Earth-moving machinery - Physical dimensions of operators and minimum operator space envelope (ISO 3411:2007)

ISO 3411:2007 provides the dimensions of operators of earth-moving machinery as defined in ISO 6165 and specifies the minimum normal operating space envelope within the operator enclosures.

Erdbaumaschinen - Körpermaße von Maschinenführer und Mindestfreiraum (ISO 3411:2007)

Diese Internationale Norm legt die Maße von Maschinenführern von Erdbaumaschinen fest, wie in ISO 6165 definiert, und spezifiziert den üblichen Mindestfreiraum in der Maschinenführerkabine.
Diese Norm ist nicht anwendbar bei Maschinen, die vor dem Datum der Veröffentlichung hergestellt wurden.

Engins de terrassement - Dimensions des opérateurs et espace enveloppe minimal pour les opérateurs (ISO 3411:2007)

L'ISO 3411:2007 fournit les dimensions des opérateurs d'engins de terrassement définis dans l'ISO 6165 et spécifie l'espace enveloppe normal minimal autour de l'opérateur dans les postes de travail.

Stroji za zemeljska dela - Telesne mere upravljavca in najmanjša velikost upravljavčevega prostora (ISO 3411:2007)

General Information

Status
Published
Publication Date
14-Jul-2007
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Due Date
15-Jul-2007
Completion Date
15-Jul-2007

RELATIONS

Buy Standard

Standard
EN ISO 3411:2008
English language
19 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN ISO 3411:2008
01-marec-2008
1DGRPHãþD
SIST EN ISO 3411:2000
6WURML]D]HPHOMVNDGHOD7HOHVQHPHUHXSUDYOMDYFDLQQDMPDQMãDYHOLNRVW
XSUDYOMDYþHYHJDSURVWRUD ,62
Earth-moving machinery - Physical dimensions of operators and minimum operator
space envelope (ISO 3411:2007)
Erdbaumaschinen - Körpermaße von Maschinenführer und Mindestfreiraum (ISO
3411:2007)

Engins de terrassement - Dimensions des opérateurs et espace enveloppe minimal pour

les opérateurs (ISO 3411:2007)
Ta slovenski standard je istoveten z: EN ISO 3411:2007
ICS:
53.100
SIST EN ISO 3411:2008 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
EUROPEAN STANDARD
EN ISO 3411
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2007
ICS 53.100 Supersedes EN ISO 3411:1999
English Version
Earth-moving machinery - Physical dimensions of operators and
minimum operator space envelope (ISO 3411:2007)

Engins de terrassement - Dimensions des opérateurs et Erdbaumaschinen - Körpermaße von Maschinenführer und

espace enveloppe minimal pour les opérateurs (ISO Mindestfreiraum (ISO 3411:2007)

3411:2007)
This European Standard was approved by CEN on 20 June 2007.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European

Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national

standards may be obtained on application to the CEN Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation

under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the

official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,

France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,

Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels

© 2007 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 3411:2007: E

worldwide for CEN national Members.
---------------------- Page: 2 ----------------------
EN ISO 3411:2007 (E)
Foreword

This document (EN ISO 3411:2007) has been prepared by Technical Committee ISO/TC 127

"Earth-moving machinery" in collaboration with Technical Committee CEN/TC 151 "Construction

equipment and building material machines - Safety", the secretariat of which is held by DIN.

This European Standard shall be given the status of a national standard, either by publication of

an identical text or by endorsement, at the latest by January 2008, and conflicting national

standards shall be withdrawn at the latest by July 2010.
This document supersedes EN ISO 3411:1999.

This document has been prepared under a mandate given to CEN by the European Commission

and the European Free Trade Association, and supports essential requirements of EU

Directive(s).

For relationship with EU Directive(s), see informative Annex ZA and ZB which is an integral part

of this document.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of

the following countries are bound to implement this European Standard: Austria, Belgium,

Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece,

Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United

Kingdom.
Endorsement notice

The text of ISO 3411:2007 has been approved by CEN as EN ISO 3411:2007 without any

modifications.
---------------------- Page: 3 ----------------------
EN ISO 3411:2007 (E)
Annex ZA
(informative)
Relationship between this International Standard and the Essential
Requirements of EU Directive 98/37/EC, amended by Directive
98/79/EC

This International Standard has been prepared under a mandate given to CEN by the European

Commission and the European Free Trade Association to provide a means of conforming to

Essential Requirements of the New Approach Directive 98/37/EC, amended by Directive

98/79/EC.

Once this standard is cited in the Official Journal of the European Communities under that

Directive and has been implemented as a national standard in at least one Member State,

compliance with the normative clauses of this standard confers, within the limits of the scope of

this standard, a presumption of conformity with Essential Requirement 3.2.1 (paragraphs 1 and

5) of that Directive and associated EFTA regulations.

WARNING: Other requirements and other EU Directives may be applicable to the products

falling within the scope of this standard.
---------------------- Page: 4 ----------------------
EN ISO 3411:2007 (E)
Annex ZB
(informative)
Relationship between this International Standard and the Essential
Requirements of EU Directive 2006/42/EC

This International Standard has been prepared under a mandate given to CEN by the European

Commission and the European Free Trade Association to provide one means of conforming to

Essential Requirements of the New Approach Directive 2006/42/EC on machinery.

Once this standard is cited in the Official Journal of the European Communities under that

Directive and has been implemented as a national standard in at least one Member State,

compliance with the normative clauses of this standard confers, within the limits of the scope of

this standard, a presumption of conformity with Essential Requirement 1.1.7 (paragraph 3) of

that Directive and associated EFTA regulations.

WARNING: Other requirements and other EU Directives may be applicable to the product(s)

falling within the scope of this standard.
---------------------- Page: 5 ----------------------
INTERNATIONAL ISO
STANDARD 3411
Fourth edition
2007-07-15
Earth-moving machinery — Physical
dimensions of operators and minimum
operator space envelope
Engins de terrassement — Dimensions des opérateurs et espace
enveloppe minimal pour les opérateurs
Reference number
ISO 3411:2007(E)
ISO 2007
---------------------- Page: 6 ----------------------
ISO 3411:2007(E)
PDF disclaimer

This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but

shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In

downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat

accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.

Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation

parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In

the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

COPYRIGHT PROTECTED DOCUMENT
© ISO 2007

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,

electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or

ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2007 – All rights reserved
---------------------- Page: 7 ----------------------
ISO 3411:2007(E)
Contents Page

Foreword............................................................................................................................................................ iv

Introduction ........................................................................................................................................................ v

1 Scope......................................................................................................................................................1

2 Normative references............................................................................................................................1

3 Terms and definitions ...........................................................................................................................1

4 Physical dimensions of operators .......................................................................................................2

5 Minimum operator space envelope......................................................................................................6

Bibliography ......................................................................................................................................................10

© ISO 2007 – All rights reserved iii
---------------------- Page: 8 ----------------------
ISO 3411:2007(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies

(ISO member bodies). The work of preparing International Standards is normally carried out through

ISO technical committees. Each member body interested in a subject for which a technical committee has

been established has the right to be represented on that committee. International organizations, governmental

and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the

International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.

International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.

The main task of technical committees is to prepare International Standards. Draft International Standards

adopted by the technical committees are circulated to the member bodies for voting. Publication as an

International Standard requires approval by at least 75 % of the member bodies casting a vote.

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent

rights. ISO shall not be held responsible for identifying any or all such patent rights.

ISO 3411 was prepared by Technical Committee ISO/TC 127, Earth-moving machinery, Subcommittee SC 2,

Safety requirements and human factors.

This fourth edition cancels and replaces the third edition (ISO 3411:1995), which has been technically revised.

iv © ISO 2007 – All rights reserved
---------------------- Page: 9 ----------------------
ISO 3411:2007(E)
Introduction

The operator dimensions in this International Standard are derived from male and female data from the

United States of America (CAESAR Data), Europe (ISO 15534-3:2000) and Asia (China, Japan, Korea and

Thailand).
th th

The dimensions of the male Asian data were found to be within the range of the 5 and 95 percentiles of the

combined USA and European data. Thus, to represent the operator populations for the USA and Europe, the

operator dimension data are based upon the data from those two regions. To account for the potential

increase in female Asian operators, the small operator dimension values were maintained from

ISO 3411:1995 and used instead of the larger dimensions from the USA and European data.

The dimensions given in this International Standard are either actual measurements obtained from the

sources listed above or, when specific dimensions were not available, were derived by proportionally scaling

the values from ISO 3411:1995, based on the trend of growth seen across the available measured

dimensions.

The operator minimum normal interior space envelope for enclosures stated in this International Standard can

be supplemented or modified by standards for specific earth-moving machinery.
© ISO 2007 – All rights reserved v
---------------------- Page: 10 ----------------------
INTERNATIONAL STAN
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.