EN ISO 8030:2014

Rubber and plastics hoses - Method of test for flammability (ISO 8030:2014)

ISO 8030:2014 specifies a method for assessing the flammability of hoses, except for hoses intended for use with petroleum fuels for combustion engines. The method is restricted to hoses of sizes up to and including nominal bore of 50 mm.

Gummi- und Kunststoffschläuche - Verfahren zur Prüfung der Entflammbarkeit (ISO 8030:2014)

Diese Internationale Norm legt ein Verfahren zur Beurteilung der Entflammbarkeit von Schläuchen fest, ausgenommen Schläuche für die Verwendung mit Benzin für Verbrennungsmotoren. Das Verfahren ist begrenzt auf Schläuche mit Nenndurchmessern bis zu 50 mm.
ANMERKUNG 1   Der Anwender wird auf die entsprechende Schlauchnorm mit den Anforderungen hinsichtlich Brennen und Nachglühen verwiesen.
ANMERKUNG 2   Das Verfahren für die Prüfung der Entflammbarkeit von Schläuchen für die Verwendung mit Benzin ist festgelegt in ISO 13774.

Tuyaux en caoutchouc et en plastique - Méthode d'essai d'inflammabilité (ISO 8030:2014)

L'ISO 8030:2014 spécifie une méthode pour l´évaluation de l'inflammabilité des tuyaux en caoutchouc et en plastique, à l'exception des tuyaux prévus pour être utilisés avec les carburants pétroliers dans les moteurs à combustion. La méthode est limitée aux tuyaux ayant un diamètre intérieur nominal inférieur ou égal à 50 mm.

Gumene in polimerne cevi - Metoda preskušanja vnetljivosti (ISO 8030:2014)

Standard EN ISO 8030 določa metodo za ocenjevanje vnetljivosti cevi z izjemo cevi, namenjenih uporabi z naftnimi gorivi pri motorjih z izgorevanjem. Metoda je omejena na cevi z največjo velikostjo in nazivnim premerom 50 mm.

General Information

• Status: Published
• Publication Date: 15-Jul-2014
• Withdrawal Date: 30-Jan-2015
• ICS: 13.220.40 - Ignitability and burning behaviour of materials and products
• ICS: 23.040.70 - Hoses and hose assemblies
• Technical Committee: CEN/TC 218 - Rubber and plastics hoses and hose assemblies
• Drafting Committee: CEN/TC 218 - Rubber and plastics hoses and hose assemblies
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 16-Jul-2014
• Completion Date: 16-Jul-2014
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Ref Project: SIST EN ISO 8030:2014 - Rubber and plastics hoses - Method of test for flammability (ISO 8030:2014)

Relations

• Replaces: EN ISO 8030:1997 - Rubber and plastics hoses - Method of test for flammability (ISO 8030:1995)
• Effective Date: 23-Jul-2014

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 8030:2014
01-oktober-2014
1DGRPHãþD
SIST EN ISO 8030:2000
Gumene in polimerne cevi - Metoda preskušanja vnetljivosti (ISO 8030:2014)
Rubber and plastics hoses - Method of test for flammability (ISO 8030:2014)
Gummi- und Kunststoffschläuche - Verfahren zur Prüfung der Entflammbarkeit (ISO
8030:2014)
Tuyaux en caoutchouc et en plastique - Méthode d'essai d'inflammabilité (ISO
8030:2014)
Ta slovenski standard je istoveten z: EN ISO 8030:2014
ICS:
13.220.40 Sposobnost vžiga in Ignitability and burning
obnašanje materialov in behaviour of materials and
proizvodov pri gorenju products
83.140.40 Gumene cevi Hoses
SIST EN ISO 8030:2014 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 8030:2014

---------------------- Page: 2 ----------------------

SIST EN ISO 8030:2014

EUROPEAN STANDARD
EN ISO 8030

NORME EUROPÉENNE

EUROPÄISCHE NORM
July 2014
ICS 23.040.70; 13.220.40 Supersedes EN ISO 8030:1997
English Version
Rubber and plastics hoses - Method of test for flammability (ISO
8030:2014)
Tuyaux en caoutchouc et en plastique - Méthode d'essai Gummi- und Kunststoffschläuche - Verfahren zur Prüfung
d'inflammabilité (ISO 8030:2014) der Entflammbarkeit (ISO 8030:2014)
This European Standard was approved by CEN on 28 June 2014.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 8030:2014 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 8030:2014
EN ISO 8030:2014 (E)
Contents Page
Foreword .3
2

---------------------- Page: 4 ----------------------

SIST EN ISO 8030:2014
EN ISO 8030:2014 (E)
Foreword
This document (EN ISO 8030:2014) has been prepared by Technical Committee ISO/TC 45 “Rubber and
rubber products” in collaboration with Technical Committee CEN/TC 218 “Rubber and plastics hoses and
hose assemblies” the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by January 2015, and conflicting national standards shall be withdrawn at
the latest by January 2015.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 8030:1997.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 8030:2014 has been approved by CEN as EN ISO 8030:2014 without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 8030:2014

---------------------- Page: 6 ----------------------

SIST EN ISO 8030:2014
INTERNATIONAL ISO
STANDARD 8030
Third edition
2014-07-15
Rubber and plastics hoses — Method
of test for flammability
Tuyaux en caoutchouc et en plastique — Méthode d’essai
d’in
...