EN ISO 5667-23:2011

Water quality - Sampling - Part 23: Guidance on passive sampling in surface waters (ISO 5667-23:2011)

ISO 5667-23:2011 specifies procedures for the determination of time-weighted average concentrations and equilibrium concentrations of the free dissolved fraction of organic and organometallic compounds and inorganic substances, including metals, in surface water by passive sampling, followed by analysis.

Wasserbeschaffenheit - Probenahme - Teil 23: Anleitung zur Anwendung von Passivsammlern in Oberflächengewässern (ISO 5667-23:2011)

Dieser Teil von ISO 5667 legt Verfahren zur Bestimmung von zeitlich gemittelten und Gleichgewichtskonzentrationen
des gelösten Anteils von organischen, organometallischen Verbindungen und anorganischen
Verbindungen, einschließlich Metallen, in Oberflächengewässern durch passive Probenahme mit
anschließender Analyse fest.

Qualité de l'eau - Échantillonnage - Partie 23: Lignes directrices pour l'échantillonnage passif dans les eaux de surface (ISO 5667-23:2011)

L'ISO 5667-23:2011 spécifie des modes opératoires pour la détermination des concentrations moyennes pondérées dans le temps et des concentrations d'équilibre de la fraction libre dissoute des composés organiques et organométalliques ainsi que des substances inorganiques, y compris les métaux, dans les eaux de surface par échantillonnage passif suivi d'une analyse.

Kakovost vode - Vzorčenje - 23. del: Navodilo za pasivno vzorčenje površinskih voda (ISO 5667-23:2011)

Ta del ISO 5667 določa postopke za določevanje časovno tehtanih povprečnih koncentracij in ravnotežnih koncentracij prosto raztopljene frakcije organskih in organokovinskih spojin in anorganskih snovi, vključno s kovinami, v površinski vodi s pasivnim vzorčenjem, ki mu sledi analiza.

General Information

• Status: Published
• Publication Date: 28-Feb-2011
• Withdrawal Date: 29-Sep-2011
• ICS: 13.060.45 - Examination of water in general
• Technical Committee: CEN/TC 230 - Water analysis
• Drafting Committee: CEN/TC 230 - Water analysis
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 01-Mar-2011
• Due Date: 16-Jan-2011
• Completion Date: 01-Mar-2011
• Ref Project: SIST EN ISO 5667-23:2011 - Water quality - Sampling - Part 23: Guidance on passive sampling in surface waters (ISO 5667-23:2011)

Standards Content (Sample)

SLOVENSKI STANDARD
01-junij-2011
1DGRPHãþD
oSIST ISO/DIS 5667-23:2009
.DNRYRVWYRGH9]RUþHQMHGHO1DYRGLOR]DSDVLYQRY]RUþHQMHSRYUãLQVNLK
YRGD,62
Water quality - Sampling - Part 23: Guidance on passive sampling in surface waters (ISO
5667-23:2011)
Wasserbeschaffenheit - Probenahme - Teil 23: Anleitung zur Anwendung von
Passivsammlern (ISO 5667-23:2011)
Qualité de l'eau - Échantillonnage - Partie 23: Lignes directrices pour l'échantillonnage
passif dans les eaux de surface (ISO 5667-23:2011)
Ta slovenski standard je istoveten z: EN ISO 5667-23:2011
ICS:
13.060.45 Preiskava vode na splošno Examination of water in
general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 5667-23
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2011
ICS 13.060.45
English Version
Water quality - Sampling - Part 23: Guidance on passive
sampling in surface waters (ISO 5667-23:2011)
Qualité de l'eau - Échantillonnage - Partie 23: Lignes Wasserbeschaffenheit - Probenahme - Teil 23: Anleitung
directrices pour l'échantillonnage passif dans les eaux de zur Anwendung von Passivsammlern (ISO 5667-23:2011)
surface (ISO 5667-23:2011)
This European Standard was approved by CEN on 27 February 2011.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 5667-23:2011: E
worldwide for CEN national Members.

Contents Page
Foreword .3

Foreword
This document (EN ISO 5667-23:2011) has been prepared by Technical Committee ISO/TC 147 "Water
quality" in collaboration with Technical Committee CEN/TC 230 “Water analysis” the secretariat of which is
held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by September 2011, and conflicting national standards shall be
withdrawn at the latest by September 2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 5667-23:2011 has been approved by CEN as a EN ISO 5667-23:2011 without any
modification.
INTERNATIONAL ISO
STANDARD 5667-23
First edition
2011-03-01
Water quality — Sampling —
Part 23:
Guidance on passive sampling in surface
waters
Qualité de l'eau — Échantillonnage —
Partie 23: Lignes directrices pour l'échantillonnage passif dans les eaux
de surface
Reference number
ISO 5667-23:2011(E)
©
ISO 2011
ISO 5667-23:2011(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

©  ISO 2011
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
ii © ISO 2011 – All rights reserved

ISO 5667-23:2011(E)
Contents Page
Foreword .iv
Introduction.vi
1 Scope.1
2 Normative references.1
3 Terms and definitions .2
4 Principle .3
5 Handling passive sampling devices.4
5.1 General .4
5.2 Passive sampling devices for organic compounds.5
5.3 Passive sampling devices for metals.5
6 Estimation of appropriate field deployment time.6
7 Passive sampling device preparation and assembly .6
7.1 Passive sampling device preparation .6
7.2 Passive sampling device assembly.7
7.3 Passive sampling device storage.7
8 Quality assurance.7
8.1 General .7
8.2 Replicate passive sampling devices in field deployment .7
8.3 Replicate quality control passive sampling devices .7
8.4 Passive sampling device controls.8
9 Selection of sampling site and safety precautions.9
9.1 Selection of sampling site .9
9.2 Appropriate precautions against accidents .9
10 Passive sampling device deployment and retrieval .10
10.1 Materials and apparatus .10
10.2 Transport.10
10.3 Deployment procedure .10
10.4 Retrieval procedure.11
11 Extraction of analytes from passive sampling devices and preparation for analysis .12
12 Analysis.12
13 Calculations .13
14 Test report.15
Annex A (informative) Tables providing a summary of the main types of passive sampling
devices and a summary of the methods for their calibration.17
Annex B (normative) Materials and apparatus to be taken to the field for use in the deployment of
passive sampling devices .19
Annex C (informative) Quality control measures .20
Bibliography.22

ISO 5667-23:2011(E)
Foreword
SO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 5667-23 was prepared by Technical Committee ISO/TC 147, Water quality, Subcommittee 6, Sampling
(general methods).
ISO 5667 consists of the following parts, under the general title Water quality — Sampling:
⎯ Part 1: Guidance on the design of sampling programmes and sampling techniques
⎯ Part 3: Preservation and handling of water samples
⎯ Part 4: Guidance on sampling from lakes, natural and man-made
⎯ Part 5: Guidance on sampling of drinking water from treatment works and piped distribution systems
⎯ Part 6: Guidance on sampling of rivers and streams
⎯ Part 7: Guidance on sampling of water and steam in boiler plants
⎯ Part 8: Guidance on the sampling of wet deposition
⎯ Part 9: Guidance on sampling from marine waters
⎯ Part 10: Guidance on sampling of waste waters
⎯ Part 11: Guidance on sampling of groundwaters
⎯ Part 12: Guidance on sampling of bottom sediments
⎯ Part 13: Guidance on sampling of sludges
⎯ Part 14: Guidance on quality assurance of environmental water sampling and handling
⎯ Part 15: Guidance on the preservation and handling of sludge and sediment samples
⎯ Part 16: Guidance on biotesting of samples
iv © ISO 2011 – All rights reserved

ISO 5667-23:2011(E)
⎯ Part 17: Guidance on sampling of bulk s
...