Nachweisverfahren für die CE-Kennzeichnung ist in EN 1317 festgelegt und geregelt.

Dispositifs de retenue routiers - Recommandations pour la simulation numérique d'essai de choc sur des dispositifs de retenue des véhicules - Partie 4: Procédures de validation

La présente partie a pour but de fournir une méthodologie pour la validation de la simulation accomplie pour
démontrer la conformité aux exigences essentielles du marquage CE. L'utilisation de simulations numériques
dans le processus d'approbation pour le marché CE d'un élément d'essai est définie et régulée dans
l'EN 1317.

Oprema cest - Smernice za računalniške simulacije preskusnih trčenj v sisteme za zadrževanje vozil - 4. del: Validacija postopka

Ta del je namenjen zagotovitvi metodologije za validacijo izvedene simulacije, s katero se dokaže skladnost z bistvenimi zahtevami za označbo CE. Uporabo računalniške mehanike pri postopku odobritve preskusnega vzorca za trg CE določa in ureja standard EN 1317.

General Information

Status
Withdrawn
Publication Date
17-Jan-2012
Withdrawal Date
04-Aug-2020
ICS
13.200 - Accident and disaster control
93.080.30 - Road equipment and installations
Technical Committee
CEN/TC 226 - Road equipment
Drafting Committee
CEN/TC 226/WG 1 - Crash barriers, safety fences, guard rails and bridge parapets
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
05-Aug-2020
Ref Project
SIST-TP CEN/TR 16303-4:2012 - Road restraint systems - Guidelines for computational mechanics of crash testing against vehicle restraint system - Part 4: Validation Procedures

Relations

Replaced By
EN 16303:2020 - Road restraint systems - Validation and verification process for the use of virtual testing in crash testing against vehicle restraint system
Effective Date
24-Jun-2015

Buy Standard

TP CEN/TR 16303-4:2012TP CEN/TR 16303-4:2012
PreviousNext
Technical report
TP CEN/TR 16303-4:2012
English language
16 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TP CEN/TR 16303-4:2012
01-marec-2012
2SUHPDFHVW6PHUQLFH]DUDþXQDOQLãNHVLPXODFLMHSUHVNXVQLKWUþHQMYVLVWHPH]D
]DGUåHYDQMHYR]LOGHO9DOLGDFLMDSRVWRSND
Road restraint systems - Guidelines for computational mechanics of crash testing against
vehicle restraint system - Part 4: Validation Procedures
Rückhaltesysteme an Straßen - Richtlinien für Computersimulationen von
Anprallprüfungen an Fahrzeug-Rückhaltesysteme - Teil 4: Validierungsverfahren
Dispositifs de retenue routiers - Recommandations pour la simulation numérique d'essai
de choc sur des dispositifs de retenue des véhicules - Partie 4: Procédures de validation
Ta slovenski standard je istoveten z: CEN/TR 16303-4:2012
ICS:
13.200 3UHSUHþHYDQMHQHVUHþLQ Accident and disaster control
NDWDVWURI
93.080.30 Cestna oprema in pomožne Road equipment and
naprave installations
SIST-TP CEN/TR 16303-4:2012 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST-TP CEN/TR 16303-4:2012

---------------------- Page: 2 ----------------------

SIST-TP CEN/TR 16303-4:2012


TECHNICAL REPORT
CEN/TR 16303-4

RAPPORT TECHNIQUE

TECHNISCHER BERICHT
January 2012
ICS 13.200; 93.080.30
English Version
Road restraint systems - Guidelines for computational
mechanics of crash testing against vehicle restraint system -
Part 4: Validation Procedures
Dispositifs de retenue routiers - Recommandations pour la Rückhaltesysteme an Straßen - Richtlinien für
simulation numérique d'essai de choc sur des dispositifs Computersimulationen von Anprallprüfungen an Fahrzeug-
de retenue des véhicules - Partie 4: Procédures de Rückhaltesysteme - Teil 4: Validierungsverfahren
validation


This Technical Report was approved by CEN on 7 November 2011. It has been drawn up by the Technical Committee CEN/TC 226.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TR 16303-4:2012: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST-TP CEN/TR 16303-4:2012
CEN/TR 16303-4:2012 (E)

Contents
Foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 General . 5
4 Validation Process . 6
5 Standard report and Output parameters . 9
Annex A Validation report . 10
Bibliography . 16

2

---------------------- Page: 4 ----------------------

SIST-TP CEN/TR 16303-4:2012
CEN/TR 16303-4:2012 (E)
Foreword
This document (CEN/TR 16303-4:2012) has been prepared by Technical Committee CEN/TC 226 “Road
equipment”, the secretariat of which is held by AFNOR.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document consists of this document divided in five Parts under the general title: Guidelines for
Computational Mechanics of Crash Testing against Vehicle Restraint System:
 Part 1: Common reference information and reporting
 Part 2: Vehicle Modelling and Verification
 Part 3: Test Item Model
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
CEN/TS 1317-9:2023(Main)
Road restraint systems - Part 9: Impact tests and test methods for removable barrier sections
SIST-TS CEN/TS 1317-9:2024

This document specifies performance, categories and test methods for the assessment of removable barrier sections.
The transitions between the Removable Barrier Section and the two connected safety barriers are outside the scope of this document
and should be assessed according to CEN/TR Transitions: _.
The present document should be read in conjunction with EN 1317-1:2010 and EN 1317-2 2:2010 and EN 1317-5:2007+A2:2012

  • Technical specification
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Technical specification
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 1317-10:2023(Main)
Road restraint systems - Part 10: Assessment methods and design guidelines for transitions, terminal and crash cushion connection - transitions
SIST-TP CEN/TR 1317-10:2024

This Technical Report defines assessment methods for transitions, considered as the linkage between safety barriers or between
safety barriers and removable barrier sections defined by CEN/TS RBS.
This Technical Report also defines assessment methods for connection-transitions to terminals and crash cushions.
Road Authorities and regulatory authorities are free to determine assessment methods, values, measurements etc. and to fix the
details of the requirements.
Assessment methods and design rules can also be utilised in connection to evaluation of changed versions.

  • Technical report
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Technical report
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16303:2020(Main)
Road restraint systems - Validation and verification process for the use of virtual testing in crash testing against vehicle restraint system
SIST EN 16303:2020

This document defines the accuracy, credibility and confidence in the results of virtual crash test to vehicle restraint systems through the definition of procedures for verification, validation and development of numerical models for roadside safety application. Finally it defines a list of indications to ensure the competences of an expert/organization in the domain of virtual testing.

  • Standard
    85 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 17342:2019(Main)
Road restraint systems - Motorcycle road restraint systems which reduce the impact severity of motorcyclist collisions with safety barriers
SIST-TS CEN/TS 17342:2019

This document specifies requirements for the impact performance of systems designed for the reduction of impact severity for PTW riders impacting safety barriers whilst sliding along the ground, having fallen from their PTW vehicle. The protection systems concerned are those fitted to barriers or barriers that have an inherent PTW rider protection or risk reduction capability. This document excludes the assessment of the vehicle restraint capabilities of barriers and the risk that they represent to the occupants of impacting cars. The assessment of barrier performance with respect to impacting vehicles is covered by EN 1317-1 and EN 1317-2.
This document defines performance classes taking into account rider speed classes, impact severity and the working width of the system with respect to rider impacts.
For systems designed to be added to a standard barrier, the test results are valid only when the system is fitted to the model of barrier used in the tests since the performance will not necessarily be the same if the system is fitted to a different barrier.

  • Technical specification
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 16949:2016(Main)
Road restraint system - Pedestrian restraint system - Pedestrian parapets
SIST-TP CEN/TR 16949:2016

This Technical Report specifies geometrical and technical requirements for the design and manufacture for pedestrian parapets on road bridges, on footbridges, on top of retaining walls and on similar elevated structures.
This Technical Report also specifies test methods and provision for the labelling and marking of these products.
This Technical Report does not cover:
—   vehicle restraint systems;
—   pedestrian restraint systems in residential, commercial or industrial buildings and within their perimeter;
—   non-rigid rails i.e. rope, cables.
This Technical Report may be used for pedestrian parapets on structures which cross over railways, rivers and canals.

  • Technical report
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1317-5:2007+A2:2012/AC:2012(Corrigendum)
Road restraint systems - Part 5: Product requirements and evaluation of conformity for vehicle restraint systems
SIST EN 1317-5:2007+A2:2012/AC:2012

This European Standard specifies requirements for evaluation of conformity of the following vehicle restraint systems:
a)   safety barriers;
b)   crash cushions;
c)   terminals (will be effective when ENV 1317-4 becomes an EN);
d)   transitions (will be effective when ENV 1317-4 becomes an EN);
e)   vehicle / pedestrian parapets (only for the vehicle restraint function).
Pedestrian parapet requirements are not covered in this document.
Requirements for the evaluation of durability with respect to weathering are included in this document.
Requirements for other forms of durability (e.g. marine environment, sand abrasion) are not included.
Temporary barriers are not within the scope of this document.

  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1317-5:2007+A2:2012(Main)
Road restraint systems - Part 5: Product requirements and evaluation of conformity for vehicle restraint systems
SIST EN 1317-5:2007+A2:2012

This European Standard specifies requirements for evaluation of conformity of the following vehicle restraint systems:
a)   safety barriers;
b)   crash cushions;
c)   terminals (will be effective when ENV 1317-4 becomes an EN);
d)   transitions (will be effective when ENV 1317-4 becomes an EN);
e)   vehicle / pedestrian parapets (only for the vehicle restraint function).
Pedestrian parapet requirements are not covered in this document.
Requirements for the evaluation of durability with respect to weathering are included in this document.
Requirements for other forms of durability (e.g. marine environment, sand abrasion) are not included.
Temporary barriers are not within the scope of this document.

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1317-2:2010(Main)
Road restraint systems - Part 2: Performance classes, impact test acceptance criteria and test methods for safety barriers including vehicle parapets
SIST EN 1317-2:2010

This European Standard specifies requirements on impact performance of safety barriers, including vehicle parapets, classes of containment, working width, vehicle intrusion and impact severity levels.
NOTE   This European Standard should be read in conjunction with EN 1317-1. Both these standards support EN 1317-5.
The modifications included in standard are not a change of test criteria, in the sense of the EN 1317-5:2007, ZA.3.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1317-3:2010(Main)
Road restraint systems - Part 3: Performance classes, impact test acceptance criteria and test methods for crash cushions
SIST EN 1317-3:2010

This European Standard specifies requirements for the performance of crash cushions during vehicle impacts. It specifies performance classes and acceptance criteria for impact tests, which should be read in conjunction with EN 1317-1 and EN 1317-5.
The modifications included in this European Standard are not a change of test criteria, in the sense of EN 1317-5:2007, ZA.3.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1317-1:2010(Main)
Road restraint systems - Part 1: Terminology and general criteria for test methods
SIST EN 1317-1:2010

This European Standard contains provisions for the measurement of performance of products for the road restraint systems, under impact and impact severity levels, and includes:
-   Test site data;
-   Definitions for road restraint systems;
-   Vehicle specification (including loading requirements) for vehicles used in the impact tests;
-   Instrumentation for the vehicles;
-   Calculation procedures and methods of recording crash impact data including impact severity levels;
-   VCDI.
The modifications included in this standard are not a change of test criteria, in the sense of EN 1317-5:2007, ZA.3.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day